Teledyne AP031 High definition oscilloscope Datasheet

HDO4000
High Definition
Oscilloscopes
200 MHz – 1 GHz
Key Features
Combining Teledyne LeCroy’s HD4096 high definition 12-bit
•
technology, with long memory, a compact form factor, 12.1” touch
12-bit ADC resolution, up to
15-bit with enhanced resolution
•
200 MHz, 350 MHz, 500 MHz,
1 GHz bandwidths
•
•
•
•
•
•
ideal oscilloscope for precise measurements and quick debug.
Tools such as WaveScan Search and Find, LabNotebook Report
Generator, and History Mode help identify and isolate problems
L
ong Memory – up to 50 Mpts
for faster troubleshooting.
12.1” touch screen display
HD4096 Technology
Large 12.1” Touch Screen
HD4096 high definition technology
Navigating complicated user interfaces
consists of high sample rate 12-bit
is a thing of the past thanks to the
ADCs, high signal-to-noise input
large touch screen display of the
and Find
amplifiers and a low-noise system
HDO4000. The user interface was
LabNotebook Documentation
architecture. This technology enables
designed for touch screens which
Multi-language User Interface
WaveScan – Advanced Search
high definition oscilloscopes to capture
makes navigating the HDO4000
and Report Generation
and display signals of up to 1 GHz with
extremely intuitive. Every aspect of the
History Mode – Waveform
high sample rate and 16 times more
interface is touchable making channel,
resolution than other oscilloscopes.
timebase and trigger settings only
Playback
•
•
•
screen display and powerful debug tools, the HDO4000 is the
Spectrum Analyzer Mode
Power Analysis Software
Serial Data Trigger and Decode
Long Memory
one touch away.
With up to 50 Mpts of memory
Compact Form Factor
the HDO4000 High Definition
The HDO4000 builds upon Teledyne
Oscilloscopes can capture large
LeCroy’s history of “Large Screen,
amounts of data with more precision
Small Footprint” with its 12.1” wide
than other oscilloscopes. The 2.5 GS/s,
touch screen display and 5” depth.
50 Mpts architecture provides the
Additionally, the innovative rotating,
ability to capture a fast transient or a
tilting feet enable the HDO4000 to be
long acquisition.
placed in 4 different viewing positions
ensuring optimal viewing no matter
where it is being positioned in the lab.
HD4096 High Definition Technology
High Signal
to Noise Input
Amplifiers
High Sample
Rate 12-bit
ADC’s
Low Noise
System
Architecture
HD4096 high definition technology consists of
high sample rate 12-bit ADCs, high signal-to-noise
ratio amplifiers and a low-noise system architecture. This technology enables high definition
oscilloscopes to capture and display signals of
up to 1 GHz with high sample rate and 16 times
more resolution than other oscilloscopes.
Oscilloscopes with HD4096 technology have higher resolution
and measurement precision than 8-bit alternatives. The high
sample rate 12-bit ADCs provide high resolution sampling at
up to 2.5 GS/s. The high performance input amplifiers deliver
phenomenal signal fidelity with a 55 dB signal-to-noise ratio
and provide a pristine signal to the ADC to be digitized. The
low-noise signal architecture ensures that nothing interferes
with the captured signal and the oscilloscope displays a
waveform that accurately represents the signals from the
device under test.
16x Closer to Perfect
8-bit
12-bit
Digitized Waveform
Quantization Error
16x More Resolution
12-bits of vertical resolution provides sixteen times more resolution than 8-bits. The 4096 discrete
levels reduce the quantization error. Signals captured with lower resolution oscilloscopes have a higher
level of quantization error resulting in less accurate waveforms on the display. Signals captured on an
oscilloscope with 12-bit HD4096 technology are accurately displayed with minimal quantization error.
2
Signal from
Device Under Test
Debug in High Definition with hd4096
Oscilloscopes with HD4096 have a variety of benefits that
allow the user to debug in high definition. Waveforms
displayed by high definition oscilloscopes are cleaner and
crisper. More signal details can be seen and measured; these
measurements are made with unmatched precision resulting
in better test results and shorter debug time.
