Philips Semiconductors Product specification TrenchMOS transistor Logic level FET BUK9528-100A BUK9628-100A GENERAL DESCRIPTION N-channel enhancement mode logic level field-effect power transistor in a plastic envelope available in TO220AB and SOT404 . Using ’trench’ technology which features very low on-state resistance. It is intended for use in automotive and general purpose switching applications. QUICK REFERENCE DATA SYMBOL PARAMETER VDS ID Ptot Tj RDS(ON) Drain-source voltage Drain current (DC) Total power dissipation Junction temperature Drain-source on-state resistance VGS = 5 V VGS = 10 V MAX. UNIT 100 49 166 175 V A W ˚C 28 27 mΩ mΩ PINNING TO220AB & SOT404 PIN PIN CONFIGURATION DESCRIPTION 1 gate 2 drain 3 source SYMBOL d tab mb g 2 1 tab/mb drain 3 1 2 3 TO220AB SOT404 s LIMITING VALUES Limiting values in accordance with the Absolute Maximum System (IEC 134) SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT VDS VDGR ±VGS ±VGSM Drain-source voltage Drain-gate voltage Gate-source voltage Non-repetitive gate-source voltage RGS = 20 kΩ tp≤50µS - 100 100 10 15 V V V V ID ID IDM Ptot Tstg, Tj Drain current (DC) Drain current (DC) Drain current (pulse peak value) Total power dissipation Storage & operating temperature Tmb = 25 ˚C Tmb = 100 ˚C Tmb = 25 ˚C Tmb = 25 ˚C - - 55 49 34 195 166 175 A A A W ˚C TYP. MAX. UNIT - 0.9 K/W in free air 60 - K/W Minimum footprint, FR4 board 50 - K/W THERMAL RESISTANCES SYMBOL PARAMETER CONDITIONS Rth j-mb Thermal resistance junction to mounting base Thermal resistance junction to ambient(TO220AB) Thermal resistance junction to ambient(SOT404) - Rth j-a Rth j-a March 2000 1 Rev 1.000 Philips Semiconductors Product specification TrenchMOS transistor Logic level FET BUK9528-100A BUK9628-100A STATIC CHARACTERISTICS Tj= 25˚C unless otherwise specified SYMBOL PARAMETER CONDITIONS V(BR)DSS Drain-source breakdown voltage Gate threshold voltage VGS = 0 V; ID = 0.25 mA; VGS(TO) MIN. TYP. MAX. UNIT VGS = 10 V; ID = 25 A VGS = 4.5 V; ID = 25 A 100 89 1 0.5 - 1.5 0.05 2 18.5 17 18.8 2.0 2.3 10 500 100 28 70 27 31 V V V V V µA µA nA mΩ mΩ mΩ mΩ MIN. TYP. MAX. UNIT Tj = -55˚C VDS = VGS; ID = 1 mA Tj = 175˚C Tj = -55˚C IDSS Zero gate voltage drain current VDS = 100 V; VGS = 0 V; IGSS RDS(ON) Gate source leakage current Drain-source on-state resistance VGS = ±10 V; VDS = 0 V VGS = 5 V; ID = 25 A Tj = 175˚C Tj = 175˚C DYNAMIC CHARACTERISTICS Tmb = 25˚C unless otherwise specified SYMBOL PARAMETER CONDITIONS Ciss Coss Crss Input capacitance Output capacitance Feedback capacitance VGS = 0 V; VDS = 25 V; f = 1 MHz - 3220 315 187 4293 378 256 pF pF pF td on tr td off tf Turn-on delay time Turn-on rise time Turn-off delay time Turn-off fall time VDD = 30 V; Rload =1.2Ω; VGS = 5 V; RG = 10 Ω - 11 58 250 106 16 87 350 148 ns ns ns ns Ld Internal drain inductance - 4.5 - nH Ld Internal drain inductance - 3.5 - nH Ld Internal drain inductance - 2.5 - nH Ls Internal source inductance Measured from drain lead 6 mm from package to centre of die Measured from contact screw on tab to centre of die(TO220AB) Measured from upper edge of drain tab to centre of die(SOT404) Measured from source lead to source bond pad - 7.5 - nH MIN. TYP. MAX. UNIT - - 49 A IF = 25 A; VGS = 0 V IF = 49 A; VGS = 0 V - 0.85 1.1 195 1.2 - A V V IF = 49 A; -dIF/dt = 100 A/µs; VGS = -10 V; VR = 30 V - 63 0.22 - ns µC REVERSE DIODE LIMITING VALUES AND CHARACTERISTICS Tj = 25˚C unless otherwise specified SYMBOL PARAMETER IDR