Online data sheet IMB30-15BPPVC0K IMB INDUCTIVE PROXIMITY SENSORS IMB30-15BPPVC0K | IMB INDUCTIVE PROXIMITY SENSORS Ordering information A B C D E F H I J K L M N O P Q R S T Type Part no. IMB30-15BPPVC0K 1074406 Other models and accessories www.sick.com/IMB Illustration may differ Detailed technical data Features Housing Cylindrical thread design Housing Short-body Thread size M30 1.5 Diameter Ø 30 mm Sensing range Sn 15 mm Safe sensing range Sa 12.15 mm Installation type Flush Switching frequency 500 Hz Connection type Male connector M12, 4-pin 1) Switching output PNP Output function Complementary Electrical wiring DC 4-wire Enclosure rating IP68 2) IP69K 3) Special features 1) 2) 3) Resistant against coolant lubricantsCapable of communication via IO-Link 1.0 With gold plated contact pins. According to EN 60529. According to ISO 20653:2013-03. Communication interface Communication interface IO-Link V1.0 Mode COM2 (38,4 kBaud) Process data length 1 Byte Process data structure Bit 0 = Sr reached 2 PROXIMITY SENSORS | SICK Online data sheet | 2018-05-04 11:42:19 Subject to change without notice IMB30-15BPPVC0K | IMB INDUCTIVE PROXIMITY SENSORS Bit 1 = Sa reached Mechanics/electronics Supply voltage 10 V DC ... 30 V DC Ripple ≤ 10 % Voltage drop ≤ 2 V 1) Current consumption ≤ 10 mA 2) Hysteresis 3 % ... 20 % Reproducibility ≤ 2 % 3) 4) Temperature drift (of Sr) ± 10 % EMC According to EN 60947-5-2 Continuous current Ia ≤ 200 mA Short-circuit protection ✔ Reverse polarity protection ✔ Power-up pulse protection ✔ Power-up pulse ≤ 5 ms Shock and vibration resistance 100 g / 2 ms / 500 cycles; 150 g / 1 Mio cycles; 10 Hz ... 55 Hz / 1 mm; 55 Hz ... 500 Hz / 60 g Ambient operating temperature –40 °C ... +100 °C Housing material Stainless steel, V2A (1.4305) Sensing face material Plastic, LCP Housing length 40 mm Thread length 35 mm Tightening torque, max. Typ. 100 Nm 5) Protection class II 6) UL File No. E181493 1) 2) 3) 4) 5) 6) At Ia max. Without load. Ub and Ta constant. Of Sr. Valid if toothed side of nut is used. Reference voltage DC 50 V. Reduction factors Note The values are reference values which may vary Stainless steel (V2A, 304) Approx. 0.62 Aluminum (Al) Approx. 0.26 Copper (Cu) Approx. 0.17 Brass (Br) Approx. 0.27 Installation note Remark Associated graphic see "Installation" B 40 mm C 30 mm D 45 mm 2018-05-04 11:42:19 | Online data sheet Subject to change without notice PROXIMITY SENSORS | SICK 3 IMB30-15BPPVC0K | IMB INDUCTIVE PROXIMITY SENSORS A B C D E F H I J K L M N O P Q R S T F 120 mm Classifications ECl@ss 5.0 27270101 ECl@ss 5.1.4 27270101 ECl@ss 6.0 27270101 ECl@ss 6.2 27270101 ECl@ss 7.0 27270101 ECl@ss 8.0 27270101 ECl@ss 8.1 27270101 ECl@ss 9.0 27270101 ETIM 5.0 EC002714 ETIM 6.0 EC002714 UNSPSC 16.0901 39122230 Installation note Flush installation F B C D Connection diagram cd-006 BN 1 BK 4 WH 2 BU 4 3 + (L+) NO NC - (M) PROXIMITY SENSORS | SICK Online data sheet | 2018-05-04 11:42:19 Subject to change without notice IMB30-15BPPVC0K | IMB INDUCTIVE PROXIMITY SENSORS Characteristic curve Flush installation Distance in mm (inch) 20 (0.79) 10 (0.39) 0 10 (0.39) 20 (0.79) 0 2 4 6 8 10 12 14 (0.08) (0.16) (0.24) (0.31) (0.39) (0.47) (0.55) Sn in mm (inch) Dimensional drawing (Dimensions in mm (inch)) IMB30 Short-body housing, connector M12, flush 50.2 (1.98) 8.9 (0.35) M30x1 32.2 (1.27) Recommended accessories Other models and accessories www.sick.com/IMB Brief description Type Part no. BEF-KHS-N11N 2071081 BEF-WG-M30 5321871 Universal bar clamp systems Plate N11N for universal clamp bracket, Stainless steel 1.4571 (sheet), Stainless steel 1.4408 (clamp), Universal clamp (5322626), mounting hardware