Clean, Crisp Waveforms
More Signal Details
When compared to waveforms
Signal details often lost in the
Unmatched
Measurement Precision
captured and displayed by 8-bit
noise are clearly visible and easy to
Precise measurements are critical for
oscilloscopes, waveforms captured
distinguish when captured on
effective debug and analysis. HD4096
with HD4096 technology are
oscilloscopes with HD4096. Details
enables oscilloscopes to deliver
dramatically crisper and cleaner.
which were previously difficult to
unmatched measurement precision to
Oscilloscopes with HD4096 acquire
even see can now be easily seen and
improve testing capabilities and provide
waveforms at high resolution, high
measured. Using the oscilloscope
better results.
sample rate and low noise to display
zoom capabilities gives an even closer
the most accurate waveforms.
look at the details for unparalleled
insight to the signals on screen.
8-bit
12-bit
A
B
A
C
B
A
Clean, Crisp Waveforms | Thin traces show the actual waveform with minimal noise interference
B
More Signal Details | Waveform details lost on an 8-bit oscilloscope can now be clearly seen
C
Unmatched Measurement Precision | Measurements are more precise and not affected by quantization noise
C
3
Touch Screen Simplicity
Don’t waste time searching through a complex menu
opened. Measurements can be touched to adjust their
structure to find the proper setting. Configuring the
settings and cursors can be positioned precisely by touch-
HDO4000 is simple thanks to the intuitive touch screen
ing and dragging them to the proper location. A box can be
user interface. Everything on the screen is interactive. To
drawn around a portion of a waveform to create a zoom of
adjust channel, timebase, or trigger settings, simply touch
that waveform. Even waveform offset and delay can be
the associated descriptor box and the appropriate menu is
adjusted simply by touching and dragging the waveform.
4
Tools for Efficient Debug and Validation
Spectrum Analyzer Mode
View the frequency content of
signals with spectrum analyzer style
controls, easily adjust the frequency
span, resolution bandwidth and center frequency. A unique peak search
detects spectral components and
presents frequency and level details
in an interactive table. Use the
spectrogram display to see changes
in the spectrum over time.
WaveScan Advanced
LabNotebook Documentation and
Serial Bus Trigger and Decode
Search and Find Tool
Report Generation Tool
View decoded protocol information
Quickly search waveforms for
Save all results and data with a single
on top of physical layer waveforms
runts, glitches or other anomolies
button press and create custom
and trigger on protocol specific
with WaveScan.
reports with LabNotebook.
messages.
Sequence Mode Acquisition
Advanced Math and Measure
History Mode Waveform Playback
Capture many fast pulses in quick
Use automatic measurement
Scroll back in time to isolate
succession or events separated by
parameters with statistics and
anomalies that have previously
long periods of time.
histicons as well as math functions to
been captured to quickly find the
understand every waveform detail.
source of the problem.
5
HDO4000 - High Definition Oscilloscope
HDO4000 High Definition Oscilloscopes
combine Teledyne LeCroy’s HD4096
high definition technology with long
memory and powerful debug tools in a
compact form factor with a 12.1” touch
screen display.
1. Only 13 cm (5”) Deep – The most
space-efficient oscilloscope for your
bench from 200 MHz to 1 GHz
2. 12.1” Widescreen (16 x 9) high resolution
WXGA color touch screen display. The most
time-efficient user interface is even easier to
use with a built-in stylus
3. Local language user interface – Select from
10 language preferences. Add a front panel
overlay with your local language
4. “Push” Knobs – All knobs have push
functionality that provides shortcuts to
common actions such as Set to Variable, Find
Trigger Level, Zero Offset, and Zero Delay
1
8
9
6
2
5. Waveform Control Knobs – Control channel,
zoom, math and memory traces with the
multiplexed vertical and horizontal knobs
6. Dedicated Cursor Knob – Select type of cursor,
position them on your signal, and read values
3
without ever opening a menu
7. Dedicated buttons to quickly access popular
debug tools.
