Discontinuation Notice AZ961 Discontinuation date: Date of last order: Recommended replacement: on tin ue d ! MINIATURE POWER RELAY 31.12.2012 15.11.2012 - FEATURES • • • • • • 1 Form A or 1 Form C Standard and sensitive coils All plastics rated 94V-0 Epoxy sealed version available Class B insulation system UL, CUR file E43203 CONTACTS GENERAL DATA Arrangement SPST NO (1 Form A) SPDT (1 Form C) Ratings Resistive load: 1 Form A Max. switched power: 150 W or 1250 VA Max. switched current: 5 A Max. switched voltage: 150 VDC* or 300 VAC * Note: If switching voltage is greater than 30 VDC, special precautions must be taken. Please contact the factory. 1 Form C Max. switched power: 150 W or 1250 VA (N.O.) 750 VA (N.C.) Max. switched current: 5 A (N.O.), 3 A (N.C.) Max. switched voltage: 150 VDC* or 300 VAC UL, CUR 1 Form A: 5 A at 250 VAC, General Use 3 A at 30 VDC 1 Form C: 5 A / 3 A at 250 VAC, General Use 5 A / 3 A at 30 VDC (N.O. / N.C.) Operate Time (typical) 10 ms at nominal coil voltage Release Time (typical) 5 ms at nominal coil voltage (with no coil suppression) Dielectric Strength 2000 Vrms coil to contact (at sea level for 1 min.) 1000 Vrms between open contacts 4000 V surge (2 x 10 us) coil to contact Insulation Resistance 1000 megohms min. at 500 VDC, 20°C, 50% RH Dropout Greater than 5% of nominal coil voltage Ambient Temperature Operating Standard: 40°C (-40°F) to 75°C (167°F) Sensitive: 40°C (-40°F) to 85°C (186°F) Storage 40°C (-40°F) to 105°C (221°F) Vibration 0.062" (1.5 mm) DA at 10–55 Hz Shock 10 g Silver cadmium oxide Enclosure P.B.T. polyester Terminals Tinned copper alloy, P.C. Max. Solder Temp. 250°C (482°F) Max. Solder Time 5 seconds Max. Solvent Temp. 80°C (176°F) Max. Immersion Time 30 seconds Weight 8 grams sc COIL Minimum operations 1 x 107 1 x 105 at 5 A 240 VAC Res. N.O. precautions must be taken. Please contact the factory. *Note: If switching voltage is greater than 30 VDC, special Material Life Expectancy Mechanical Electrical Power At Pickup Voltage (typical) Standard coil: 176 mW Sensitive coil: 129 mW Max Continuous Dissipation 1.5 W at 20°C (68°F) Temperature Rise At nominal coil voltage: Standard coil: 27°C (49°F) Sensitive coil: 20°C (36°F) 130°C (266°F) Di Max. Temperature NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Specifications subject to change without notice. ZETTLER electronics GmbH Junkersstrasse 3, D-82178 Puchheim, Germany Tel. +49 89 800 97 0 Fax +49 89 800 97 200 [email protected] www.ZETTLERelectronics.com 2003-06-23 Discontinuation Notice Discontinuation date: Date of last order: Recommended replacement: AZ961 ! RELAY ORDERING DATA STANDARD COIL 5 6 9 12 18 24 48 SENSITIVE COIL ORDER NUMBER* on tin ue d COIL SPECIFICATIONS Nominal Coil VDC 3 Max. Continuous VDC 6.1 Coil Resistance Ohm ±10% 25 Must Operate VDC 2.1 1 Form A 1 Form C AZ961–1A–3D AZ961–1C–3D 10.2 69 3.5 AZ961–1A–5D AZ961–1C–5D 12.2 100 4.2 AZ961–1A–6D AZ961–1C–6D 18.4 225 6.3 AZ961–1A–9D AZ961–1C–9D 24.5 400 8.4 AZ961–1A–12D AZ961–1C–12D 36.7 900 12.6 AZ961–1A–18D AZ961–1C–18D 48.9 1,600 16.8 AZ961–1A–24D AZ961–1C–24D 97.9 6,400 33.6 AZ961–1A–48D AZ961–1C–48D COIL SPECIFICATIONS Nominal Coil VDC 3 5 6 9 12 18 24 48 31.12.2012 15.11.2012 - ORDER NUMBER* Max. Continuous VDC 7.3 Coil Resistance Ohm ±10% 36 Must Operate VDC 2.1 AZ961–1A–3DS AZ961–1C–3DS 12.2 100 3.5 AZ961–1A–5DS AZ961–1C–5DS 14.7 145 4.2 AZ961–1A–6DS AZ961–1C–6DS 22.0 325 6.3 AZ961–1A–9DS AZ961–1C–9DS 29.3 575 8.4 AZ961–1A–12DS AZ961–1C–12DS 44.2 1,300 12.6 AZ961–1A–18DS AZ961–1C–18DS 58.9 2,310 16.8 AZ961–1A–24DS AZ961–1C–24DS 117.0 9,220 33.6 AZ961–1A–48DS AZ961–1C–48DS 1 Form A 1 Form C *For epoxy sealed version, add suffix “E”. MECHANICAL DATA .807 [20.5] .413 [10.5] 3 x ø.047± .003 [ø1.19± .076] .807 [20.5] .057 [1.44] .200 [5.08] .300 [7.62] sc .054 [1.37] .100 [2.54] 2 x ø.039± .003 [ø1.0± .076] .500 [12.7] .100 [2.54] 4 x .020 [0.5] 5 x .134 [3.4] 2 x .016 [0.4] VIEWEDTOWARDTERMINALS 2 x .024 SQ [0.6 SQ] Di 2 x .024 [0.6] .010 [0.25] 1 4 2 5 4 5 3 .032 [0.8] 1 FORMC Dimensions in inches with metric equivalents in parentheses. Tolerance: ±0.010" ZETTLER 2 3 1 FORMA VIEWEDTOWARDTERMINALS electronics GmbH Junkersstrasse 3, D-82178 Puchheim, Germany Tel. +49 89 800 97 0 Fax +49 89 800 97 200 [email protected] www.ZETTLERelectronics.com 2003-06-23