2.0X1.25mm SMD CHIP LED LAMP APTK2012TGC GREEN Features Description !2.0mmX1.25mm SMT LED, 0.75mm THICKNESS. The Green source color devices are made with !LOW InGaN on SiC Light Emitting Diode. POWER CONSUMPTION. ! WIDE ! IDEAL VIEWING ANGLE. FOR BACKLIGHT AND INDICATOR. ! VARIOUS COLORS AND LENS TYPES AVAILABLE. !PACKAGE : 2000PCS / REEL. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAD1123 APPROVED : J. Lu REV NO: V.1 CHECKED :Allen Liu DATE:MAR/23/2003 DRAWN:D.L.HUANG PAGE: 1 OF 4 Selection Guide P ar t N o . Dic e APTK2012TGC Iv (m c d ) @ 20 m A L en s Ty p e GREEN(InGaN) WATER CLEAR V i ew i n g An g l e Min . Ty p . 2θ1/2 70 150 100° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at T)=25°°C Sy m b o l Par am et er D ev i c e λpeak Peak Wavelength Green λD Dominate Wavelength ∆λ1/2 Ty p . Max . Un it s Tes t Co n d it io n s 500 nm IF = 2 0 m A Green 505 nm IF = 2 0 m A Spectral Line Half-width Green 30 nm IF = 2 0 m A C Capacitance Green 56 pF V F = 0 V; f = 1 M Hz VF Forward Voltage Green 3.6 4.4 V IF = 2 0 m A IR Reverse Current Green 10 uA VR = 5V Absolute Maximum Ratings at T)=25°°C Gr een Un it s Power dissipation 110 mW DC Forward Current 30 mA Peak Forward Current [1] 150 mA Reverse Voltage 5 V Operating/Storage Temperature -40°C To +85°C P ar am e t e r Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAD1123 APPROVED : J. Lu REV NO: V.1 CHECKED :Allen Liu DATE:MAR/23/2003 DRAWN:D.L.HUANG PAGE: 2 OF 4 Green APTK2012TGC SPEC NO: DSAD1123 APPROVED : J. Lu REV NO: V.1 CHECKED :Allen Liu DATE:MAR/23/2003 DRAWN:D.L.HUANG PAGE: 3 OF 4 APTK2012TGC SMT Reflow Soldering Instructions Number of reflow process shall be less than 2 times and cooling process to normal temperature is required between first and second soldering process. Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) SPEC NO: DSAD1123 APPROVED : J. Lu REV NO: V.1 CHECKED :Allen Liu DATE:MAR/23/2003 DRAWN:D.L.HUANG PAGE: 4 OF 4