Illumination LUXEON CoB with CrispColor Technology™ Fashion retail lighting that makes an impact, highlighting rich colors and increasing contrast The LUXEON CoB with CrispColor Technology LED is the ultimate solution that makes colors pop and makes fabrics come to life. With efficient solid state lighting technology, the contrast of colors has never been so vivid. Our special phosphor technology has created a higher gamut color rendering than existing solutions with a specific color point below the Black Body Line to allow for Class A products. Combined with industry leading performance, LUXEON CoB with CrispColor Technology creates a highly impactful retail experience with all of the advantages of our LUXEON CoB range, including lowest Rth, small Light Emitting Surface (LES) and 3-step MacAdam ellipse color definition, which is tested at 85°C. Features and BENEFITS Primary Applications Highest flux densities with industry’s smallest Light Emitting Surface (LES) Downlights 3-step MacAdam ellipse color definition: Freedom from Binning for color consistency from luminaire to luminaire Up to 4x lower thermal resistance than competition, enabling smaller heatsinks and higher lumens Supported by a comprehensive optical, mechanical and electrical ecosystem PB165 LUXEON CoB with CrispColor Technology Product Brief ©2016 Lumileds Holding B.V. All rights reserved. Indoor Area Lighting Lamps Spotlights LUXEON CoB with CrispColor Technology product performance at specified test current, Tj=85°C. Product LUXEON CoB 1202s LUXEON CoB 1202 LUXEON CoB 1203 LUXEON CoB 1204 LUXEON CoB 1205 LUXEON CoB 1208 Luminous Flux [1] (lm) Test Current (mA) LES (mm) Part Number Minimum Typical Typical Luminous Efficacy (lm/W) 90 588 653 95 200 6 L2C5-27HG1202E0600 3000K 90 648 700 101 200 6 L2C5-30HG1202E0600 3250K 90 675 720 104 200 6 L2C5-33HG1202E0600 3500K 90 656 729 106 200 6 L2C5-35HG1202E0600 4000K 90 690 767 111 200 6 L2C5-40HG1202E0600 5000K 90 716 796 115 200 6 L2C5-50HG1202E0600 2700K 90 613 681 99 200 9 L2C5-27HG1202E0900 3000K 90 648 720 104 200 9 L2C5-30HG1202E0900 3250K 90 675 750 109 200 9 L2C5-33HG1202E0900 3500K 90 683 759 110 200 9 L2C5-35HG1202E0900 4000K 90 720 800 116 200 9 L2C5-40HG1202E0900 Nominal CCT Minimum CRI [1, 2, 3] 2700K 5000K 90 748 831 120 200 9 L2C5-50HG1202E0900 2700K 90 907 1008 97 300 9 L2C5-27HG1203E0900 3000K 90 972 1080 104 300 9 L2C5-30HG1203E0900 3250K 90 1017 1130 109 300 9 L2C5-33HG1203E0900 3500K 90 1035 1150 111 300 9 L2C5-35HG1203E0900 4000K 90 1066 1184 114 300 9 L2C5-40HG1203E0900 5000K 90 1106 1229 