ProLite 5W SMD Star BTP5-99XXCT-XX-X/W Package Dimension Features Highest Lumen Per Watt Long Operational Life White Housing Superior ESD Protection Instant Light (less than 100ns) Compatible to Luxeon’s “Lambertian” True SMD Emitter IR Reflow Soldering Process Note: Lens is low dome profile Tolerance: Applications ± see spec Unit: mm Accent Light/Down Light/Spot Light Automotive Exterior/Interior Light Large Area LCD Backlights Marine/Miner’s Lighting Portable Flashlight/ General Lighting Optical Characteristics at TJ=25ºC, IF=700mA PART NUMBER Emitting Color LED Chip Material Lens Color Wavelength (nm) CCT (K) Range Drive Luminous VIEW Voltage Flux (lm) ANGLE @ 700mA @700mA 2θ1/2 (deg) Min Max Typ. Typ. Water Clear 620 645 4.40V 120 Water Clear 610 620 4.40V 144 BTP5-99NRCT-XX-X/W Normal Red BTP5-99AMCT-XX-X/W Amber BTP5-99YECT-XX-X/W Yellow Water Clear 585 600 4.40V 112 BTP5-99BLCT-XX-X/W Blue Water Clear 460 490 7.10V 40 BTP5-99PGCT-XX-X/W Green Water Clear 520 545 7.10V 120 Water Clear 2800K 3800K 7.10V 96 Water Clear 5000K 8000K 7.10V 100 BTP5-99WWCT-XX-X/W Warm White BTP5-99WHCT-XX-X/W White AlInGaP AlInGaN 140 Notes: 1) Picture for illustration purpose only. Please refer to outline dimension for actual package size. 2) Flux is measured with the accuracy of ±15%. Please refer to Flux Selection Guide 3) CCT is measured with the accuracy of ± 400K. Please refer to CCT Selection Guide 4) VF is measured with the accuracy of ± 0.15V. Please refer to VF Selection Guide Part No.: BTP5-99XXCT-XX-X/W Rev1.2005 Page 1 of 7 DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dbelctro.com ProLite 5W SMD Star BTP5-99XXCT-XX-X/W Absolute Maximum Ratings at TJ=25ºC Parameter Red/Amber/Yellow White/Blue/Green 4.35 5.59 700 700 1000 1000 Average Forward Current (mA) 700 700 Reverse Voltage (V) 5 5 Reverse Current (uA) 50 50 16,000 16,000 120 135 Thermal Resistance Junction to Board (°C/W) 13 13 Temperature Coefficient of VF (mV/°C) -2 -2 Storage Temperature (°C) -40 to +105 -40 to +105 Operating Temperature (°C) -40 to +105 -40 to +105 Power Dissipation (W) [1] DC Forward Current (mA) Peak Pulsed Forward Current (mA) [4] ESD Sensitivity (V) [2] LED Junction Temperature at 350mA (°C) [3] Lead Soldering Temperature (°C)[4] 260°C for 5 seconds max 260°C for 5 seconds max Application Notes: 1. Proper forward current must be observed to maintain the junction temperature below maximum rating 2. Although all products listed are class two ESD protection (+/- 16KV by HBM mode), care must be fully taken when handling products 3. Specification is subjected to change for improvements without notice. 4. Test conditions: tp≤10us, duty cycle = 0.005 5. CAUTION: When lighting up, the emitter will become very hot if it is not attached to a heat sink. Please provide proper heat management to prevent damage to the emitter. Part No.: BTP5-99XXCT-XX-X/W Rev1.2005 Page 2 of 7 DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dbelctro.com ProLite 5W SMD Star BTP5-99XXCT-XX-X/W CCT, Flux and VF Selection Guide (@TJ=25ºC, IF=700mA) BTP5-99XXCT-XX-X/W White Housing Wavelength Ranks Selection Color Blue Green Red Amber Yellow Bin B5 B6 B7 B8 B9 B10 XX G7 G8 G9 G10 G11 XX XX XX XX Flux Ranks Selection λD(nm) Min Max 460 465 465 470 470 475 475 480 480 485 485 490 460 – 490 520 525 525 530 530 535 535 540 540 545 520 – 545 620 – 630 610 – 620 585 – 600 Warm White White Bin 00 01 XX 02 03 04 XX Bin Flux (lumens) P 23~30 Q 30~39 R 39~50 X Default Full Range T 65~85 U 85~111 V 111~144 W 144~187 X Default Full Range Blue Red Amber Yellow Green White VF Ranks Selection Color CCT Ranks Selection Color Temp Color CCT(K) Min Max 2800 3300 3300 3800 2800K – 3800K 5000 6000 6000 7000 7000 8000 5000K – 8000K Red Amber Yellow Warm White White Blue Green Bin VF (V) Min Max V12 V13 V14 V15 V16 V17 VXX(Full) V27 V29 V30 V31 V32 V33 VXX(Full) 3.6 3.8 3.8 4.0 4.0 4.2 4.2 4.4 4.4 4.6 4.6 4.8 3.6~4.8 6.8 7.0 7.0 7.2 7.2 7.4 7.4 7.6 7.6 7.8 7.8 8.0 6.8~8.0 (Please specify on order, otherwise, default full range of VF) Part No.: BTP5-99XXCT-XX-X/W Rev1.2005 Page 3 of 7 DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dbelctro.com ProLite 5W SMD Star BTP5-99XXCT-XX-X/W Typical Electro-Optical Characteristics Curves Fig. 1 Forward Current vs Ambient Temperature (Green, Blue and White) Fig. 2 Forward Current vs Ambient Temperature (Red, Amber and Yellow) Part No.: BTP5-99XXCT-XX-X/W Rev1.2005 Page 4 of 7 DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dbelctro.com ProLite 5W SMD Star BTP5-99XXCT-XX-X/W Part No.: BTP5-99XXCT-XX-X/W Rev1.2005 Page 5 of 7 DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dbelctro.com ProLite 5W SMD Star BTP5-99XXCT-XX-X/W Typical Electro-Optical Characteristics Curves Fig. 5a Relative Light Output vs Junction Temperature Fig. 5b Relative Light Output vs Junction Temperature Part No.: BTP5-99XXCT-XX-X/W Rev1.2005 Page 6 of 7 DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dbelctro.com ProLite 5W SMD Star BTP5-99XXCT-XX-X/W Relative Intensity(%) Typical Electro-Optical Characteristics Curves 100 90 80 70 60 50 40 30 20 10 0 -100 -80 -60 -40 -20 0 20 40 60 80 100 Angular Displacement(Degree) Fig. 6 Typical Radiation Pattern Other Important Notes z The information contained herein is presented only as a Guide for the application of our products. Brilliance Technologies assumes no responsibility for any infringement of intellectual property or other rights of the third parties which may result from its use. z Brilliance Technologies continually improves the quality of our products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsible of the customer, when using Brilliance Technologies products, to comply with the standard of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such Brilliance Technologies products cause loss of human life, bodily injury or damage to property. z Brilliance Technologies products listed in this data sheet are intended for usage in general electronics and/or non-commercial or industrial lighting products. These products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury. z In developing your design, please ensure that Brilliance Technologies products are used within specified operating ranges as set forth in the most recent Brilliance Technologies data sheets. BT-Rev. 1.0B20050120 Specifications are subject to change for improvement without notice. Copyright © 2003 Brilliance Technologies Co., Ltd. All rights reserved. Part No.: BTP5-99XXCT-XX-X/W Rev1.2005 Page 7 of 7 DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dbelctro.com