Hamamatsu H8711-01 4 ã 4 multianode, high speed response, low cross-talk, 30 mm square bialkali and multialkali photocathode Datasheet

MULTIANODE
PHOTOMULTIPLIER TUBE ASSEMBLY
H8711 SERIES
PATENT
4 × 4 Multianode, High Speed Response, Low Cross-talk, 30 mm Square
Bialkali and Multialkali Photocathode, 12-stage, Head-on Type
FEATURES
●4 × 4 Multianode, Anode Size: 4.2 mm × 4.2 mm / Anode
●Effective Area: 18.1 mm × 18.1 mm
●High Speed Response
●Low Cross-talk: 1 % Typ.
●High Cathode Sensitivity
Luminous 200 µA/lm Typ. (-01 Type)
Luminous 500 µA/lm Typ. (-20 Type)
●Weight: Approx. 50 g
APPLICATIONS
●High Energy Physics
●Flow Cytometer (-01, -20 Type)
●DNA Sequencer (-01, -20 Type)
Figure 1: Typical Spectral Response
100
R8711-200
100
R871-100
10
R8711
R8711-10
R8711-03
R8711-13
1
0.1
CATHODE RADIANT SENSITIVITY
QUANTUM EFFICIENCY
0.01
100 200 300 400 500 600 700
WAVELENGTH (nm)
CATHODE RADIANT SENSITIVITY (mA/W)
QUANTUM EFFICIENCY (%)
CATHODE RADIANT SENSITIVITY (mA/W)
QUANTUM EFFICIENCY (%)
1000
10
TPMHB0739EB
-04 TYPE
-14 TYPE
-01 TYPE
-20 TYPE
1
0.1
CATHODE RADIANT SENSITIVITY
QUANTUM EFFICIENCY
800 900 1000
0.01
100 200 300 400 500 600 700
800 900 1000
WAVELENGTH (nm)
Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult with our sales office.
Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are
subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2010 Hamamatsu Photonics K.K.
MULTIANODE
PHOTOMULTIPLIER TUBE ASSEMBLIES H8711 SERIES
Spectral Response
Type No.
A
B
C
Maximum Ratings
Supply
Dynode Voltage
PhotoBetween
Peak
Window
Wavelength cathode Material Structure Anode
and
Material
/ Stages
Cathode
Range
(nm)
Normal Divider Type
H8711
300 to 650
H8711-01
300 to 880
H8711-03
185 to 650
H8711-04
185 to 880
H8711-20
300 to 920
H8711-100 300 to 650
H8711-200 300 to 650
Taper Divider Type
H8711-10
300 to 650
H8711-11
300 to 880
H8711-13
185 to 650
H8711-14
185 to 880
(nm)
D
Average
Anode
Output
Current
in Total
(V)
(mA)
Cathode Characteristics
Luminous
Red/
Blue
Sensitivity White Radiant
Index Ratio
(CS 5-58) (R-68)
Typ.
Typ.
Typ.
Min.
Typ.
(µA/lm) (µA/lm)
(mA/W)
420
420
420
420
530
400
400
BA
MA
BA
MA
MA
SBA
UBA
K
K
U
U
K
K
K
MC/12
MC/12
MC/12
MC/12
MC/12
MC/12
MC/12
-1000
-1000
-1000
-1000
-1000
-1000
-1000
0.017
0.017
0.017
0.017
0.017
0.017
0.017
60
150
60
150
350
90
110
80
200
80
200
500
105
135
9.5
—
9.5
—
—
13.5
13.5
—
0.25
—
0.25
0.4
—
—
80
65
80
65
78
110
130
420
420
420
420
BA
MA
BA
MA
K
K
U
U
MC/12
MC/12
MC/12
MC/12
-1000
-1000
-1000
-1000
0.017
0.017
0.017
0.017
60
150
60
150
80
200
80
200
9.5
—
9.5
—
—
0.25
—
0.25
80
65
80
65
NOTE: A BA: Bialkali, MA: Multialkali, SBA: Super Bialkali, UBA: Ultra Bialkali
B K: Borosilicate glass, U: UV glass
C MC: Metal channel
D The maximum average anode current is defined as 5 % of divider current when standard high voltage is applied.
Figure 2: Typical Gain
107
106
TPMHB0331EA
H8711-100
H8711-200
H8711
H8711-03
H8711-10
H8711-13
105
H8711-11
H8711-14
H8711-20
104
SUPPLY VOLTAGE : -800 V
RISE TIME
: 835 ps
FALL TIME
: 2047 ps
WIDTH
: 1658 ps
RL
: 50 Ω
H8711-01
H8711-04
103
TIME (2 ns/div.)