119 300 9 L2C5-50HG1203E0900 2700K 90 1424 1582 101 450 13 L2C5-27HG1204E1300 3000K 90 1494 1660 106 450 13 L2C5-30HG1204E1300 3250K 90 1575 1750 112 450 13 L2C5-33HG1204E1300 3500K 90 1594 1771 113 450 13 L2C5-35HG1204E1300 4000K 90 1656 1840 117 450 13 L2C5-40HG1204E1300 5000K 90 1737 1930 123 450 13 L2C5-50HG1204E1300 2700K 90 1850 2055 98 600 13 L2C5-27HG1205E1300 3000K 90 1953 2170 103 600 13 L2C5-30HG1205E1300 3250K 90 2034 2260 108 600 13 L2C5-33HG1205E1300 3500K 90 2070 2300 110 600 13 L2C5-35HG1205E1300 4000K 90 2172 2413 115 600 13 L2C5-40HG1205E1300 5000K 90 2255 2506 119 600 13 L2C5-50HG1205E1300 2700K 90 2775 3083 98 900 15 L2C5-27HG1208E1500 3000K 90 2970 3300 105 900 15 L2C5-30HG1208E1500 3250K 90 3105 3450 110 900 15 L2C5-33HG1208E1500 3500K 90 3105 3450 110 900 15 L2C5-35HG1208E1500 4000K 90 3263 3626 116 900 15 L2C5-40HG1208E1500 5000K 90 3389 3766 120 900 15 L2C5-50HG1208E1500 Notes: 1. Lumileds maintains a tolerance of ±2 on CRI and ±6.5% on luminous flux measurements. 2. Typical CRI is approximately 2 points higher than the minimum CRI specified, but this is not guaranteed. 3. R9 value of 90CRI products is >50. PB165 LUXEON CoB with CrispColor Technology Product Brief 20161102 ©2016 Lumileds Holding B.V. All rights reserved. 2 LUXEON CoB with CrispColor Technology product performance at specified test current, Tj=85°C (continued). Product Nominal CCT Minimum CRI [1, 2, 3] 2700K 90 LUXEON CoB 1211 LUXEON CoB 1216 Luminous Flux [1] (lm) Test Current (mA) LES (mm) Part Number 19 L2C5-27HG1211E1900 Minimum Typical Typical Luminous Efficacy (lm/W) 3803 4226 101 1200 3000K 90 4023 4470 107 1200 19 L2C5-30HG1211E1900 3250K 90 4190 4656 111 1200 19 L2C5-33HG1211E1900 3500K 90 4264 4738 113 1200 19 L2C5-35HG1211E1900 4000K 90 4466 4962 119 1200 19 L2C5-40HG1211E1900 5000K 90 4638 5153 123 1200 19 L2C5-50HG1211E1900 2700K 90 4994 5549 101 1600 23 L2C5-27HG1216E2300 3000K 90 5273 5859 106 1600 23 L2C5-30HG1216E2300 3250K 90 5492 6102 111 1600 23 L2C5-33HG1216E2300 3500K 90 5589 6210 113 1600 23 L2C5-35HG1216E2300 4000K 90 5864 6515 118 1600 23 L2C5-40HG1216E2300 5000K 90 6089 6766 123 1600 23 L2C5-50HG1216E2300 Notes (continued): 1. Lumileds maintains a tolerance of ±2 on CRI and ±6.5% on luminous flux measurements. 2. Typical CRI is approximately 2 points higher than the minimum CRI specified, but this is not guaranteed. 