LED CONVERTER UNIT CE-1077 (PRELIMINARY INFORMATION) DESCRIPTION : This low profile LED-Converter is developed for 3 LED-lines APPLICABLE: 3 LED lines (Serial Mode) Pout max. 2,8 Watt per line, total max. 8,4 Watt LED Voltage max. 28V Lamp Current max. 100 mAdc per line FEATURES : PWM Dimming Remote ON / OFF Alarm output function Shutdown function RoHS compliant (R) TEMPERATURE & HUMIDITY : Operating Temperature Range Storage Temperature Range Humidity DIMENSIONS : LxWxH -20°C ~ +80°C -20°C ~ +85°C 95 %RH max 120 x 21.5 x 7.2 mm Weight :T.B.D. Components No. 1 2 3 4 Part Description PCB Connector CN1 Connector CN2 Connector CN3 Qty. 1 1 1 1 Material UL94V-0 (FR-4 or CEM-3) 51021-0700 PHR-5 SHR-60V-S-B Note t=1.0m m Molex JST JST Power Systems – The Power Solution Web: Email: www.Power-Systems.de [email protected] All specifications are subject to change without notice. Address: Hauptstr. 48 ; 74360 Ilsfeld-Auenstein / Germany Tel. : + 49 / 70 62 / 67 59 - 6 Fax: + 49 / 70 62 / 67 59 - 800 Page (1) Version 1.0.2, 28th April 2008 LED CONVERTER UNIT CE-1077 (PRELIMINARY INFORMATION) Input side CN1: Pin No. Symbols Ratings Vin 10.8 ~ 13.2 Vdc CN 1-1 Vin 10.8 ~ 13.2 Vdc CN 1-2 GND CN 1-3 GND CN 1-4 Vrmt 0 ~ 0.4 = OFF / 2.5 ~ Vin = ON CN 1-5 Vst 0V (normal) / T.B.D. (fail) CN 1-6 0 ~ 2.5Vdc / 0 ~ 50kΩ Vbr/Rbr CN 1-7 (max brightness 0V / 0Ω) Output side CN3: Pin No. Symbols +CH3 CN 3-1 +CH2 CN 3-2 +CH1 CN 3-3 -CH1 CN 3-4 -CH2 CN 3-5 -CH3 CN 3-6 Output side CN2: Pin No. Symbols Vin CN 2-1 GND CN 2-2 Ext. PWM CN 2-3 N.C. CN 2-4 Ratings 10.8 ~ 13.2 Vdc 0 - 5 V (0V active) - Vrmt CN 2-5 0~0.4V=OFF / 2.5~5V=ON Caution: Ratings Never connect CN1 and CN2 at the same time. If = 100mArms (max)/ch V = 28V (max)/ch ELECTRICAL CHARACTERISTICS : In case of CN1 connection Conditions Parameters Symbols Output Current Dimming 1 Input Current 1 Input Current 2 Oscillation Frequency Burst Frequency Iout Ipwm Iin1 Iin2 f fbs t Vs t1 Vs t2 W arning Output Vin (V) 10.8 10.8 10.8 10.8 10.8 10.8 10.8 10.8 ~ 13.2 ~ 13.2 ~ 13.2 ~ 13.2 ~ 13.2 ~ 13.2 ~ 13.2 ~ 13.2 Specification Unit Vbr (V) Tu (°C) Min. Typ. Max. 0 2.5 0 0 0 2.5 0 0 T.B.D. T.B.D. T.B.D. T.B.D. T.B.D. T.B.D. T.B.D. T.B.D. 95 3.5 700 300 T.B.D. 100 5.0 0.6 T.B.D. 750 330 0 T.B.D. 105 m Arm s 6.0 m Arm s 0.7 A T.B.D. mA 800 KHz 360 Hz 0.5 Vdc T.B.D. Vdc Note In case of CN2 connection Conditions Parameters Output Current Dimming 1 Input Current 1 Input Current 2 Symbols Specification Unit Vin (V) ext.PWM Tu (°C) Min. Typ. Max. Iout 10.8 ~ 13.2 0 T.B.D. 95 100 105 mArms Ipwm 10.8 ~ 13.2 99% T.B.D. 0.5 1.0 1.5 mArms Iin1 Iin2 10.8 ~ 13.2 10.8 ~ 13.2 0 0 T.B.D. T.B.D. - 0.6 T.B.D. 0.7 T.B.D. A mA Note PWM : 5V / 200 Hz Power Systems – The Power Solution Web: Email: www.Power-Systems.de [email protected] All specifications are subject to change without notice. Address: Hauptstr. 48 ; 74360 Ilsfeld-Auenstein / Germany Tel. : + 49 / 70 62 / 67 59 - 6 Fax: + 49 / 70 62 / 67 59 - 800 Page (2) Version 1.0.2, 28th April 2008 LED CONVERTER UNIT CE-1077 (PRELIMINARY INFORMATION) TEST CIRCUIT : Connect Vbr to Ground while using ext. PWM dimming. Power Systems – The Power Solution Web: Email: www.Power-Systems.de [email protected] All specifications are subject to change without notice. Address: Hauptstr. 48 ; 74360 Ilsfeld-Auenstein / Germany Tel. : + 49 / 70 62 / 67 59 - 6 Fax: + 49 / 70 62 / 67 59 - 800 Page (3) Version 1.0.2, 28th April 2008