STATEK CXOLAT Ultra-low power/fast start-up/ultra-miniature Datasheet

CXOLAT OSCILLATOR
32.768 kHz
Ultra-Low Power/Fast Start-Up/Ultra-Miniature
DESCRIPTION
The CXOXLAT 32.768 kHz oscillator achieves the low
power comparable with a tuning fork design and the fast
start-up and tight frequency stability attained by an AT cut
crystal design. Designed for applications requiring ultralow current (15 µA), fast start-up time (15 ms), and a tight
frequency stability (±30 ppm to ±100 ppm) over a wide
temperature range (-55OC to +125OC). These oscillators
are also capable of withstanding significantly higher
shock than a standard tuning fork design.
FEATURES
Ultra-low current (typical 15 µA)
DIMENSIONS
Fast start-up (typical 15 ms)
Tight tolerance
High shock resistance
Low aging
CMOS output
Optional Output Enable/Disable with Tri-State
Hermetically sealed ceramic package
Full military testing available
Designed and manufactured in the USA
TYPICAL
DIM
inches
mm
MAXIMUM
inches
mm
A
0.126
3.20
0.130
3.30
B
0.059
1.50
0.063
1.60
C (SM1)
0.037
0.95
0.039
1.00
Communications
D
0.029
0.75
0.030
0.77
Navigation
E
0.020
0.50
0.021
0.52
APPLICATIONS
Military, Aerospace & Avionics
GPS
Industrial, Computer & Communications
Handheld instrumentation
Transponder/Animal migration
SUGGESTED LAND PATTERN
PIN CONNECTIONS
1. Output
2. Ground
3. Output Enable/Disable (E) or no connection (N)
4. VDD
10217 Rev A
STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256 www.statek.com
ABSOLUTE MAXIMUM RATINGS
SPECIFICATIONS
Supply Voltage VDD
-0.5 V to 5.0 V
Storage Temperature
-55OC to 125OC
Maximum Process Temperature 260OC for 20 seconds
Specifications are typical at 25 C unless otherwise noted.
Specifications are subject to change without notice. Tighter
specifications available (contact factory).
O
Supply Voltage
1.8 V to 3.3 V ±10%
Calibration Tolerance
±25 ppm
Frequency Stability
Over Temperature2
±10 to ±50 ppm for Commercial
±20 to ±100 ppm for Industrial
±50 to ±100 ppm for Military
Output Load (CMOS)
15 pF
Aging, first year
5 ppm
Shock
5,000 g, 0.3 ms, ½ sine
1
ENABLE/DISABLE OPTIONS (E/N)
For the 32.768 kHz CXOLAT, Statek offers two
enable/disable options: E and N. The E-version has a TriState output and stops oscillating internally when the
output is put into the high Z state. The N-version does not
have PIN 3 connected internally and so has no
enable/disable capability. The following table summarizes
the Enable/Disable option E.
20 g, 10-2,000 Hz swept sine
Vibration
3
Operating Temp. Range -10OC to 70OC (Commercial)
-40OC to 85OC (Industrial)
-55OC to 125OC (Military)
ENABLE/DISABLE OPTION E
FUNCTION TABLE
Enable (Pin 3 High*) Disable (Pin 3 Low)
1. Other tolerances available.
2. Does not include calibration tolerance. Other tolerances available.
3. Per MIL-STD-202G, Method 204D, Condition D. Random vibration testing also
available.
ELECTRICAL CHARACTERISTICS
Output
Frequency Output
High Z State
Oscillator
Oscillates
Stops
Current
15µA
Less than 1µA at 25OC
* When PIN 1 is allowed to float, it is held high by an internal pull-up resistor.
CXOLAT 32.768 kHz
All parameters are measured at 25ºC with a 10MΩ and
15pF load with VDD 3.3 V.
SYMBOL PARAMETER
MIN
VOH
Output Voltage High
0.9VDD
VOL
Output Voltage Low
tstartup
Start-up Time
tr
Rise Time (10%-90%)
2.8
10
ns
tf
Fall Time (10%-90%)
2.4
10
ns
MAX
UNIT
50
55
PACKAGING OPTIONS
V
CXOLAT
0.1VDD V
15
Duty Cycle
IDD
TYP
45
Current Consumption
ms
- Tray Pack
- 12 mm tape, 7” or 13” reels
(Per EIA 481)
%
µA
15
HOW TO ORDER CXOLAT 32.768 kHz SURFACE MOUNT CRYSTAL OSCILLATORS
CXOLAT
4
S
N
Supply Voltage
1 = 1.8 V
2 = 2.5 V
3 = 3.0 V
4 = 3.3 V
“S” if special or
custom design.
Blank if Std.
Enable/Disable
Option
E or N
SM3
,
Terminations
Blank = SM1
= Gold Plated
(Lead Free)
SM2 = Solder Plated
SM3 = Solder Dipped
SM4 = Solder Plated
SM5 = Solder Dipped
(Lead Free)
32.768k /
Frequency
k = kHz
50
/
Calibration
Tolerance
@ 250C
(in ppm)
50
/
Frequency
Stability over
Temp. Range
(in ppm)
Temp. Range:
C = -10OC to +70OC
I = -40OC to +85OC
M = -55OC to +125OC
S = Customer Specified
OR
/
/
I
/
50
Total
Frequency
Tolerance
(in ppm)
/
I
Temp. Range:
C = -10OC to +70OC
I = -40OC to +85OC
M = -55OC to +125OC
S = Customer Specified
10217 Rev A
STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256 www.statek.com
Similar pages