IDRM VSD Continuous reverse drain current Pulsed reverse drain current Diode forward voltage trr Qrr Reverse recovery time Reverse recovery charge March 2000 CONDITIONS 2 Rev 1.000 Philips Semiconductors Product specification TrenchMOS transistor Logic level FET BUK9528-100A BUK9628-100A AVALANCHE LIMITING VALUE SYMBOL 1 DSS W 120 PARAMETER CONDITIONS Drain-source non-repetitive unclamped inductive turn-off energy ID = 30 A; VDD ≤ 25 V; VGS = 5 V; RGS = 50 Ω; Tmb = 25 ˚C Normalised Power Derating PD% MIN. TYP. MAX. UNIT - - 45 mJ 1000 110 ID/A 100 RDS(ON)=VDS/ID 90 tp = 1us 100 80 70 10us 60 100us 50 40 10 1ms 30 DC 20 10ms 10 100ms 0 0 20 40 60 80 100 Tmb / C 120 140 160 180 1 Fig.1. Normalised power dissipation. PD% = 100⋅PD/PD 25 ˚C = f(Tmb) 120 10 VSD/V 100 1000 Fig.3. Safe operating area. Tmb = 25 ˚C ID & IDM = f(VDS); IDM single pulse; parameter tp Normalised Current Derating ID% 1 Zth/(K/W) 1 110 0.5 100 90 0.2 0.1 80 70 0.1 0.05 60 0.02 50 0.01 40 0 30 20 0.001 1E-07 10 0 0 20 40 60 80 100 Tmb / C 120 140 160 180 1E-05 1E-03 1E-01 1E+01 t/s Fig.2. Normalised continuous drain current. ID% = 100⋅ID/ID 25 ˚C = f(Tmb); conditions: VGS ≥ 5 V Fig.4. Transient thermal impedance. Zth j-mb = f(t); parameter D = tp/T 1 For maximum permissible repetive avalanche current see fig.18. March 2000 3 Rev 1.000 Philips Semiconductors Product specification TrenchMOS transistor Logic level FET BUK9528-100A BUK9628-100A VGS/V = 60 ID/A 10.0 4.0 5.0 25 3.8 3.6 50 ID/A 20 3.4 40 15 3.2 Tj/C= 175 3.0 30 25 10 2.8 20 5 2.6 2.4 10 0 2.2 0.0 0 0 2 4 6 8 2.0 4.0 6.0 VGS/V 10 VDS/V RDS(ON)/mOhm Fig.5. Typical output characteristics, Tj = 25 ˚C. ID = f(VDS); parameter VGS 65 Fig.8. Typical transfer characteristics. ID = f(VGS) ; conditions: VDS = 25 V; parameter Tj 100 3.0 gfs/S90 60 80 55 70 50 3.2 45 60 50 3.4 3.6 3.8 4.0 5.0 40 35 40 30 20 30 10 25 0 5 15 25 35 45 55 0 ID/A Fig.6. Typical on-state resistance, Tj = 25 ˚C. RDS(ON) = f(ID); paramter VGS 23 20 40 ID/A 60 80 100 Fig.9. Typical transconductance, Tj = 25 ˚C. gfs = f(ID); conditions: VDS = 25 V RDS(ON) Ohm 3 Rds(on) normalised to 25degC a 22 2.5 21 20 2 19 1.5 18 17 1 16 15 3 4 5 6 7 8 9 0.5 10 VGS/V Fig.7. Typical on-state resistance, Tj = 25 ˚C. RDS(ON) = f(VGS); conditions: ID = 25 A; March 2000 -100 -50 0 50 100 Tmb / degC 150 200 Fig.10. Normalised drain-source on-state resistance. a = RDS(ON)/RDS(ON)25 ˚C = f(Tj); ID = 25 A; VGS = 5 V 4 Rev 1.000 Philips Semiconductors Product specification TrenchMOS transistor Logic level FET 2.5 BUK9528-100A BUK9628-100A VGS(TO) / V 5 VGS / V max. 4 2 VDS = 14V VDS = 44V typ. 3 1.5 min. 2 1 1 0.5 0 0 -100 -50 0 50 Tj / C 100 150 0 200 Fig.11. Gate threshold voltage. VGS(TO) = f(Tj); conditions: ID = 1 mA; VDS = VGS 20 30 QG / nC 40 50 60 Fig.14. Typical turn-on gate-charge characteristics. VGS = f(QG); conditions: ID = 25 A; parameter VDS Sub-Threshold Conduction 1E-01 10 100 IF/A 90 80 1E-02 70 2% 1E-03 typ 60 98% o Tj/C= 175 C 50 o 25 C 40 1E-04 30 20 1E-05 10 0 1E-05 0.0 0 0.5 1 1.5 2 2.5 0.2 0.4 0.6 0.8 VSDS/V 3 Fig.12. Sub-threshold drain current. ID = f(VGS); conditions: Tj = 25 ˚C; VDS = VGS 1.0 1.2 1.4 Fig.15. Typical reverse diode current. IF = f(VSDS); conditions: VGS = 0 V; parameter Tj 120 WDSS% 110 8.0 100 7.0 Capacitance / pF 90 6.0 80 5.0 70 60 4.0 Ciss 3.0 50 40 2.0 30 1.0 0.0 0.01 20 Coss Crss 0.1 1 VDS/V 10 10 100 0 20 Fig.13. Typical capacitances, Ciss, Coss, Crss. C = f(VDS); conditions: VGS = 0 V; f = 1 MHz March 2000 40 60 80 100 120 Tmb / C 140 160 180 Fig.16. Normalised avalanche energy rating. WDSS% = f(Tmb); conditions: ID = 75 A 5 Rev 1.000 Philips Semiconductors Product specification TrenchMOS transistor Logic level FET BUK9528-100A BUK9628-100A + VDD + VDD RD L VDS VDS - VGS - VGS -ID/100 T.U.T. 0 0 RG T.U.T. R 01 shunt RGS Fig.17. Avalanche energy test circuit. WDSS = 0.5 ⋅ LID2 ⋅ BVDSS /(BVDSS − VDD ) Fig.19. Switching test circuit. 