102
500
600
700
800
SUPPLY VOLTAGE (V)
900
1000
Figure 4: TTS Characteristic (Example)
TPMHB0314EB
104
RELATIVE COUNTS
GAIN
Figure 3: Time Response (Example)
TPMHB0690EC
OUTPUT VOLTAGE (2 mV/div.)
108
SUPPLY VOLTAGE: - 800 V
FWHM: 310 ps
FWTM: 631 ps
103
102
101
100
TIME (0.5 ns/div.)
Anode to
Cathode
Supply
Voltage
Luminous
Min. Typ.
(A/lm) (A/lm)
(V)
Anode Characteristics
Dark Current
Time Response
per Channel
Gain
Rise Transit
TTS
Time
(After 30 min) Time
Typ. Max.
Typ.
Typ.
Typ.
Typ.
(nA)
(nA)
(ns)
(ns)
(ns)
-800
-800
-800
-800
-800
-800
-800
80
50
80
50
50
50
50
280
150
280
150
250
210
270
3.5 × 106
0.8 × 106
3.5 × 106
0.8 × 106
0.5 × 106
2.0 × 106
2.0 × 106
-800
-800
-800
-800
20
10
20
10
70
35
70
35
0.9 × 106
0.2 × 106
0.9 × 106
0.2 × 106
0.8
0.4
4
2
0.83
0.83
12.0
12.0
Pulse Linearity
per Channel
2%
5%
Deviation Deviation
(mA)
0.33
Type No.
Typ.
Max.
1
1: 2.5
1: 3
1: 2.5
1: 3
1: 3
1: 2.5
1: 2.5
1: 4
1: 5
1: 4
1: 5
1: 5
1: 4
1: 4
H8711
H8711-01
H8711-03
H8711-04
H8711-20
H8711-100
H8711-200
3
1: 2.5
1: 3
1: 2.5
1: 3
1: 4
1: 5
1: 4
1: 5
H8711-10
H8711-11
H8711-13
H8711-14
(mA)
0.5
0.33
Uniformity
Between
Each Anode
1.5
VOLTAGE DISTRIBUTION RATIO AND SUPPLY VOLTAGE
Electrodes
K
Dy1
Dy2
Dy3
Dy4
Dy5
Normal Divider Type
2
2
2
1
1
Tapered Divider Type
2.4
2.4
2.4
1
1
Supply Voltage: -800 V, K: Cathode, Dy: Dynode, P: Anode
...
Dy9
1 ... 1
1 ... 1
Dy10
1
1
Dy11
Dy12
P
1
1
1.2
2.4
1
1
Figure 5: Pulse Linearity per Channel (Example)
TPMHB0691EA
10
10
TPMHB0692EA
PULSE WIDTH: 50 ns
REPETITION: 1 kHz
SUPPLY VOLTAGE: -800 V
PULSE WIDTH: 50 ns
REPETITION: 1 kHz
SUPPLY VOLTAGE: -800 V
DEVIATION (%)
DEVIATION (%)
0
Divider Ratio
2:2:2 :1:⋅⋅⋅⋅:1:1:1
-10
-20
10-2
10-1
100
OUTPUT CURRENT (mA)
H8711
Figure 6: Anode Cross-talk (Example)
0.1
0.8
0.1
*
0.5
100
0.3
*
0.1
0.3
0.1
*
*
*
*
*
Supply Voltage: -800 V
Light Source: Tungsten Lamp (uniform DC light)
Spot Illumination: 4 mm × 4 mm
101
0
Divider Ratio
2.4 : 2.4 : 2.4 : 1 : ⋅ ⋅ ⋅ ⋅ : 1 : 1.2 : 2.4
-10
-20
10-2
10-1
100
OUTPUT CURRENT (mA)
H8711-10
101
MULTIANODE
PHOTOMULTIPLIER TUBE ASSEMBLIES H8711 SERIES
Figure 7: Dimensional Outline and Basing Diagram (Unit: mm)