3. R9 value of 90CRI products is >50. Mechanical Dimensions. L2C2-xxxx1204E1300 R1.6 2x 16±0.2 3.5 L2C2-xxxx1205E1 L2C2-xxxx1203E0900 L2C2-xxxx1202E0900 R1.6 2x R1.6 2x 16±0.2 3.5 3.5 3.5 4.5 R1.6 2x 3.5 +0.5 9 - 0.1 CL CL 24±0.2 xxxx 1203 1±0.1 6 8 0.1 2 CL 3.5 CL 2 2 xxxx 1204 1±0.1 3.5 3.5 LINEAR: ANGULAR: XX. ±0.2 mm XX ±1° XX.X ±0.1 mm XX.X ±0°30' XX.XX ±0.05 mm XX.XX ±0°00'30" 6 0.5±0.2 L2C5-xxHG1202E0600 DRAW N BY DATE T. VU / R. HELBING 2013-01-24 ENGINEER/CHECKER DATE YYYY-MM-DD L2C5-xxHG1202E0900 UNLESS OTHERW ISE SPECIFIED TITLE ° DIMENSIONS ARE IN MILLIMETERS DO NOT SCALE THIS GD&T SYMBOLOGY PER METRIC 1 ° THIRD ANGLE PROJECTION ASME Y14.5M-1994 DRAW ING OF TOLERANCES (UNLESS OTHERWISE SPECIFIED) 1 2013-01-24 DRAW N BY DATE T. VU / R. HELBING 2013-01-24 ENGINEER/CHECKER DATE YYYY-MM-DD 16x19 LES9 COB DATASHEET DRAWING L2C5-xxHG1203E0900 B 5:1 DO NOT SCALE THIS DRAW ING UNLESS OTHERW ISE SPECIFIED TITLE ° DIMENSIONS ARE IN MILLIMETERS METRIC SIZE SCALE T. VU LINEAR: ANGULAR: XX. ±0.2 mm XX ±1° XX.X ±0.1 mm XX.X ±0°30' XX.XX ±0.05 mm XX.XX ±0°00'30" FRAME DATE: 2011-04-18 SHEET GD&T SYMBOLOGY PER 1 ° THIRD ANGLE PROJECTION ASME Y14.5M-1994 5:1 SCALE TOLERANCES (UNLESS OTHERWISE SPECIFIED) LINEAR: ANGULAR: XX. ±0.2 mm XX ±1° XX.X ±0.1 mm XX.X ±0°30' XX.XX ±0.05 mm XX.XX ±0°00'30" B SIZE METRIC DRAW ING 4.5 L2C2-xxxx1205E1300 R1.6 2x 3.5 4.5 L2C2-xxxx1208E1500 4.5 R1.6 2x 3.5 DATE YYYY-MM-DD GD&T SYMBOLOGY PER TITLE CL CL 1 OF B 5:1 SHEET SCALE SIZE 9.4 3.2 11.4 12 3.2 2 0.1 17.5±0.3 CL 24±0.2 FRAME DATE: 2011-04-18 1 ° THIRD ANGLE PROJECTION ASME Y14.5M-1994 11.4 8 6.4 9.4 2 CL 20x24 LES13 UNLESS OTHERW ISE SPECIFIED 2 +0.5 15 - 0.1 8 DATE 2013-01-24 ENGINEER/CHECKER xxxx 1216 +0.5 13 - 0.1 8 2013-01-24 DRAW N BY T. VU / R. HELBING CL 24±0.2 CL CL CL 28±0.2 CL CL 12 8 8.5 8 8.5 xxxx 1205 2 1±0.1 20±0.2 3.5 xxxx 1208 2 CL 7.5 7.5 4.5 20±0.2 0.5±0.2 4.5 7.5 2013-01-24 DRAW N BY DATE T. VU / R. HELBING 2013-01-24 ENGINEER/CHECKER DATE UNLESS OTHERW ISE SPECIFIED ° DIMENSIONS ARE IN MILLIMETERS ° THIRD ANGLE PROJECTION YYYY-MM-DD 20x24 LES13 COB DATASHEET DRAWING L2C5-xxHG1205E1300 TITLE 1 FRAME DATE: 2011-04-18 OF SHEET 1 5:1 SCALE B SIZE TOLERANCES (UNLESS OTHERWISE SPECIFIED) 0.5±0.2 T. VU 2013-01-24 DRAW N BY DATE T. VU / R. HELBING 2013-01-24 ENGINEER/CHECKER DATE YYYY-MM-DD 20x24 LES15 COB DATASHEET DRAWING L2C5-xxHG1208E1500 LINEAR: ANGULAR: XX. ±0.2 mm XX ±1° XX.X ±0.1 mm XX.X ±0°30' XX.XX ±0.05 mm XX.XX ±0°00'30" DO NOT SCALE THIS METRIC DRAW ING UNLESS OTHERW ISE SPECIFIED ° DIMENSIONS ARE IN MILLIMETERS GD&T SYMBOLOGY PER ° THIRD ANGLE PROJECTION ASME Y14.5M-1994 9.4 11.4 0.5±0.2 1±0.1 25±0.3 1±0.1 20±0.2 0.5±0.2 +0.5 23 - 0.1 3.2 2 CL 3.5 1±0.1 28±0.2 TOLERANCES T. VU 11.4 2 2 xxxx 1204 CL 4.5 