Excelics EID1515-10 15.35-15.75 ghz 10-watt internally matched power fet Datasheet

EID1515-10
UPDATED 12/21/2006
15.35-15.75 GHz 10-Watt Internally Matched Power FET
Excelics
FEATURES
•
•
•
•
•
•
.827±.010 .669
15.35– 15.75GHz Bandwidth
Input/Output Impedance Matched to 50 Ohms
+40.0 dBm Output Power at 1dB Compression
5.5 dB Power Gain at 1dB Compression
20% Power Added Efficiency
Hermetic Metal Flange Package
.024
EID1515-10
.421
.120 MIN
.120 MIN
YYWW
SN
.004
.125
.063
.508±.008
.442
.004
.168±.010
.105±.008
ALL DIMENSIONS IN INCHES
Caution! ESD sensitive device.
ELECTRICAL CHARACTERISTICS (Ta = 25°C)
PARAMETERS/TEST CONDITIONS1
SYMBOL
P1dB
G1dB
∆G
PAE
Output Power at 1dB Compression
f = 15.35-15.75GHz
VDS = 10 V, IDSQ ≈ 3200mA
Gain at 1dB Compression
f = 15.35-15.75GHz
VDS = 10 V, IDSQ ≈ 3200mA
Gain Flatness
f = 15.35-15.75GHz
VDS = 10 V, IDSQ ≈ 3200mA
Power Added Efficiency at 1dB Compression
f = 15.35-15.75GHz
VDS = 10 V, IDSQ ≈ 3200mA
Id1dB
Drain Current at 1dB Compression
IDSS
Saturated Drain Current
VP
Pinch-off Voltage
RTH
MIN
TYP
39.0
40.0
dBm
4.5
5.5
dB
f = 15.35-15.75GHz
MAX
UNITS
±0.6
dB
22
%
3500
4500
mA
VDS = 3 V, VGS = 0 V
5000
7500
mA
VDS = 3 V, IDS = 60 mA
-1.0
-2.5
2
Thermal Resistance
2.5
3.0
V
o
C/W
Note:
1. Tested with 50 Ohm gate resistor.
2. Overall Rth depends on case mounting.
MAXIMUM RATING1,2 (Ta = 25°C)
SYMBOLS
VDS
VGS
Igsf
Igsr
Pin
Tch
Tstg
Pt
ABSOLUTE1
CONTINUOUS2
Drain-Source Voltage
15V
10V
Gate-Source Voltage
-5V
-3V
Forward Gate Current
120mA
40mA
Reverse Gate Current
-18mA
-6mA
Input Power
39.0dBm
@ 3dB Compression
Channel Temperature
o
175 C
175 oC
Storage Temperature
o
-65 to +175 C
-65 to +175 oC
Total Power Dissipation
50W
50W
PARAMETERS
Note:
1. Exceeding any of the above ratings may result in permanent damage.
2. Exceeding any of the above ratings may reduce MTTF below design goals.
Specifications are subject to change without notice.
Excelics Semiconductor, Inc. 310 De Guigne Drive, Sunnyvale, CA 94085
page 1 of 2
Phone: 408-737-1711 Fax: 408-737-1868 Web: www.excelics.com
Revised December 2006
EID1515-10
UPDATED 12/21/2006
15.35-15.75 GHz 10-Watt Internally Matched Power FET
DISCLAIMER
EXCELICS SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY
PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. EXCELICS DOES NOT ASSUME ANY
LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN.
LIFE SUPPORT POLICY
EXCELICS SEMICONDUCTOR PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE
SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF EXCELICS SEMICONDUCTOR,
INC. AS HERE IN:
1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body,
or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for
use provided in the labeling, can be reasonably expected to result in significant injury to the user.
2. A critical component is any component of a life support device or system whose failure to perform can be
reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness
Specifications are subject to change without notice.
Excelics Semiconductor, Inc. 310 De Guigne Drive, Sunnyvale, CA 94085
page 2 of 2
Phone: 408-737-1711 Fax: 408-737-1868 Web: www.excelics.com
Revised December 2006
Similar pages