Click to see this datasheet in Simplified Chinese! FSA110 — Audio and Wired-OR USB2.0 Hi-Speed (480Mbps) Switch with Negative Signal Capability and Built-in Termination Features Description The FSA110 is a Double-Pole, Single Throw (DPST) switch that combines a low-distortion audio path with low off capacitance for USB applications. This configuration is ideal for wired-OR configurations, enabling shared USB2.0 Hi-Speed (HS) and audio on a single connector. The architecture is designed to allow audio signals to swing below ground so a common USB and headphone jack can be used for personal media players and portable peripheral devices. 6pF Typical Switch Off Capacitance for HS USB 2.5Ω Typical On Resistance for Audio Signaling Negative-Swing-Capable Audio Channel Automatic USB Detection Available Power-Off Protection on the D+/R, D-/L Ports Flow-Through Pin Out Eliminates PCB Vias Built-In Termination on Unselected Audio Paths Inhibits Audio Pop The FSA110 is configured for default USB transfer, which gives the user control of when the audio path is enabled. The audio path defaults to audio mute and is enabled with /OE. The FSA110 includes a power-off feature on the common port when VCC=0V to guarantee signal isolation. Applications Cell Phone, PDA, Digital Camera, and Notebook LCD Monitor, TV, and Set-Top Box IMPORTANT NOTE: For additional performance information, please contact [email protected]. Ordering Information Part Number Top Mark FSA110K8X A110 Green 8-Lead US8, JEDEC MO-187, Variation CA, 3.0mm Wide Package FSA110UMX GZ Green 10-Lead Quad, Ultrathin MLP, 1.4 x 1.8mm Package Description Eco Status For Fairchild’s definition of Eco Status, please visit: http://www.fairchildsemi.com/company/green/rohs_green.html VCC Rpu Control Block R /OE D+/R RT L D-/L RT Figure 1. © 2007 Fairchild Semiconductor Corporation FSA110 Rev. 1.0.2 Analog Symbol www.fairchildsemi.com FSA110 — Audio and Wired-OR USB2.0 Hi-Speed Switch with Negative Signal Capability and Built-in Termination November 2009 FSA110 — Audio and Wired-OR USB2.0 Hi-Speed Switch with Negative Signal Capability and Built-in Termination 12 www.fairchildsemi.com © 2007 Fairchild Semiconductor Corporation FSA110 Rev. 1.0.2