8. Easy connectivity with two convenient USB
4
ports on the front, two on the side
9. Rotating and Tilting Feet provide 4 different
viewing positions
10. Auxiliary Output and Reference Clock
5
Input/Output connectors for connecting to
6
other equipment
11. USBTMC (Test and Measurement Class) port
simplifies programming
7
8
10 11
9
Document and Share:
• Quickly save all files with LabNotebook
• Create custom reports with LabNotebook
• Save to internal solid state or network drive
• Print to a USB printer
• Save to USB memory stick
• Connect with LAN or GPIB
• View data on a PC with free WaveStudio utility
7
Identify and Isolate Problems Faster
Advanced Waveform Capture
with Sequence Mode
Use Sequence mode to store up to
10,000 triggered events as “segments”
into memory. This can be ideal when
capturing many fast pulses in quick
succession or when capturing events
separated by long time periods.
Sequence mode provides timestamps
for each acquisition and minimizes
dead-time between triggers to less
than 1 μ­s. Combine Sequence mode
with advanced triggers to isolate rare
events over time and analyze afterwards.
WaveScan Advanced Search
WaveScan provides powerful isolation capabilities that hardware triggers can’t provide. WaveScan provides the ability
to locate unusual events in a single capture (i.e., capture and
search), or “scan” for an event in many acquisitions over a
long period of time with more than 20 search modes.
Advanced Math and Measure
With math functions including
averaging, enhanced resolution and
FFT plus a wide variety of measurement parameters the HDO4000 can
measure and analyze every aspect of a
waveform. By utilizing HD4096 technol-
8
Since the scanning “modes” are not
hours or days, enabling faster
ogy, the HDO4000 measures 16 times
simply copies of the hardware ­trig­gers,
debugging. When used in multiple
more precisely than traditional 8-bit
the utility and ­capa­bility is much higher.
acquisitions, WaveScan builds on the
architectures. Beyond just measuring
For instance, there is no “frequency”
­traditional Teledyne LeCroy strength
waveforms, the HDO4000 provides
trigger in any oscilloscope, yet
of fast ­processing of data. Quickly scan
statistics, histicons and trends to show
­WaveScan allows for “frequency”
millions of events looking for unusual
to be quickly “scanned.” This allows
occurrences, and do it much faster
how waveforms change over time.
the user to accumulate a data set of
and more efficiently than other
unusual events that are separated by
oscilloscopes can.
History Mode Waveform Playback
Scroll back in time using History Mode to view previous waveforms and isolate anomalies. Use cursors and
measurement parameters to quickly find the source of problems. History mode is always available with a
single button press, no need to enable this mode and never miss a waveform.
Go Back in Time to Identify the Source of a Problem
LabNotebook
The LabNotebook feature of HDO4000 provides a report generation tool to save and document all your work. Saving all
displayed waveforms, relevant settings, and screen images is all done through LabNotebook, eliminating the need to navigate
multiple menus to save all these files independently.
One-touch Functionality
print
er
Save You
r Work
Reca
ll Jo
bs
Waveform
V/div
T/div
Memory Length
Sample Rate
Measurement
Math
Hard Drive
usb Drive
oscilloScope Set Up
email
FLASHBACK
FLASHBACK
FLASHBACK
ork
Your W
t
n
e
m
Docu
LabNotebook
Screen Dump
Easy report generation helps
you share your findings and
communicate important results.
LabNotebook adds a simple way to
report your work and save all essential
waveforms, settings, and screen images.
Quickly save all the
necessary files with
LabNotebook in a
single button press.
Recall your settings
from any report
by using the
Flashback capability.
9
Spectrum Analyzer Mode
Key Features
•
Spectrum analyzer style controls
for the oscilloscope
•
•
Select from six vertical scales
Automatically identify frequency
peaks
•
Display up to 20 markers, with
interactive table readout of
frequencies and levels
•
Easily make measurements with
reference and delta markers
•
Automatically identify and
mark fundamental frequency
and harmonics
•
Simplify Analysis of FFT Power Spectrum
Get better insight to the frequency content of any signal with use of the
Spectrogram shows how spectra
Spectrum Analyzer mode on the HDO4000. This mode provides a spectrum
changes over time in 2D or
analyzer style user interface with controls for start/stop frequency or center
3D views
frequency and span. The resolution bandwidth is automatically set for best
analysis or can be manually selected. Vertical Scale can be selected as dBm,
dBV, dBmV, dBuV, Vrms or Arms for proper viewing and analysis while the
unique peak search automatically labels spectral components and presents
frequency and level in an interactive table. Utilize up to 20 markers to
automatically identify harmonics and quickly analyze frequency content by
making measurements between reference and delta markers. To monitor
how the spectrum changes over time, view the spectrogram which can
display a 2D or 3D history of the fequency content.