Mounting brackets and plates Mounting plate for M30 sensors, steel, zinc coated, without mounting hardware 2018-05-04 11:42:19 | Online data sheet Subject to change without notice PROXIMITY SENSORS | SICK 5 IMB30-15BPPVC0K | IMB INDUCTIVE PROXIMITY SENSORS A B C D E F H I J K L M N O P Q R S T Brief description Type Part no. BEF-WN-M30 5308445 Head A: female connector, M12, 4-pin, straight Head B: Flying leads Cable: PP, unshielded, 2 m This product is generally resistant to chemical cleaning agents (see ECOLAB) and other chemical compounds such as H2O2 and CH2O2. Before permanent installation is carried out, the material's resistance to the cleaning agent being used must be checked., Resistant against lactic acid & hydrogen peroxide (H2O2) DOL-1204-G02MRN 6058291 Head A: female connector, M12, 4-pin, straight Head B: Flying leads Cable: PP, unshielded, 5 m This product is generally resistant to chemical cleaning agents (see ECOLAB) and other chemical compounds such as H2O2 and CH2O2. Before permanent installation is carried out, the material's resistance to the cleaning agent being used must be checked., Resistant against lactic acid & hydrogen peroxide (H2O2) DOL-1204-G05MRN 6058476 Head A: female connector, M12, 4-pin, angled with LED Head B: Flying leads Cable: PP, unshielded, 2 m This product is generally resistant to chemical cleaning agents (see ECOLAB) and other chemical compounds such as H2O2 and CH2O2. Before permanent installation is carried out, the material's resistance to the cleaning agent being used must be checked., Resistant against lactic acid & hydrogen peroxide (H2O2) DOL-1204-L02MRN 6058482 Head A: female connector, M12, 4-pin, angled with LED Head B: Flying leads Cable: PP, unshielded, 5 m This product is generally resistant to chemical cleaning agents (see ECOLAB) and other chemical compounds such as H2O2 and CH2O2. Before permanent installation is carried out, the material's resistance to the cleaning agent being used must be checked., Resistant against lactic acid & hydrogen peroxide (H2O2) DOL-1204-L05MRN 6058483 Head A: female connector, M12, 4-pin, angled Head B: Flying leads Cable: PP, unshielded, 2 m This product is generally resistant to chemical cleaning agents (see ECOLAB) and other chemical compounds such as H2O2 and CH2O2. Before permanent installation is carried out, the material's resistance to the cleaning agent being used must be checked., Resistant against lactic acid & hydrogen peroxide (H2O2) DOL-1204-W02MRN 6058474 Head A: female connector, M12, 4-pin, angled Head B: Flying leads Cable: PP, unshielded, 5 m This product is generally resistant to chemical cleaning agents (see ECOLAB) and other chemical compounds such as H2O2 and CH2O2. Before permanent installation is carried out, the material's resistance to the cleaning agent being used must be checked., Resistant against lactic acid & hydrogen peroxide (H2O2) DOL-1204-W05MRN 6058477 Head A: female connector, M12, 4-pin, straight, A-coded Head B: Flying leads Cable: Sensor/actuator cable, PUR, halogen-free, unshielded, 2 m YF2A14-020UB3XLEAX 2095607 Head A: female connector, M12, 4-pin, straight, A-coded Head B: Flying leads Cable: Sensor/actuator cable, PUR, halogen-free, unshielded, 5 m YF2A14-050UB3XLEAX 2095608 Head A: female connector, M12, 4-pin, angled, A-coded Head B: Flying leads Cable: Sensor/actuator cable, PUR, halogen-free, unshielded, 5 m YG2A14-050UB3XLEAX 2095767 Mounting bracket for M30 sensors, steel, zinc coated, without mounting hardware Plug connectors and cables 6 PROXIMITY SENSORS | SICK Online data sheet | 2018-05-04 11:42:19 Subject to change without notice IMB30-15BPPVC0K | IMB INDUCTIVE PROXIMITY