P-DUKE FDC20-12T3315 20 watts dc-dc converter Datasheet

FDC20(W) SERIES
20 WATTS
DC-DC CONVERTER
FEATURES
• 20 WATTS OUTPUT POWER
• OUTPUT CURRENT UP TO 4A
• STANDARD 2.00 X 1.60 X 0.40 INCH PACKAGE
• HIGH EFFICIENCY UP TO 87%
• 2:1 AND 4:1 WIDE INPUT VOLTAGE RANGE
• SIX-SIDED CONTINUOUS SHIELD
• FIXED SWITCHING FREQUENCY
• UL60950-1, EN60950-1, & IEC60950-1 SAFETY APPROVALS
• CE MARKED
• COMPLIANT TO RoHS II & REACH
APPLICATIONS
Wireless Network
Telecom/Datacom
Industry Control System
Measurement Equipment
Semiconductor Equipment
DESCRIPTION
The FDC20 and FDC20W series offer 20 Watts of output power from a
2.00 x 1.60 x 0.40 inch package. The FDC20 series with 2:1 wide input voltage
of 9~18VDC, 18~36VDC and 36~75VDC. The FDC20W series with 4:1 wide
input voltage of 9~36VDC and 18~75VDC.
T E C H N I C A L S P E C I F I C AT I O N
All specifications are typical at nominal input, full load and 25ºC otherwise noted
INPUT SPECIFICATIONS
OUTPUT SPECIFICATIONS
20 Watts, max.
Single & Dual
± 1%
Voltage accuracy
± 1%
Triple 3.3V/5V
± 5%
Auxiliary
Minimum load (Note 6)
See Table
Voltage adjustability
± 10%
Single (W)
± 0.2%
Dual (W)
± 0.5%
Line regulation
LL to HL at Full Load
Triple 3.3V/5V
± 1%
± 5%
Auxiliary
Single
± 0.5%
± 3%
Dual
Load regulation Min. Load to Full Load
± 2%
Triple 3.3V/5V
± 5%
Auxiliary
Dual
± 5%
Cross regulation (Note 7)
Triple 3.3V/5V
± 2%
Auxiliary
± 5%
Ripple and noise 20MHz bandwidth
See table
±0.02% / ºC, max.
Temperature coefficient
Single
250µs
Transient response
25% load step change
Dual
250µs
recovery time
Triple
500µs
3.3VDC output
3.9VDC
Over voltage protection 5VDC output
6.2VDC
Zener diode clamp
12VDCoutput
15VDC
15VDC output
18VDC
Over load protection
% of FL at nominal input
150%, max.
Short circuit protection
Continuous, automatics recovery
FDC20
Output power
GENERAL SPECIFICATIONS
Efficiency
Isolation voltage
Isolation resistance
Input to Output
Input(Output) to Case
500VDC
Isolation capacitance
Switching frequency
Safety approvals
See table
1600VDC, min. 1minute
1600VDC, min. 1minute
9
10 ohms, min.
300pF, max.
300kHz±10%
IEC60950-1, UL60950-1, & EN60950-1
Case material
Nickel-coated copper
Base material
Non-conductive black plastic
Potting material
Weight
Page 1 of 3
FDC20W
9 ~ 18VDC
18 ~ 36VDC
36 ~ 75VDC
9 ~ 36VDC
18 ~ 75VDC
Pi type
36VDC 100ms, max.
50VDC 100ms, max.
100VDC 100ms, max.