Spectrum analyzer style controls simplify waveform analysis in the frequency domain.
10
power Analyzer option
Key Features
•
Quickly analyze power conversion
circuits
•
Automatic switching device
measurements
•
Color coded overlay to identify
power losses
•
Control loop and time domain
response analysis
•
Line power and harmonics tests
to IEC 61000-3-2
Power Analyzer Automates Switching Device Loss Measurements
Quickly measure and analyze the operating characteristics of power conversion
devices and circuits with the Power Analyzer option. Critical power switching
device measurements, control loop modulation analysis, and line power harmonic testing are all simplified with a dedicated user interface and automatic
measurements. Areas of turn-on, turn-off, and conduction loss are all identified
with color-coded waveform overlays for faster analysis.
Power Analyzer provides quick and easy setup of voltage and current inputs
and makes measurements as simple as the push of a button. Tools are
provided to help reduce sources of measurement errors and the measurement
Teledyne LeCroy has a variety of
probes and probing accessories such
as high common mode rejection ratio
(CMRR) differential amplifiers,
differential probes, current probes,
and deskew fixtures.
parameters provide details of single cycle or average device power losses.
Beyond the advanced power loss measurement capabilities,
the Power Analyzer modulation analysis
capabilities provide insight to
understand control loop
response to critical events such
as a power supply’s soft start
performance or step response
to line and load changes. The
Line Power Analysis tool allows
simple and quick pre-compliance testing to EN 61000-3-2.
11
Serial Trigger and Decode Options
Debugging serial data busses can
Protocol decoding is shown directly
be confusing and time consuming.
on the waveform with an intuitive,
The serial data trigger and decode
color-coded overlay and presented
options for HDO4000 provide time
in binary, hex or ASCII. Decoding
saving tools for serial bus debug and
on the HDO4000 is fast even with
validation.
long memory and zooming in to the
The serial data trigger will quickly
waveform shows precise byte by byte
isolate events on a bus eliminating
decoding.
the need to set manual triggers and
To further simplify the debug process
hoping to catch the right information.
all decoded data can be displayed in
Trigger conditions can be entered
a table below the waveform grid.
in binary or hexadecimal formats
Selecting an entry in the table with
and conditional trigger capabilities
the touch screen will display just
even allow triggering on a range of
that event. Additionally, built-in
different events.
search functionality will find specific
Supported Serial Data
Protocols
• I2C, SPI, UART
• CAN, LIN, FlexRay™, SENT
• USB 1.0/1.1/2.0, USB 2.0-HSIC
• Audio (I2S, LJ, RJ, TDM)
• MIL-STD-1553, ARINC 429
• MIPI D-PHY, DigRF 3G, DigRF v4
decoded values.
View decoded protocol information on top of physical layer waveforms and trigger on protocol specific messages.
12
probes
The right probe is an essential tool for accurate signal capture and Teledyne LeCroy offers an extensive range of
probes to meet virtually every probing need.
ZS Series High Impedance
Active Probes
ZS2500, ZS1500, ZS1000,
ZS2500-QUADPAK,
ZS1500-QUADPAK,
ZS1000-QUADPAK
The ZS Series probes provide high impedance and an
extensive set of probe tips and ground accessories to
handle a wide range of probing scenarios. The high
1 MΩ input resistance and low 0.9 pF input capacitance
mean this probe is ideal for all frequencies. The ZS Series
probes provide full system bandwidth for all Teledyne
LeCroy oscilloscopes having bandwidths of 1 GHz
and lower.
