Green 1310nm/CWDM Micro-Optic WDM MWDMG13CS Series Product Description Oplink’s Micro-Optic Wavelength Division Multiplexer (MWDM) is based on thin-film filter technology and patented athermal platform for optical device. The MWDM13CS is used to combine or separate1310nm band and CWDM signals. This device offers very flat and wide passband, low insertion loss, and high isolation, which make it ideal for CWDM Network applications and Optical Amplification Systems. Oplink MWDM devices are Bellcore GR-1221 qualification tested and complied with industry green initiatives such as Rohs and WEEE. All Oplink products are epoxy-free in the optical path. Performance Specificationns MWDMG13CS Series Pass Channel Wavelength Range λ1 Reflection Channel Wavelength Range λ2 Max Unit Type 13CS 1260 1360 nm Type CS13 1460 1620 nm Type 13CS 1460 1620 nm Wide Operating Wavelength Range Type CS13 1260 1360 nm Compact Size 0.7 dB Low Insertion Loss 0.7 : High Isolation 0.5 : Standard dB Pass Channel @ λ1 Insertion Loss * Isolation Reflect Channel @ λ2 Reflect Channel @ λ1 Pass Channel @ λ2 40 dB Epoxy-free Optical Path dB 50 dB Return Loss 50 dB Polarization Dependent Loss 0.1 dB Polarization Mode Dispersion 0.05 ps Maximum Power Handling 500 mW Corning SMF-28 Storage Temperature 250 μm Bare Fiber 900 μm Loose Tube Ultra Low PDL and PMD Highly Stable & Reliable Directivity Operating Temperature High Channel Isolation dB 0.3 Fiber Type Environmental Green Plan Compliance 30 : High Isolation 15: Standard Passband Ripple Package Dimensions ** Features Min 0 to +70 °C -40 to +85 °C P1: (ø) 5.5 x (L) 34.0 P2: (ø) 5.5 x (L) 40.0 mm Applications Bi-directional WDM Systems Uni-directional WDM Systems System Monitoring Transmitters & Fiber Laboratory R&D Note: * Values are referenced without connector loss. ** The mechanical tolerance should be +/-0.2 mm on all package dimensions unless otherwise custom specified. R03.20081106 Green 1310nm/CWDM Micro-Optic WDM MWDMG13CS Series Mechanical Drawing / Package Dimensions (dimension in mm) P1: 250µm bare fiber 46335 Landing Pkwy Fremont, CA 94538 Tel: (510) 933-7200 Fax: (510) 933-7300 Email: [email protected] • www.oplink.com P2: 900µm loose tube Ordering Information Oplink can provide a remarkable range of customized optical solutions. For detail, please contact Oplink’s OEM design team or account manager for your requirements and ordering information (510) 933-7200. MWDMG 0 Wavelength 1300nm pass = 13CS CWDM pass = CS13 Grade Fiber Length* High Isolation = H Standard = S 0.5 Meter = H 1.0 Meter = 1 1.5 Meters = 5 2.0 Meters = 2 Package & Fiber Jacket P1 + 250μm bare fiber = 11 P2 + 900μm loose tube = 22 Connector Type None = 1 FC/PC = 2 FC/SPC = 3 FC/APC = 4 SC/PC = 5 SC/SPC = 6 SC/APC = 7 ST = 8 LC = 9 MU = A * The tolerance of fiber length is +/-0.1m. 1 meter is standard. The lead-time for special fiber length will be longer. R03.20081106 Product Lines: Mux/Demux Switching/Routing Coupling/Splitting Monitoring/Conditioning Amplification Transmission Interconnect RGB Laser Modules