25mAp-p
Input filter
12VDC input
24VDC input
48VDC input
Input reflected ripple current
Nominal input and
Start up time
20ms
Power up
constant resistive load
Remote ON/OFF (Note 8)
(Positive logic)
DC-DC ON
Open or 3.5V < Vr < 12V
DC-DC OFF
Short or 0V < Vr < 1.2V
Input current of remote control pin Nominal input
-0.5~1.0mA
Remote off state input current
Nominal input
20mA
Input surge voltage
ENVIRONMENTAL SPECIFICATIONS
Operating ambient temperature
-40ºC ~ +85ºC (with derating)
Maximum case temperature
+100ºC
Storage temperature range
-55ºC ~ +125ºC
Natural convection
10ºC/watt
Thermal impedance (Note 9)
Natural convection with heat-sink 8.24ºC/watt
Thermal shock
MIL-STD-810F
Vibration
MIL-STD-810F
Relative humidity
5% to 95% RH
EMC CHARACTERISTICS
EMI (Note 10)
EN55022
Air
Contact
Class A, Class B
± 8kV
Perf. Criteria B
± 6kV
ESD
EN61000-4-2
Radiated immunity
EN61000-4-3
10 V/m Perf. Criteria A
Fast transient (Note 11) EN61000-4-4
± 2kV Perf. Criteria B
Surge (Note 11)
EN61000-4-5
± 1kV Perf. Criteria B
Conducted immunity
EN61000-4-6
10 Vr.m.s Perf. Criteria A
Epoxy (UL94 V-0)
2.00 X 1.60 X 0.40 Inch
(50.8 X 40.6 X 10.2 mm)
48g (1.69oz)
Dimensions
MTBF (Note 1)
Input voltage range
12VDC nominal input
24VDC nominal input
48VDC nominal input
24VDC nominal input
48VDC nominal input
MIL-HDBK-217F
1.922 x 106 hrs
www.pduke.com
2014/4/30
FDC20(W) SERIES
20 WATTS
Model
Number
Input Range
FDC20-12S33
FDC20-12S05
FDC20-12S12
FDC20-12S15
FDC20-12D05
FDC20-12D12
FDC20-12D15
FDC20-12T3312
FDC20-12T3315
FDC20-12T0512
FDC20-12T0515
FDC20-24S33 (W)
FDC20-24S05 (W)
FDC20-24S12 (W)
FDC20-24S15 (W)
FDC20-24D05 (W)
FDC20-24D12 (W)
FDC20-24D15 (W)
FDC20-24T3312
FDC20-24T3315
FDC20-24T0512
FDC20-24T0515
FDC20-48S33 (W)
FDC20-48S05 (W)
FDC20-48S12 (W)
FDC20-48S15 (W)
FDC20-48D05 (W)
FDC20-48D12 (W)
FDC20-48D15 (W)
FDC20-48T3312
FDC20-48T3315
FDC20-48T0512
FDC20-48T0515
9 ~ 18 VDC
9 ~ 18 VDC
9 ~ 18 VDC
9 ~ 18 VDC
9 ~ 18 VDC
9 ~ 18 VDC
9 ~ 18 VDC
9 ~ 18 VDC
9 ~ 18 VDC
9 ~ 18 VDC
9 ~ 18 VDC
18 ~ 36 (9 ~ 36) VDC
18 ~ 36 (9 ~ 36) VDC
18 ~ 36 (9 ~ 36) VDC
18 ~ 36 (9 ~ 36) VDC
18 ~ 36 (9 ~ 36) VDC
18 ~ 36 (9 ~ 36) VDC
18 ~ 36 (9 ~ 36) VDC
18 ~ 36 VDC
18 ~ 36 VDC
18 ~ 36 VDC
18 ~ 36 VDC
36 ~ 75 (18 ~ 75) VDC
36 ~ 75 (18 ~ 75) VDC
36 ~ 75 (18 ~ 75) VDC
36 ~ 75 (18 ~ 75) VDC
36 ~ 75 (18 ~ 75) VDC
36 ~ 75 (18 ~ 75) VDC
36 ~ 75 (18 ~ 75) VDC