100 25ºC IAV 10 Tj prior to avanche 150ºC 1 0.001 0.01 0.1 1 10 Avalanche Time, tAV (ms) Fig.18. Maximum permissible repetitive avalanche current(IAV) versus avalanche time(tAV) for unclamped inductive loads. March 2000 6 Rev 1.000 Philips Semiconductors Product specification TrenchMOS transistor Logic level FET BUK9528-100A BUK9628-100A MECHANICAL DATA Dimensions in mm 4,5 max Net Mass: 2 g 10,3 max 1,3 3,7 2,8 5,9 min 15,8 max 3,0 max not tinned 3,0 13,5 min 1,3 max 1 2 3 (2x) 0,9 max (3x) 2,54 2,54 0,6 2,4 Fig.20. SOT78 (TO220AB); pin 2 connected to mounting base. Notes 1. Observe the general handling precautions for electrostatic-discharge sensitive devices (ESDs) to prevent damage to MOS gate oxide. 2. Refer to mounting instructions for SOT78 (TO220) envelopes. 3. Epoxy meets UL94 V0 at 1/8". March 2000 7 Rev 1.000 Philips Semiconductors Product specification TrenchMOS transistor Logic level FET BUK9528-100A BUK9628-100A MECHANICAL DATA Plastic single-ended surface mounted package (Philips version of D2-PAK); 3 leads (one lead cropped) SOT404 A A1 E mounting base D1 D HD 2 Lp 1 3 c b e e Q 0 2.5 5 mm scale DIMENSIONS (mm are the original dimensions) UNIT A A1 b c mm 4.50 4.10 1.40 1.27 0.85 0.60 0.64 0.46 OUTLINE VERSION D max. D1 E 11 1.60 1.20 10.30 9.70 e Lp HD Q 2.54 2.90 2.10 15.40 14.80 2.60 2.20 REFERENCES IEC JEDEC EIAJ EUROPEAN PROJECTION ISSUE DATE 98-12-14 99-06-25 SOT404 Fig.21. SOT404 surface mounting package. Centre pin connected to mounting base. Notes 1. This product is supplied in anti-static packaging. The gate-source input must be protected against static discharge during transport or handling. 2. Refer to SMD Footprint Design and Soldering Guidelines, Data Handbook SC18. 3. Epoxy meets UL94 V0 at 1/8". March 2000 8 Rev 1.000 Philips Semiconductors Product specification TrenchMOS transistor Logic level FET BUK9528-100A BUK9628-100A MOUNTING INSTRUCTIONS Dimensions in mm 11.5 9.0 17.5 2.0 3.8 5.08 Fig.22. SOT404 : soldering pattern for surface mounting. DEFINITIONS Data sheet status Objective specification This data sheet contains target or goal specifications for product development. Preliminary specification This data sheet contains preliminary data; supplementary data may be published later. Product specification This data sheet contains final product specifications. Limiting values Limiting values are given in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of this specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information Where application information is given, it is advisory and does not form part of the specification. Philips Electronics N.V. 2000 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, it is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent or other industrial or intellectual property rights. LIFE SUPPORT APPLICATIONS These products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Philips customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting from such improper use or sale. March 2000 9 Rev 1.000