POM CASE
14
45.0 ± 0.8
0.8 MAX.
4.5
DY
GND
-HV
P8
P9
13
4.5
P16
GND
2.8
2.54
2.54 × 7=17.78
18.1
25.7
SIDE VIEW
BOTTOM VIEW
TOP VIEW
GND
DY12 OUTPUT
GUIDE
MARK
ANODE OUTPUTS (P1 to P8)
TERMINAL PINS ( 0.46)
BDL-108, SAMTEC
2
0.65
3
4-SCREWS
(M2)
12.7
P1
2.54
15
30.0 ± 0.5
8.7
16
18.1
1
9.3
0.3
2
25.7
3
DIVIDER
ASSEMBLY
7.62
4- 0.3
GUIDE MARKS
0.3
4
PMT:
R7600-M16 SERIES
2.54
8.7
5.08
9.3
Y
THROUGH HOLE
(NO CONNECTION)
-HV INPUT
PIN CONNECTION
P1 P2 P3 P4 P5 P6 P7 P8
GND GND GND GND GND GND GND GND
-HV TERMINAL PINS ( 0.46)
BBL-TYPE, SAMTEC
DY12 OUTPUT
TERMINAL PINS ( 0.46)
BBL-102, SAMTEC
ANODE OUTPUTS (P9 to P16) P9 P10 P11 P12 P13 P14 P15 P16
TERMINAL PINS ( 0.46)
GND GND GND GND GND GND GND GND
BDL-108, SAMTEC
X
Figure 8: Internal Circuit
TERMINAL PINS (BDL-108, SAMTEC)
P1
P2
P8
K
P9
F
DY1 DY2 DY3 DY4 DY5 DY6 DY7 DY8 DY9 DY10 DY11 DY12
ANODE1 OUTPUT
GND
ANODE2 OUTPUT
GND
ANODE8 OUTPUT
GND
Normal Divider Type
TERMINAL PINS (BDL-108, SAMTEC)
P15
P16
ANODE9 OUTPUT
GND
ANODE15 OUTPUT
GND
ANODE16 OUTPUT
GND
Tapered Divider Type
R1 to R3, R13 : 360 kΩ
R4 to R11 : 150 kΩ
R12 : 180 kΩ
R14 : 1 MΩ
R15 to R17 : 51 Ω
R18 : 10 kΩ
C1 to C4 : 0.01 µF
R1 to R3 : 360 kΩ
R4 to R13 : 180 kΩ
R14 : 1 MΩ
R15 to R17 : 51 Ω
R18 : 10 kΩ
C1 to C4 : 0.01 µF
DIVIDER CURRENT: 347 µA
at -1000 V (Max. INPUT VOLTAGE)
DIVIDER CURRENT: 355 µA
at -1000 V (Max. INPUT VOLTAGE)
C4
R14
R1
R2
R3
R4
R5
R6
R7
R8
R9
R10
R15
R11
R16
R12
R17
R13
C1
C2
C3
TERMINAL PINS (BBL-102, SAMTEC)
GND
DY12 OUTPUT
R18
TERMINAL PINS (BBL-TYPE, SAMTEC)
GND
-HV INPUT
TPMHA0497ED
Figure 9: Suitable Sockets (Unit: mm)
Supplied
SD-108-T-22 ×2 pcs
(for Anode Output Pins)
SS-102-T-22
(for GND, DY12 Pin)
2.54
7.62
2.54
2.54
2.54
7.62
3.18
2.54
1.32
0.51
2.54
2.54
1.83
5.08
0.76
5.08
2.54
20.32
ASP-24307-02
(for GND, -HV Pin)
2.54 (TYP.)
TACCA0263EA
TACCA0265EA
TACCA0266EA
WARNING ~ High Voltage ~
The product is operated at high voltage potential. Further, the metal housing of the product is connected to the photocathode
(potential) so that it becomes a high voltage potential when the product is operated at a negative high voltage (anode grounded).
Accordingly, extreme safety care must be taken for the electrical shock hazard to the operator or the damage to the other instruments.
* PATENT: USA: 5410211 and other(9), GBR: 551767 and other(9), DEU: 69209809 and other(9), FRA: 551767 and other(9), JPN: 3078905 and other(9)
HAMAMATSU PHOTONICS K.K.
www.hamamatsu.com
HAMAMATSU PHOTONICS K.K., Electron Tube Division
314-5, Shimokanzo, Iwata City, Shizuoka Pref., 438-0193, Japan, Telephone: (81)539/62-5248, Fax: (81)539/62-2205
U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P. O. Box 6910, Bridgewater. N.J. 08807-0910, U.S.A., Telephone: (1)908-231-0960, Fax: (1)908-231-1218 E-mail: [email protected]
Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49)8152-375-0, Fax: (49)8152-2658 E-mail: [email protected]
France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: (33)1 69 53 71 00, Fax: (33)1 69 53 71 10 E-mail: [email protected]
United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road Welwyn Garden City Hertfordshire AL7 1BW, United Kingdom, Telephone: 44-(0)1707-294888, Fax: 44(0)1707-325777 E-mail: [email protected]
North Europe: Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171-41 SOLNA, Sweden, Telephone: (46)8-509-031-00, Fax: (46)8-509-031-01 E-mail: [email protected]
Italy: Hamamatsu Photonics Italia: S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39)02-935 81 733, Fax: (39)02-935 81 741 E-mail: [email protected]
TPMH1320E01
NOV. 2010 IP
Similar pages