36 ~ 75 VDC
36 ~ 75 VDC
36 ~ 75 VDC
36 ~ 75 VDC
(12)
Output
Voltage
Output Current
Min. load Full load
DC-DC CONVERTER
(2)
(3)
(4)
Capacitor
Load max
77
80
83
84
82
83
83
79
79
80
80
79 (76)
81 (79)
86 (81)
86 (81)
85 (79)
86 (82)
86 (82)
82
79
83
83
79 (77)
82 (80)
86 (82)
86 (82)
85 (81)
87 (83)
87 (83)
82
82
84
84
13000µF
6800µF
2200µF
755µF
± 3400µF
± 680µF
± 450µF
4700 / ± 220µF
4700 / ± 220µF
4700 / ± 220µF
4700 / ± 220µF
13000µF
6800µF
2200µF
755µF
± 3400µF
± 680µF
± 450µF
4700 / ± 220µF
4700 / ± 220µF
4700 / ± 220µF
4700 / ± 220µF
13000µF
6800µF
2200µF
755µF
± 3400µF
± 680µF
± 450µF
4700 / ± 220µF
4700 / ± 220µF
4700 / ± 220µF
4700 / ± 220µF
Output
No load
Eff
Ripple & Noise Input Current (%)
3.3 VDC
5 VDC
12 VDC
15 VDC
± 5 VDC
± 12 VDC
± 15 VDC
280mA
280mA
134mA
106mA
± 140mA
± 67mA
± 53mA
4000mA
4000mA
1670mA
1330mA
± 2000mA
± 833mA
± 666mA
75mVp-p
75mVp-p
75mVp-p
75mVp-p
100mVp-p
100mVp-p
100mVp-p
3.3 / ± 12 VDC
3.3 / ± 15 VDC
5 / ± 12 VDC
300 / ± 30mA
300 / ± 25mA
200 / ± 30mA
3000 / ± 300mA
3000 / ± 250mA
2000 / ± 300mA
50/ ± 120mVp-p
50/ ± 150mVp-p
50/ ± 120mVp-p
5 / ± 15 VDC
200 / ± 25mA
2000 / ± 250mA
50/ ± 150mVp-p
3.3 VDC
5 VDC
12 VDC
15 VDC
± 5 VDC
± 12 VDC
± 15 VDC
280mA
280mA
134mA
106mA
± 140mA
± 67mA
± 53mA
4000mA
4000mA
1670mA
1330mA
± 2000mA
± 833mA
± 666mA
75mVp-p
75mVp-p
75mVp-p
75mVp-p
100mVp-p
100mVp-p
100mVp-p
3.3 / ± 12 VDC
3.3 / ± 15 VDC
300 / ± 30mA
300 / ± 25mA
3000 / ± 300mA
3000 / ± 250mA
50/ ± 120mVp-p
50/ ± 150mVp-p
5 / ± 12 VDC
5 / ± 15 VDC
200 / ± 30mA
200 / ± 25mA
2000 / ± 300mA
2000 / ± 250mA
50/ ± 120mVp-p
50/ ± 150mVp-p
3.3 VDC
5 VDC
12 VDC
15 VDC
± 5 VDC
± 12 VDC
± 15 VDC
280mA
280mA
134mA
106mA
± 140mA
± 67mA
± 53mA
4000mA
4000mA
1670mA
1330mA
± 2000mA
± 833mA
± 666mA
75mVp-p
75mVp-p
75mVp-p
75mVp-p
100mVp-p
100mVp-p
100mVp-p
3.3 / ± 12 VDC
3.3 / ± 15 VDC
300 / ± 30mA
300 / ± 25mA
3000 / ± 300mA
3000 / ± 250mA
50/ ± 120mVp-p
50/ ± 150mVp-p
5 / ± 12 VDC
5 / ± 15 VDC
200 / ± 30mA
200 / ± 25mA
2000 / ± 300mA
2000 / ± 250mA
50/ ± 120mVp-p
50/ ± 150mVp-p
40mA
15mA
40mA
20mA
15mA
35mA
35mA
20mA
35mA
20mA
40mA
10(20)mA
10(10)mA
10(20)mA
15(20)mA
20(15)mA
25(20)mA
30(25)mA
20mA
20mA
25mA
10mA
10(15)mA
10(10)mA
15(10)mA
25(10)mA
15(10)mA
15(15)mA
20(20)mA
10mA
10mA
15mA
15mA
(5)
FDC20-24D3305 and FDC20-48D3305, Output 3.3V(3A)/5V(2A), Detail Spec. Contact Factory.