Differential Probes
(200 MHz – 1.5 GHz)
ZD1500, ZD1000, ZD500,
ZD200
High bandwidth, excellent common-mode rejection ratio
(CMRR) and low noise make these ­active differential
probes ideal for applications such as automotive
development (e.g. FlexRay) and failure analysis, as well
as wireless and data communication design. The ProBus
interface ­allows sensitivity, offset and common-mode
range to be displayed on the oscilloscope screen.
High Voltage
Differential Probes
ADP305, ADP300, AP031
Low cost active differential probes are intended for
measuring higher voltages. The ­differential techniques
employed permit measurements to be taken at two
points in a circuit without reference to the ground,
allowing the oscilloscope to be safely grounded without
the use of opto-isolators or isolating transformers.
High Voltage
Passive Probes
PPE1.2KV, PPE20KV,
PPE2KV, PPE4KV, PPE5KV,
PPE6KV
The PPE Series includes five fixed-attenuation probes
covering a range from 2 kV to 20 kV, and one switchable
probe providing ÷10/÷100 attenuation for voltage inputs
up to 1.2 kV. All fixed-attenuation, standard probes
automatically rescale compatible Teledyne LeCroy
oscilloscopes for the ­appropriate attenuation of the probe.
Current Probes
CP031, CP030, AP015,
CP150, CP500, DCS015
Available current probes reach bandwidths of 100 MHz,
peak currents of 700 A and ­sensitivities of 10 mA/div. Use
multiple current probes to make measurements on threephase systems or a single current probe with a voltage
probe to make instantaneous power measurements.
Teledyne LeCroy current probes enable the design and
testing of switching power supplies, motor drives, electric
vehicles, and uninterruptible power supplies.
13
specifications
HDO4022
HDO4024
HDO4032
HDO4034
HDO4054
HDO4104
500 MHz
700 ps typical
4
1 GHz
450 ps typical
4
Vertical
Bandwidth (@ 50Ω)
Rise time
Input Channels
Vertical Resolution
Sensitivity
DC Gain Accuracy
BW Limit
Maximum Input Voltage
Input Coupling
Input Impedance
Offset Range
Offset Accuracy
200 MHz
1.75 ns typical
350 MHz
1 ns typical
2
4
2
4
12-bits; up to 15-bits with enhanced resolution (ERES)
50 Ω: 1mV/div - 1 V/div; 1 MΩ: 1 mV/div - 10 V/div
±(0.5%) Full Scale, offset at 0 V
20 MHz, 200 MHz
50 Ω: 5 Vrms; 1 MΩ: 400 V max (DC + Peak AC ≤ 10 kHz)
50 Ω: DC, GND; 1 MΩ: AC, DC, GND
50 Ω ±2.0%, 1 MΩ ±2.0% || 15 pF
50 Ω: 1 mV - 4.95 mV: ±1.6 V, 5 mV - 9.9 mV: ±4 V, 10 mV - 19.8 mV: ±8 V, 20 mV - 1 V: ±10 V
1 MΩ: 1 mV - 4.95 mV: ±1.6 V, 5 mV - 9.9 mV: ±4 V, 10 mV - 19.8 mV: ±8 V, 20 mV - 100 mV: ±16 V,
102 mV - 198 mV: ±80V, 200 mV - 1 V: ±160 V, 1.02 V -10 V: ±400 V
±(1.0% of offset value + 0.5%FS + 0.02% of max offset + 1 mV)
Acquisition
Sample Rate (Single-shot)
Sample Rate (Repetitive)
Record Length
Acquisition Modes
Timebase Range
Timebase Accuracy
2.5 GS/s
125 GS/s
Standard -STD: 12.5 Mpts/ch (all channels) 25 Mpts (interleaved)
Optional -L:
25 Mpts/ch (all channels), 50 Mpts (interleaved)
Real Time, Roll, RIS (Random Interleaved Sampling),
Sequence (Segmented Memory up to 10,000 segments with 1μs intersegment time)