SENSORS Brief description Type Part no. Head A: male connector, M12, 4-pin, straight, A-coded Head B: Flying leads Cable: Sensor/actuator cable, PUR, halogen-free, unshielded, 2 m YM2A14-020UB3XLEAX 2095867 Head A: male connector, M12, 4-pin, straight, A-coded Head B: Flying leads Cable: Sensor/actuator cable, PUR, halogen-free, unshielded, 5 m YM2A14-050UB3XLEAX 2095858 Head A: male connector, M12, 4-pin, angled, A-coded Head B: Flying leads Cable: Sensor/actuator cable, PUR, halogen-free, unshielded, 5 m YN2A14-050UB3XLEAX 2096628 Head A: female connector, M12, 4-pin, angled Head B: male connector, M12, 4-pin, straight Cable: PP, unshielded, 2 m This product is generally resistant to chemical cleaning agents (see ECOLAB) and other chemical compounds such as H2O2 and CH2O2. Before permanent installation is carried out, the material's resistance to the cleaning agent being used must be checked., Resistant against lactic acid & hydrogen peroxide (H2O2) DSL-1204-B02MRN 6058502 Head A: female connector, M12, 4-pin, angled Head B: male connector, M12, 4-pin, straight Cable: PP, unshielded, 5 m This product is generally resistant to chemical cleaning agents (see ECOLAB) and other chemical compounds such as H2O2 and CH2O2. Before permanent installation is carried out, the material's resistance to the cleaning agent being used must be checked., Resistant against lactic acid & hydrogen peroxide (H2O2) DSL-1204-B05MRN 6058503 Head A: female connector, M12, 4-pin, straight Head B: male connector, M12, 4-pin, straight Cable: PP, unshielded, 2 m This product is generally resistant to chemical cleaning agents (see ECOLAB) and other chemical compounds such as H2O2 and CH2O2. Before permanent installation is carried out, the material's resistance to the cleaning agent being used must be checked., Resistant against lactic acid & hydrogen peroxide (H2O2) DSL-1204-G02MRN 6058499 Head A: female connector, M12, 4-pin, straight Head B: male connector, M12, 4-pin, straight Cable: PP, unshielded, 5 m This product is generally resistant to chemical cleaning agents (see ECOLAB) and other chemical compounds such as H2O2 and CH2O2. Before permanent installation is carried out, the material's resistance to the cleaning agent being used must be checked., Resistant against lactic acid & hydrogen peroxide (H2O2) DSL-1204-G05MRN 6058500 YF2A14-050UB3M2A14 2096001 Head A: female connector, M12, 4-pin, straight, A-coded Head B: male connector, M12, 4-pin, straight, A-coded Cable: Sensor/actuator cable, PUR, halogen-free, unshielded, 5 m 2018-05-04 11:42:19 | Online data sheet Subject to change without notice PROXIMITY SENSORS | SICK 7 Online data sheet SICK At A GlAnCe SICK is one of the leading manufacturers of intelligent sensors and sensor solutions for industrial applications. A unique range of products and services creates the perfect basis for controlling processes securely and eficiently, protecting individuals from accidents and preventing damage to the environment. We have extensive experience in a wide range of industries and understand their processes and requirements. With intelligent sensors, we can deliver exactly what our customers need. In application centers in Europe, Asia and North America, system solutions are tested and optimized in accordance with customer speciications. All this makes us a reliable supplier and development partner. Comprehensive services complete our offering: SICK lifetime Services provide support throughout the machine life cycle and ensure safety and productivity. For us, that is “Sensor Intelligence.” WOrldWIde preSenCe: Contacts and other locations www.sick.com SICK AG | Waldkirch | Germany | www.sick.com