J102 RoHS Compliant E197851 15.5 x 10.5 x 11.25 mm Features atures • • • • • High sensitivity Super light weight Low coil power consumption PC board mounting Ideal for high density mounting Contact Data* Contact Arrangement 1A = SPST N.O. Contact Rating 1B = SPST N.C. AgNi 1C = SPDT 3A & 5A @125VAC, general use, 20k cycles for N.O., 10k cycles for N.C. 3A & 5A @ 30VDC, resistive use, 50k cycles for N.O., 30k cycles for N.C. Contact Resistance < 50 milliohms initial Contact Material AgNi + Au, Ag + Au 1A & 3A @ 30VDC, resistive use Maximum Switching Power 150W Pilot Duty 270VA, 120VAC, N.O., 30k cycles Ag Maximum Switching Voltage 300VAC, 150VDC 1A & 3A @125VAC, general use Pilot Duty 270VA, 120VAC, N.C., 6k cycles Maximum Switching Current 5A Coil Data* Coil Voltage VDC Coil Resistance Ω +/- 10% Pick Up Voltage VDC (max) Release Voltage VDC (min) 75% of rated voltage 10% of rated voltage Rated Max .20W .36W .45W 3 3.9 45 25 20 2.25 .3 5 6.5 125 75 56 3.75 .5 6 7.8 180 100 800 4.50 .6 9 11.7 405 225 180 6.75 .9 12 15.6 720 400 320 9.00 1.2 24 31.2 2880 1600 1280 18.00 2.4 Coil Power W Operate Time ms Release Time ms .20 .36 .45 5 5 General Data* Electrical Life @ rated load 100K cycles, average Mechanical Life 10M cycles, average Insulation Resistance 100M Ω min. @ 500VDC initial Dielectric Strength, Coil to Contact 1250V rms min. @ sea level initial Contact to Contact * Values can change due to the switching frequency, desired reliability levels, environmental conditions and in-rush load levels. It is recommended to test actual load conditions for the application. It is the user’s responsibility to determine the performance suitability for their specific application. The use of any coil voltage less than the rated coil voltage may compromise the operation of the relay. 500V rms min. @ sea level initial Shock Resistance 100m/s2 for 11 ms Vibration Resistance 1.50mm double amplitude 10~40Hz Terminal (Copper Alloy) Strength 5N Operating Temperature -40oC to +85oC Storage Temperature -40oC to +155oC Solderability 260oC for 5 s Weight 3.5g www.citrelay.com phone - 763.535.2339 Dimensions shown in mm. Dimensions are shown for reference purposes only. fax - 763.535.2194 page 1 Specifications and availability subject to change without notice. J102 Ordering Information 1. Series J102 1C S 3 12VDC .45 J102 J102K 2. Contact Arrangement 1A = SPST N.O. 1B = SPST N.C. 1C = SPDT 3. Sealing Options S = Sealed 4. Contact Options 1 = 1amp Ag (requires .2, .36 or .45 watt coil) 3 = 3amp AgNi (requires .2, .36 or .45 watt coil) 3P = 3amp Ag (requires .2, .36 or .45 watt coil) 5 = 5amp AgNi (requires .45 watt coil) 5. Coil Voltage 3VDC 5VDC 6VDC 9VDC 12VDC 24VDC 6. Coil Power .20 = .20W .36 = .36W .45 = .45W Dimensions Units = mm 15.54 [.61] 10.58 [.42] 11.60 [.46] 3.45 TYP [.14] page 2 www.citrelay.com 10.16 [.40] 2.54 [.10] phone - 763.535.2339 Dimensions shown in mm. Dimensions are shown for reference purposes only. 7.62 [.30] fax - 763.535.2194 Specifications and availability subject to change without notice. J102 Schematics & PC Layouts Bottom Views J102 10.16 [.40] 2.54 [.10] 7.62 [.30] (6X) Ø1.00 [.04] 1A 1B 1C J102K 10.16 [.40] 7.62 [.30] 1A 1B www.citrelay.com 2.54 [.10] (5X) Ø1.00 [.04] 1C phone - 763.535.2339 Dimensions shown in mm. Dimensions are shown for reference purposes only. fax - 763.535.2194 page 1 Specifications and availability subject to change without notice.