20 ps/div–10000 s/div; RIS available at ≤ 10 ns/div; Roll Mode available at ≥ 100 ms/div and ≤ 5 MS/s
±2.5 ppm for 5 to 40C + 1.0 ppm/year from calibration
Trigger System
Modes
Sources
Coupling
Pre-trigger Delay
Post-trigger Delay
Hold-off
Internal Trigger Level Range
External Trigger Level Range
Trigger Types
Auto, Normal, Single, Stop
Any input channel, External, Ext/10, or line; slope and level unique to each source (except for line trigger)
DC, AC, HFREJ, LFREJ
0-100% of full scale
0-10,000 Divisions
2ns up to 20s or 1 to 1,000,000,000 events
±4.1 Divisions
Ext: ±400mV, Ext/10: ±4V
Edge, Glitch, Width, Logic (Pattern), TV (NTSC, PAL, SECAM, HDTV–720p, 1080i, 1080p), Runt, Slew Rate,
Interval (signal or Pattern), Dropout, Qualified (State or Edge)
Measure, Zoom and Math Tools
Measurement Parameters
Zooming
Math Functions
14
Up to 8 of the following parameters can be calculated at one time on any waveform: Amplitude, Area, Base (Low),
Delay, Delta Period @ Level, Delta Time @ Level, Duty, Duty @ Level, Edge @ Level, Fall Time (90%–10%),
Fall Time (80%–20%), Frequency, Frequency @ level, Maximum, Mean, Minimum, Overshoot+, Overshoot-,
Peak-Peak, Period, Period @ Level, Phase, Rise Time (10%–90%), Rise Time (20%–80%), RMS, Skew,
Standard Deviation, Time @ Level, Top (High), Width+, Width-. Statistics and Histicons can be added to any
measurement and all measurements can be gated.
Use front panel QuickZoom button, or use touch screen or mouse to draw a box around the zoom area.
Functions include Sum, Difference, Product, Ratio, Absolute Value, Averaging (summed and continuous), Derivative,
Envelope, Enhanced Resolution (to 15-bits), Floor, Integral, Invert, Reciprocal, Rescale (change scale and units), Roof,
Square, Square Root, Trend, Zoom and FFT (up to 1 Mpts with power spectrum output and rectangular, VonHann, and
FlatTop windows). 2 dual operator math functions may be defined at a time.
specifications
HDO4022
HDO4024
HDO4032
HDO4034
HDO4054
HDO4104
Probes
Standard Probes
Probing System
One PP017 (5mm) per channel
One PP018(5mm) per channel
BNC and Teledyne LeCroy ProBus for Active voltage, current and differential probes
Display System
Display Size
Display Resolution
12.1” Wide TFT-LCD Touch-Screen
1280 x 800
Connectivity
Ethernet Port
USB Host Ports
USB Device Port
GPIB Port (Optional)
External Monitor Port
Remote Control
(2) 10/100/1000Base-T Ethernet interface (RJ-45 connector)
(6) USB Ports Total – (2) Front USB Ports
(1) USBTMC
Supports IEEE – 488.2
Standard 15-pin D-Type SVGA-compatible DB-15 connector, DVI connector and HDMI connector
Via Windows Automation, or via Teledyne LeCroy Remote Command Set
Processor/CPU
Type
Processor Memory
Operating System
Disk Type
Intel B810 Celeron processor 1.6 GHz or better
2 GB Standard
Windows Embedded Standard 7 64-Bit
Solid State Drive 64 GB or greater
Power Requirements
Voltage
Power Consumption (Nominal)
Max Power Consumption
100-240 VAC + 10% at 45-440 Hz; Automatic AC Voltage Selection
