PhotoMOS RELAYS HS (High Sensitivity) Type [1-Channel (Form A) Type] FEATURES 1. High sensitivity type LED operate current: typical 0.31 mA 2. Low-level off state leakage current (Typical 1 µA at 400 V load voltage) 3. Eliminates the need for a power supply to drive the power MOSFET 4. Low thermal electromotive force (Approx. 1 µV) 5. Extremely low closed-circuit offset voltages to enable control of small analog signals without distortion 6. Eliminates the need for a counter electromotive force protection diode in the drive circuits on the input side 6.4±0.05 .252±.002 8.8±0.05 .346±.002 3.9±0.2 .154±.008 6.4±0.05 .252±.002 8.8±0.05 .346±.002 3.6±0.2 .142±.008 mm inch 1 6 2 5 3 4 7. Stable on resistance to help simplify circuit design 8. Surface-mount model available TYPICAL APPLICATIONS 1. High-speed inspection machines • Scanner • IC checker • Board tester 2. Telephone and data communication equipment TYPES Part No. Output rating* Type AC/DC type Load voltage Load current 400 V 120 mA Through hole terminal Tape and reel packing style Picked from the Picked from the 1/2/3-pin side 4/5/6-pin side Tube packing style AQV234 Packing quantity Surface-mount terminal AQV234A AQV234AX AQV234AZ Tube Tape and reel 1 tube contains 50 pcs. 1 batch contains 500 pcs. 1,000 pcs. *Indicate the peak AC and DC values. Note: For space reasons, the package type indicator "X" and "Z" are omitted from the seal. RATING 1. Absolute maximum ratings (Ambient temperature: 25°C 77°F) Item Input LED forward current LED reverse voltage Peak forward current Power dissipation Load voltage (Peak AC) Continuous load current Output Type of Symbol connection IF VR IFP Pin VL A IL B C AQV234(A) 50 mA 3V 1A 75 mW 400 V 0.12 A 0.13 A 0.15 A Peak load current Ipeak 0.3 A Power dissipation Total power dissipation I/O isolation voltage Operating Temperature limits Storage Pout PT Viso Topr Tstg 500 mW 550 mW 1,500 V AC –40°C to +85°C –40°F to +185°F –40°C to +100°C –40°F to +212°F Remarks f = 100 Hz, Duty factor = 0.1% A connection: Peak AC, DC B, C connection: DC A connection: 100 ms (1 shot), VL = DC Non-condensing at low temperature 189 AQV234 2. Electrical characteristics (Ambient temperature: 25°C 77°F) Type of Symbol connection Item Typical Maximum Minimum Typical Typical Maximum LED operate current Input LED turn off current LED dropout voltage AQV234(A) 0.31 mA 0.5 mA 0.1 mA 0.29 mA 1.1 V (1.25 V at IF = 50 mA) 1.5 V — IFoff — VF — Ron A Ron B Ron C — — 1 µA Ton — 0.89 ms 2 ms IF = 2 mA IL = 120 mA Toff — 0.22 ms 1 ms IF = 2 mA IL = 120 mA Ciso — Riso — 30 Ω 22.5 Ω Typical 11.3 Ω Typical Off state leakage current Turn on time* Switching speed Turn off time* Transistor characteristics I/O capacitance Initial I/O isolation resistance Maximum Typical Maximum Typical Maximum Typical Maximum Minimum IF = 2 mA IL = 120 mA Within 1 s on time IF = 0 VL = 400 V 12.5 Ω Maximum IF = 2 mA IF = 2 mA IL = 120 mA Within 1 s on time 25 Ω Maximum ∆IF/∆t Q Min. 100 µA/s IL = 120 mA IF = 2 mA IL = 120 mA Within 1 s on time 50 Ω Maximum Output ∆IF/∆t Q Min. 100 µA/s IL = 120 mA IFon Typical On resistance Remarks 0.8 pF 1.5 pF 1,000 MΩ f = 1 MHz VB = 0 500 V DC Note: Recommendable LED forward current IF = 2mA. For type of connection, see Page 31. *Turn on/Turn off time Input 90% Output 10% Ton Toff ■ For Dimensions, see Page 27. ■ For Schematic and Wiring Diagrams, see Page 31. ■ For Cautions for Use, see Page 36. REFERENCE DATA 1. Load current vs. ambient temperature characteristics 2. On resistance vs. ambient temperature characteristics 3. Turn on time vs. ambient temperature characteristics Allowable ambient temperature: –40°C to +85°C –40°F to +185°F Type of connection: A Measured portion: between terminals 4 and 6; LED current: 2 mA; Load voltage: 400 V (DC); Continuous load current: 120 mA (DC) LED current: 2 mA; Load voltage: 400 V (DC); Continuous load current: 120 mA (DC) 50 100 80 60 2.5 Turn on time, ms On resistance, Ω Load current, mA 120 40 30 0 –40 –20 190 0 20 40 60 8085 Ambient temperature, °C 1.5 20 1.0 10 0.5 40 20 2.0 0 –40 –20 0 20 40 60 8085 Ambient temperature, °C 0 –40 –20 0 20 40 60 8085 Ambient temperature °C AQV234 6. LED turn off current vs. ambient temperature characteristics LED current: 2 mA; Load voltage: 400 V (DC); Continuous load current: 120 mA (DC) Load voltage: 400 V (DC); Continuous load current: 120 mA (DC) Load voltage: 400 V (DC); Continuous load current: 120 mA (DC) 0.8 0.6 0.4 0.2 0 1.0 0.8 0.6 0.4 0.2 –40 –20 0 0 20 40 60 8085 Ambient temperature °C –40 –20 Measured portion: between terminals 4 and 6; Ambient temperature: 25°C 77°F Current, mA LED current: 2 to 50 mA LED dropout, voltage, V 8. Voltage vs. current characteristics of output at MOS portion 1 2 3 4 5 –20 Voltage, V –40 1.1 –60 –80 –100 1.0 –40 –20 0.6 0.4 0 20 40 60 8085 Ambient temperature °C 9. Off state leakage current Measured portion: between terminals 4 and 6; Ambient temperature: 25°C 77°F 10–3 10–6 10–9 10–12 0 –120 0 20 40 60 8085 Ambient temperature °C –40 –20 120 100 80 60 40 20 –5 –4 –3 –2 –1 50mA 30mA 1.3 20mA 10mA 5mA 1.2 2mA 0.8 0 0 20 40 60 8085 Ambient temperature °C 7. LED dropout voltage vs. ambient temperature characteristics 1.4 1.0 0.2 Off state leakage current, A Turn off time, ms 1.0 LED turn off current, mA 5. LED operate current vs. ambient temperature characteristics LED operate current, mA 4. Turn off time vs. ambient temperature characteristics 20 40 60 80 Load voltage, V 100 10. LED forward current vs. turn on time characteristics 11. LED forward current vs. turn off time characteristics 12. Applied voltage vs. output capacitance characteristics Measured portion: between terminals 4 and 6; Load voltage: 400 V (DC); Continuous load current: 120 mA (DC); Ambient temperature: 25°C 77°F Measured portion: between terminals 4 and 6; Load voltage: 400 V (DC); Continuous load current: 120 mA (DC); Ambient temperature: 25°C 77°F Measured portion: between terminals 4 and 6; Frequency: 1 MHz; Ambient temperature: 25°C 77°F 3.0 1.5 1.0 0.5 5/7/2001 Output off time, ms 2.0 0 50 0.5 Turn off time, ms Turn on time, ms 2.5 0.4 0.3 0.2 20 30 40 50 LED forward current, mA 0 30 20 10 0.1 10 40 10 20 30 40 50 LED forward current, mA 0 10 20 30 40 50 Applied voltage, V All Rights Reserved, © Copyright Matsushita Electric Works, 191 Ltd. Go To Online Catalog