Note
1.
2.
3.
4.
5.
6.
MIL-HDBK-217F @Ta=25 ºC, Full load.
Typical value at nominal input and full load. (20MHZ BW.)
Typical value at nominal input and no load.
Typical value at nominal input and full load.
Test by minimum input and constant resistive load.
The output requires a minimum loading on the output to maintain specified regulation. Operation under no-load condition will not damage these
devices, however they may not meet all listed specification.
7. Cross regulation : Dual output—Asymmetrical load 25% to 100% full load
Triple output – 3.3VDC output / 5VDC output 100% load and one of auxiliary 100% load, other auxiliary load change from 25% to 100% load
8. The CTRL pin voltage is referenced to -INPUT
9. Heat-sink is optional and P/N: 7G-0011C-F and the operation temperature range please see curve.
10. The FDC20 series standard module meets EN55022 Class A and Class B with external components.
For more detail information, please contact with P-DUKE.
11. An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5.
The filter capacitor Power Mate suggest: Nippon chemi-con KY series, 220 F/100V.
12. The FDC20-24D3305 and FDC20-48D3305 are safety approval pending.
CAUTION: This power module is not internally fused. An input line fuse must always be used.
μ
Page 2 of 3
www.pduke.com
2014/4/30
FDC20(W) SERIES
FDC20-48S05 Derating Curve
DC-DC CONVERTER
120
120
O U T P U T P O W E R (% )
O U T P U T P O W E R (% )
20 WATTS
100
80
60
40
20
0
100
80
60
40
20
0
-40
-20
0
20
40
60
56.1
80
100
120
-40
AMBIENT TEMPERATURE(℃)
E F F IC IE N C Y (% )
85%
83%
81%
79%
77%
75%
36
40
44
48
52
56
60
64
-20
0
20
63.8
40
60
80
100
120
AMBIENT TEMPERATURE(℃ )
FDC20-48S05
Efficiency VS Input Voltage
E F F IC IE N C Y (% )
FDC20-48S05 Derating Curve
With Heatsink (Note
(Note 59))
68
72
95
90
85
80
75
70
65
60
55
50
45
FDC20-48S05
Efficiency VS Output Load
10
INPUT VOLTAGE (V)
20
30
40
50
60
70
80
90
100
OUTPUT LOAD (% of Full Load)
MECHANICAL DRAWING
1. All dimensions in Inch (mm)
Tolerance: X.XX±0.02 (X.X±0.5)
X.XXX±0.01 (X.XX±0.25)
2. Pin pitch tolerance ±0.01(0.25)
3. Pin dimension tolerance ±0.004 (0.1)
PIN CONNECTION
EXTERNAL OUTPUT TRIMMING
PIN
SINGLE
DUAL
TRIPLE
1
+INPUT
+INPUT
+INPUT
2
-INPUT
-INPUT
-INPUT
4
CTRL
CTRL
CTRL
5
NO PIN
+OUTPUT
+ AUXILIARY
6
+OUTPUT
COMMON
+3.3V / +5V
7
-OUTPUT
-OUTPUT
COMMON
8
TRIM
TRIM
- AUXILIARY
Page 3 of 3
Output can be externally trimmed by
using the method shown below.
( ) for dual output trim
TRIM UP
TRIM DOWN
7(7)
8(8)
RU
8(8)
www.pduke.com
RD
6(5)
2014/4/30
Similar pages