200 W / 200 VA
Max Power Consumption 320 W / 320 VA (with all PC peripherals and active probes connected to 4 channels)
Environmental
Temperature
Humidity
Altitude
Operating: 5 °C to 40 °C; Non-Operating: -20 °C to 60 °C
Operating: 5% to 90% relative humidity (non-condensing) up to +31 °C, Upper limit derates to 50% relative humidity
(non-condensing) at +40 °C; Non-Operating: 5% to 95% relative humidity (non-condensing) as tested per
MIL-PRF-28800F
Operating: 3,048 m (10,000 ft) max at ≤ 30C; Non-Operating: Up to 12,192 meters (40,000 ft)
Physical
Dimensions (HWD)
Weight
11.48”H x 15.72”W x 5.17“D (291.7 mm x 399.4 mm x 131.31 mm)
5.86 kg (12.9 lbs)
Regulatory
CE Certification
UL and cUL Listing
Low Voltage Directive 2006/95/EC
EN 61010-1:2010, EN 61010-2-030:2010
EMC Directive 2004/108/EC
EN 61326-1:2006, EN61326-2-1:2006
UL 61010-1 (3rd Edition), UL 61010-2-030 (1st Edition)
CAN/CSA C22.2 No.61010-1-12
15
ordering information
Product Description
Product Code
HDO 4000 Oscilloscopes
HDO4022
HDO4024
HDO4032
HDO4034
HDO4054
HDO4104
÷10 Passive Probe (Total of 1 Per Channel), Getting Started Guide,
Anti-virus Software (Trial Version), Microsoft Windows Embedded Standard
7 P 64-Bit License, Commercial NIST Traceable Calibration with
Certificate, Power Cable for the Destination Country, 3-year Warranty
Memory Option
25 Mpts/CH (50 Mpts interleaved) memory
HDO4K-L
Hardware Options
Removable Solid State Drive Package (includes
removable solid state drive kit and two hard drives
Additional Removable Solid State Drive
HDO4K-RSSD
HDO4K-RSSD-02
General Accessories
USB2-GPIB
HDO4K-SOFTCASE
HDO4K-RACK
HDO4K-POUCH
Local Language Overlays
HDO4K-A-FP-GERMAN
HDO4K-A-FP-FRENCH
HDO4K-A-FP-ITALIAN
HDO4K-A-FP-SPANISH
HDO4K-A-FP-JAPANESE
HDO4K-A-FP-KOREAN
HDO4K-A-FP-CHNES-TR
HDO4K-A-FP-CHNES-SI
HDO4K-A-FP-RUSSIAN
250 MHz Passive Probe for HDO4000 and
PP017
HDO6000, 10:1, 10 MOhm
500 MHz Passive Probe for HDO4000 and
PP018
HDO6000, 10:1, 10 MOhm
ZS1500-QUADPAK
Set of 4 ZS1500, 1.5 GHz, 0.9 pF, 1 MΩ
High Impedance Active Probe
ZS1000-QUADPAK
Set of 4 ZS1000, 1 GHz, 0.9 pF, 1 MΩ
High Impedance Active Probe
ZD200
200 MHz, 3.5 pF, 1 MΩ Active Differential Probe
ZD500
500 MHz, 1.0 pF, 1 MΩ Active Differential Probe
ZD1000
1 GHz, 1.0 pF, 1 MΩ Active Differential Probe
ZD1500
1.5 GHz, 1.0 pF, 1 MΩ Active Differential Probe
1,400 V, 100 MHz High-Voltage Differential Probe
ADP305
1,400 V, 20 MHz High-Voltage Differential Probe
ADP300
1 Ch, 100 MHz Differential Amplifier
DA1855A
with Precision Voltage Source
CP031
30 A; 100 MHz Current Probe – AC/DC; 30 Arms; 50 Apeak Pulse
30 A; 50 MHz Current Probe – AC/DC; 30 Arms; 50 Apeak Pulse
CP030
AP015
30 A; 50 MHz Current Probe – AC/DC; 30 Arms; 50 Apeak Pulse
CP150
150 A; 10 MHz Current Probe – AC/DC; 150 Arms; 500 Apeak Pulse
CP500
500 A; 2 MHz Current Probe – AC/DC; 500 Arms; 700 Apeak Pulse
10:1/100:1 200/300 MHz, 50 MΩ High-voltage Probe
PPE1.2KV
600 V/1,2 kV Max. Volt. DC
100:1 400 MHz 50 MΩ 2 kV High-voltage Probe
PPE2KV
100:1 400 MHz 50 MΩ 4 kV High-voltage Probe