9.4 8.5 TITLE 1 OF SHEET 1 FRAME DATE: 2011-04-18 5:1 SCALE B SIZE MMW 1/20/14 DRAWN BY RENE/THUY DATE YYYY-MM-DD 1/20/14 28X28 LES19 COB DATA SHEET DRAWING L2C5-xxHG1211E1900 ENGINEER/CHECKER DATE UNLESS OTHERWISE SPECIFIED ° DIMENSIONS ARE IN MILLIMETERS DO NOT SCALE THIS METRIC DRAWING GD&T SYMBOLOGY PER ASME Y14.5M-1994 TITLE ° THIRD ANGLE PROJECTION - MATERIAL - FINISH 1 FRAME DATE: 2013-05-10 OF SHEET 1 4:1 SCALE B SIZE TOLERANCES (UNLESS OTHERWISE SPECIFIED) MMW DRAW N BY 7/8/14 YYYY-MM-DD DATE 28X28 LES23 COB DATA SHEET DRAWING L2C5-xxHG1216E2300 LINEAR: ANGULAR: XX. 0.2mm XX 1 XX.X 0.1mm XX.X 0 30' XX.XX 0.05mm XX.XX 0 00'30" TOLERANCE TYPE DO NOT SCALE THIS GD&T SYMBOLOGY PER METRIC DRAW ING ASME Y14.5M-1994 RENE/THUY ENGINEER/CHECKER 7/8/14 DATE UNLESS OTHERW ISE SPECIFIED ° DIMENSIONS ARE IN MILLIMETERS ° THIRD ANGLE PROJECTION ° ADHERENCE TO DW G A-5951-1561-1 (COMPANY STD. SECTION 608) AND A-5951-1745-1 (GSE) IS REQUIRED YYYY-MM-DD TITLE 1 FRAM E DATE: 2007-06-29 OF SHEET 1 N/A SHEET SCALE B SIZE Notes: 1. Drawings are not scale. 2. All dimensions are in millimeters. ©2016 Lumileds Holding B.V. All rights reserved. LUXEON is a registered trademark of the Lumileds Holding B.V. in the United States and other countries. lumileds.com PB165 LUXEON CoB with CrispColor Technology Product Brief 20161102 4.5 20±0.2 CL 2x xxxx 1211 0.1 2 T. VU ° DIMENSIONS ARE IN MILLIMETERS CL 0.1 15.5±0.3 3.5 0.5±0.2 L2C2-xxxx1211E1900 2X 3.5 0.1 2 CL 1±0.1 7.5 COB DATASHEET L2C5-xxHG1204E1300 DRAWING FRAME DATE: 2011-04-18 1 OF SHEET DO NOT SCALE THIS C2-xxxx1204E1300 xx 2 CL 4.5 20±0.2 16x19 LES9 COB DATASHEET DRAWING 2013-01-24 8 2 CL 0.5±0.2 T. VU 24±0.2 8.5 3.5 TOLERANCES (UNLESS OTHERWISE SPECIFIED) CL 6 6.5 2 xxxx 1202 3.5 CL CL 0.1 2 +0.5 13 - 0.1 8 6.5 19±0.2 6 6.5 +0.5 13 - 0.1 11.3±0.3 6.5 15.5±0.3 2 2 2 +0.5 9 - 0.1 11.3±0.3 19±0.2 4.5 0.1 15.5±0.3 Lumileds Holding B.V. shall not be liable for any kind of loss of data or any other damages, direct, indirect or consequential, resulting from the use of the provided information and data. Although Lumileds Holding B.V. has attempted to provide the most accurate information and data, the materials and services information and data are provided “as is” and Lumileds Holding B.V. neither warranties, nor guarantees the contents and correctness of the provided information and data. Lumileds Holding B.V. reserves the right to make changes without notice. You as user agree to this disclaimer and user agreement with the download or use of the provided materials, information and data.