ACTS125MS Radiation Hardened Quad Buffer, Three-State January 1996 Features Pinouts • Devices QML Qualified in Accordance with MIL-PRF-38535 • Detailed Electrical and Screening Requirements are Contained in SMD# 5962-96715 and Intersil’ QM Plan 14 PIN CERAMIC DUAL-IN-LINE MIL-STD-1835 DESIGNATOR, CDIP2-T14, LEAD FINISH C TOP VIEW • 1.25 Micron Radiation Hardened SOS CMOS • Total Dose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . >300K RAD (Si) -10 • Single Event Upset (SEU) Immunity: <1 x 10 (Typ) Errors/Bit/Day • SEU LET Threshold . . . . . . . . . . . . . . . . . . . . . . . >100 MEV-cm2/mg OE1 1 14 VCC A1 2 13 OE4 Y1 3 12 A4 OE2 4 11 Y4 A2 5 10 OE3 • Dose Rate Upset . . . . . . . . . . . . . . . . >1011 RAD (Si)/s, 20ns Pulse Y2 6 9 A3 • Dose Rate Survivabilty . . . . . . . . . . . >1012 RAD (Si)/s, 20ns Pulse GND 7 8 Y3 • Latch-Up Free Under Any Conditions • Military Temperature Range . . . . . . . . . . . . . . . . . . -55oC to +125oC • Significant Power Reduction Compared to ALSTTL Logic • DC Operating Voltage Range . . . . . . . . . . . . . . . . . . . . 4.5V to 5.5V • Input Logic Levels - VIL = 0.8V Max - VIH = VCC/2 Min • Input Current ≤ 1µA at VOL, VOH • Fast Propagation Delay . . . . . . . . . . . . . . . . 17ns (Max), 11ns (Typ) Description 14 PIN CERAMIC FLATPACK MIL-STD-1835 DESIGNATOR, CDFP3-F14 LEAD FINISH C TOP VIEW OE1 1 14 VCC A1 2 13 OE4 Y1 3 12 A4 OE2 4 11 Y4 A2 5 10 OE3 Y2 6 9 A3 GND 7 8 Y3 The Intersil ACTS125MS is a Radiation Hardened Quad Buffer with Three-State outputs. Each output has it’s own enable input, which when “HIGH” puts the output in a high impedance state. The ACTS125MS utilizes advanced CMOS/SOS technology to achieve high-speed operation. This device is a member of radiation hardened, high-speed, CMOS/SOS Logic Family. The ACTS125MS is supplied in a 14 lead Ceramic flatpack (K suffix) or a Ceramic Dual-In-Line Package (D suffix). Ordering Information PART NUMBER TEMPERATURE RANGE SCREENING LEVEL PACKAGE 5962F9671501VCC -55oC to +125oC MIL-PRF-38535 Class V 14 Lead SBDIP 5962F9671501VXC -55oC to +125oC MIL-PRF-38535 Class V 14 Lead Ceramic Flatpack ACTS125D/Sample 25oC Sample 14 Lead SBDIP ACTS125K/Sample 25oC Sample 14 Lead Ceramic Flatpack ACTS125HMSR 25oC Die Die CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures. http://www.intersil.com or 407-727-9207 | Copyright © Intersil Corporation 1999 1 Spec Number File Number 518826 3566.1 ACTS125MS Functional Diagram P Yn An n OEn TRUTH TABLE INPUTS OUTPUT An OEn Yn L L L H L H X H Z NOTE: L = Low, H = High, X = Don’t Care, Z = High Impedance Spec Number 2 518826 ACTS125MS Die Characteristics DIE DIMENSIONS: 88 x 88 (mils) 2.24 x 2.24 (mm) METALLIZATION: Type: AlSi Metal 1 Thickness: 7.125kÅ ± 1.125kÅ Metal 2 Thickness: 9kÅ ± 1kÅ GLASSIVATION: Type: SiO2 Thickness: 8kÅ ± 1kÅ WORST CASE CURRENT DENSITY: <2.0 x 105 A/cm2 BOND PAD SIZE: > 4.3 x 4.3 (mils) > 110 x 110 (µm) Metallization Mask Layout ACTS125MS A1 (2) OE1 (1) VCC (14) OE4 (13) Y1 (3) (12) A4 OE2 (4) (11) Y4 NC NC (10) OE3 A2 (5) (6) Y2 (7) GND (8) Y3 (9) A3 Spec Number 3 518826 ACTS125MS All Intersil semiconductor products are manufactured, assembled and tested under ISO9000 quality systems certification. Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design and/or specifications at any time without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries. For information regarding Intersil Corporation and its products, see web site http://www.intersil.com Sales Office Headquarters NORTH AMERICA Intersil Corporation P. O. Box 883, Mail Stop 53-204 Melbourne, FL 32902 TEL: (407) 724-7000 FAX: (407) 724-7240 EUROPE Intersil SA Mercure Center 100, Rue de la Fusee 1130 Brussels, Belgium TEL: (32) 2.724.2111 FAX: (32) 2.724.22.05 ASIA Intersil (Taiwan) Ltd. Taiwan Limited 7F-6, No. 101 Fu Hsing North Road Taipei, Taiwan Republic of China TEL: (886) 2 2716 9310 FAX: (886) 2 2715 3029 Spec Number 4