PPE4KV
1000:1 400 MHz 50 MΩ 5 kV High-voltage Probe
PPE5KV
1000:1 400 MHz 50 MΩ 6 kV High-voltage Probe
PPE6KV
1000:1 100 MHz 50 MΩ 6 kV High-voltage Probe
PPE20KV
20 kV Max. Volt DC + 40 kVPeak AC
Customer Service
Software Options
Electrical Telecom Mask Test Package
Spectrum Analysis Option
Power Analysis Option
FlexRay Trigger and Decode Option
HDO4K-FlexRaybus TD
HDO4K-SENTbus D
SENT Decode Option
MIL-STD-1553 Trigger and Decode Option
HDO4K-1553 TD
ARINC 429 Symbolic Decode Option
HDO4K-ARINC429bus DSymbolic
USB 2.0 Trigger and Decode Option
HDO4K-USB2bus TD
USB2-HSIC Decode Option
HDO4K-USB2-HSICbus D
HDO4K-DPHYbus D
D-PHY Decode Option
DigRF 3G Decode Option
HDO4K-DigRF3Gbus D
DigRF v4 Decode Option
HDO4K-DigRFv4bus D
HDO4K-Audiobus TD
Audiobus Trigger and Decode Option for
I2S, LJ, RJ, and TDM
Probes and Amplifiers
Included with Standard Configuration
German Front Panel Overlay
French Front Panel Overlay
Italian Front Panel Overlay
Spanish Front Panel Overlay
Japanese Front Panel Overlay
Korean Front Panel Overlay
Chinese (Tr) Front Panel Overlay
Chinese (Simp) Front Panel Overlay
Russian Front Panel Overlay
Product Code
Serial Data Options (cont’d)
200 MHz, 2.5 GS/s, 2 Ch, 12.5 Mpts/Ch 12-bit HD
Oscilloscope with 12.1" WXGA Touch Display
200 MHz, 2.5 GS/s, 4 Ch, 12.5 Mpts/Ch 12-bit HD
Oscilloscope with 12.1" WXGA Touch Display
350 MHz, 2.5 GS/s, 2 Ch, 12.5 Mpts/Ch 12-bit HD
Oscilloscope with 12.1" WXGA Touch Display
350 MHz, 2.5 GS/s, 4 Ch, 12.5 Mpts/Ch 12-bit HD
Oscilloscope with 12.1" WXGA Touch Display
500 MHz, 2.5 GS/s, 4 Ch, 12.5 Mpts/Ch 12-bit HD
Oscilloscope with 12.1" WXGA Touch Display
1 GHz, 2.5 GS/s, 4 Ch, 12.5 Mpts/Ch 12-bit HD
Oscilloscope with 12.1" WXGA Touch Display
External GPIB Accessory
Soft Carrying Case
Rack Mount Accessory
Accessory Pouch
Product Description
HDO4K-ET-PMT
HDO4K-SPECTRUM
HDO4K-PWR
Serial Data Options
I2C, SPI and UART Trigger and Decode Option
HDO4K-EMB
HDO4K-I2Cbus TD
I2C Bus Trigger and Decode Option
SPI Bus Trigger and Decode Option
HDO4K-SPIbus TD
UART and RS-232 Trigger and Decode Option
HDO4K-UART-RS232bus TD
CAN, LIN and FlexRay Trigger and Decode Option
HDO4K-AUTO
LIN Trigger and Decode Option
HDO4K-LINbus TD
HDO4K-CANbus TD
CAN TD Trigger and Decode Option
1-800-5-LeCroy
teledynelecroy.com
Teledyne LeCroy oscilloscopes and probes are designed, built, and
tested to ensure high reliability. In the unlikely event you experience
difficulties, our digital oscilloscopes are fully warranted for three years
and our probes are warranted for one year. This warranty includes:
• No charge for return shipping
• Long-term 7-year support
• Upgrade to latest software at no charge
Local sales offices are located throughout the world.
Visit our website to find the most convenient location.
© 2012 Teledyne LeCroy. All rights reserved. Specifications, prices, availability, and delivery subject to change without notice.
Product or brand names are trademarks or requested trademarks of their respective holders.
hdo4k-ds-15nov12
Similar pages