Proven Reliabilit y G SERIES ISOLATED, PROPORTIONAL DC TO HV DC CONVERTERS 100V to 6kV at 1.5W PRODUCT SELECTION TABLE PRODUCT PRODUCTDESCRIPTION DESCRIPTION The G Series is a line of miniature, versatile component level building blocks that provide up to 6kV, positive or negative, in a compact PC mount package. The isolated output is directly proportional to the input, and is linear from approximately 0.7 volts in. Excellent filtering techniques and a low noise quasi-sinewave oscillator provide clean, reliable DC to HV DC conversion with low ripple and low EMI/RFI. The isolated output allows for user selectable output polarity. A dual output option with center-tap pin which, when grounded provides both positive and negative outputs from one compact, low cost module. The pin pattern on the G Series allows for a direct drop-in replacement for many larger high voltage modules. The GPMT model has been specifically designed for biasing PMT’s. Typical Input vs. Output Voltages 100 90 % Of Full Output 80 MODEL OUTPUT VOLTAGE*2 OUTPUT CURRENT*1 G01 100V 15mA G02 200V 7.5mA G03 300V 5mA G04 400V 3.75mA G05 500V 3mA G06 600V 2.5mA G10 1kV 1.5mA G12 1.2kV 1.25mA G15 1.5kV 1.0mA G20 2kV 0.75mA G25 2.5kV 0.60mA G30 3kV 0.50mA G40 *8 4kV 0.37mA G50 *8 5kV 0.30mA G60 *8 6kV 0.25mA 1.25kV 350uA GPMT 70 60 *7 50 40 30 20 10 0 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 FEATURES Input Voltage APPLICATIONS • Capacitor Charging • Piezo Devices • Mass Spectrometry • Electrostatic Chuck • Igniter / Spark Module • Sustaining Ion Pumps • Piezo Devices • Vacuum Gauges • Photomultiplier Tubes • Lamp Ignition and Drive • Proportional Input/Output • Compact, PCB Mount Package • Low Ripple, Low EMI / RFI • Proven Reliability • Short Circuit Protection • Input/Output Isolation • Low Leakage Current • Low Input/Output Coupling Capacitance • No External Components Required • No Minimum Load Required • MTBF: >2.29 Million Hours per Bellcore TR-332 • RoHS Compliant OPTIONS • Dual output (Center Tap) Models Available (CT Suffix) • External Mounting Enclosure (AB Suffix) • Alternate Input/Output Combinations (Consult Factory) WWW.XPPOWER.COM 4726BH01 PAGE 1 G SERIES *3 ELECTRICAL SPECIFICATIONS REVERSIBLE MODEL OUTPUT VOLTAGE*2 DUAL OUTPUT (CENTER TAP) MODEL*4 OUTPUT VOLTAGE*2 OUTPUT CURRENT*1 INPUT CURRENT (NO LOAD) INPUT CURRENT (FULL LOAD) RIPPLE*5 G01 0 to 100V G01CT 0 to +/- 50V 15mA <100mA <250mA <1.75% G02 0 to 200V G02CT 0 to +/- 100V 7.5mA <100mA <250mA <0.75% G03 0 to 300V G03CT 0 to +/- 150V 5mA <100mA <250mA <0.75% G04 0 to 400V G04CT 0 to +/- 200V 3.75mA <100mA <250mA <0.75% G05 0 to 500V G05CT 0 to +/- 250V 3mA <100mA <250mA <0.1% G06 0 to 600V G06CT 0 to +/- 300V 2.5mA <100mA <250mA <0.1% G10 0 to 1kV G10CT 0 to +/- 500V 1.5mA <100mA <250mA <0.1% G12 0 to 1.2kV G12CT 0 to +/- 600V 1.25mA <150mA <275mA <0.1% G15 0 to 1.5kV G15CT 0 to +/- 750V 1.0mA <125mA <275mA <0.5% G20 0 to 2kV G20CT 0 to +/- 1kV 0.75mA <165mA <275mA <0.5% G25 0 to 2.5kV G25CT 0 to +/- 1.25kV 0.60mA <125mA <275mA <1.0% G30 0 to 3kV G30CT 0 to +/- 1.5kV 0.50mA <125mA <300mA <2.0% G40 0 to 4kV G40CT 0 to +/- 2kV 0.37mA <125mA <300mA <1.0% G50 0 to 5kV G50CT 0 to +/- 2.5kV 0.30mA <125mA <300mA <2.0% G60 0 to 6kV G60CT 0 to +/- 3kV 0.25mA <125mA <300mA <2.0% GPMT 0 to 1.25kV — — 350uA <35mA <75mA <0.05% WWW.XPPOWER.COM 4726BH01 PAGE 2 G SERIES *3 ELECTRICAL SPECIFICATIONS PARAMETER VALUE INPUT VOLTAGE 0 to 12VDC TURN-ON VOLTAGE <0.7VDC ISOLATION < +/-3.5kV BIAS INPUT CAPACITANCE 120µF <15ms (G01 thru G60 Models) RESPONSE TIME <40ms (GMPT Models) OUTPUT VOLTAGE TOLERANCE +/-3% (Full Load, 100% output voltage) REGULATION <10% VARIATION OVER LOAD RANGE FREQUENCY 125kHz +/- 65kHz OPERATING TEMPERATURE*6 -10C to +60°C (CASE) STORAGE TEMPERATURE -25C to +90°C WWW.XPPOWER.COM 4726BH01 PAGE 3 G SERIES G01 THRU G40, GPMT MECHANICAL SPECIFICATIONS TOP VIEW RECOMMENDED PCB LAYOUT HIGH VOLTAGE TOP VIEW 1.50 (38.10) 0.15 (3.81) 1.50 (38.10) 0.800 (20.32) 0.20 (5.08) 0.63 (16.00) 1.200 (30.48) 2 4 1 3 1.000 (25.40) 0.25 (6.35) 0.35 (8.89) RECOMMENDED HOLE & PAD O.D. SIZE: Ø 0.052 (1.32 ) & Ø 0.082 (2.08 ) 4 PLACES 00.031 Ø PC PIN (0.79) 4 PLACES DIMENSIONS ARE IN INCHES (METRIC EQUIVALENTS ARE IN PARENTHESIS) DIMENSIONAL TOLERANCES: .XX = +- 0.02 (0.51), .XXX = +- 0.005 ( 0.127) PARAMETER VALUE PIN # FUNCTION WEIGHT Weight: 1.5 OZ (43 Grams) 1 (+) Input VOLUME 1.4 cubic Inches (23 cubic centimeters) 2 (-) Input DIMENSIONS 1.5L (38.1L) x 1.5W (38.1L) x 0.63H (16.0H) 3 (+) Output CASE MATERIAL Diallyl Phthalate (DAP) 4 (-) Output WWW.XPPOWER.COM 4726BH01 PAGE 4 G SERIES G50 THRU G60 MECHANICAL SPECIFICATIONS TOP VIEW RECOMMENDED PCB LAYOUT HIGH VOLTAGE TOP VIEW 1.50 (38.10) 0.15 (3.81) 0.800 (20.32) 1.50 (38.10) 0.20 (5.08) 0.63 (16.00) 1.200 (30.48) 4 2 1.200 (30.48) 1 3 0.15 (3.81) 0.35 (8.89) RECOMMENDED HOLE & PAD O.D. SIZE: Ø 0.052 (1.32 ) & Ø 0.082 (2.08 ) 4 PLACES 0.031 Ø PC PIN (0.79) 4 PLACES DIMENSIONS ARE IN INCHES (METRIC EQUIVALENTS ARE IN PARENTHESIS) DIMENSIONAL TOLERANCES: .XX = +- 0.02 (0.51), .XXX = +- 0.005 ( 0.127) PARAMETER VALUE PIN # FUNCTION WEIGHT Weight: 1.5 OZ (43 Grams) 1 (+) Input VOLUME 1.4 cubic Inches (23 cubic centimeters) 2 (-) Input DIMENSIONS 1.5L (38.1L) x 1.5W (38.1L) x 0.63H (16.0H) 3 (+) Output CASE MATERIAL Diallyl Phthalate (DAP) 4 (-) Output WWW.XPPOWER.COM 4726BH01 PAGE 5 G SERIES G01CT THRU G20CT MECHANICAL SPECIFICATIONS TOP VIEW RECOMMENDED PCB LAYOUT HIGH VOLTAGE TOP VIEW 1.50 (38.10) 1.200 (30.48) 0.15 (3.81) 4 2 0.800 (20.32) 1.50 (38.10) 0.20 (5.08) 0.63 (16.00) 1 0.35 (8.89) 5 0.50 (12.70) 3 1.000 (25.40) 0.25 (6.35) RECOMMENDED HOLE & PAD O.D. SIZE: Ø 0.052 (1.32 ) & Ø 0.082 (2.08 ) 5 PLACES 0.031 Ø PC PIN (0.79) 5 PLACES DIMENSIONS ARE IN INCHES (METRIC EQUIVALENTS ARE IN PARENTHESIS) DIMENSIONAL TOLERANCES: .XX = +- 0.02 (0.51), .XXX = +- 0.005 ( 0.127) PARAMETER VALUE PIN/WIRE # FUNCTION WEIGHT Weight: 1.5 OZ (43 Grams) 1 (+) Input VOLUME 1.4 cubic Inches (23 cubic centimeters) 2 (-) Input DIMENSIONS 1.5L (38.1L) x 1.5W (38.1L) x 0.63H (16.0H) 3 (+) Output CASE MATERIAL Diallyl Phthalate (DAP) 4 (-) Output 5 Dual Output/Center Tap WWW.XPPOWER.COM 4726BH01 PAGE 6 G SERIES G25CT THRU G60CT MECHANICAL SPECIFICATIONS TOP VIEW RECOMMENDED PCB LAYOUT HIGH VOLTAGE TOP VIEW 1.50 (38.10) 0.15 (3.81) 2 0.800 (20.32) 1.50 (38.10) 0.20 (5.08) 0.63 (16.00) 0.031 Ø PC PIN (0.79) 5 PLACES 1.200 (30.48) 1 4 5 0.60 (15.24) 3 1.200 (30.48) 0.15 (3.81) 0.35 (8.89) RECOMMENDED HOLE & PAD O.D. SIZE: Ø 0.052 (1.32 ) & Ø 0.082 (2.08 ) 5 PLACES DIMENSIONS ARE IN INCHES (METRIC EQUIVALENTS ARE IN PARENTHESIS) DIMENSIONAL TOLERANCES: .XX = +- 0.02 (0.51), .XXX = +- 0.005 ( 0.127) PARAMETER VALUE PIN/WIRE # FUNCTION WEIGHT Weight: 1.5 OZ (43 Grams) 1 (+) Input VOLUME 1.4 cubic Inches (23 cubic centimeters) 2 (-) Input DIMENSIONS 1.5L (38.1L) x 1.5W (38.1L) x 0.63H (16.0H) 3 (+) Output CASE MATERIAL Diallyl Phthalate (DAP) 4 (-) Output 5 Dual Output/Center Tap WWW.XPPOWER.COM 4726BH01 PAGE 7 G SERIES – ACCESSORY EXTERNAL EMI/RFI SHIELD 4-40 SOLDERABLE GROUNDING STUD 2 PLACES 2.40 (60.96) 0.300 (7.62) 0.140 (3.56) THRU 2 PLACES Ø 0.300 (7.62) 0.80 (20.32) 2.000 (50.80) 1.60 (40.64) 0.20 (5.08) 1.60 (40.64) 0.31 (7.87) HIGH VOLTAGE 0.68 (17.27) 0.40 (10.16) PARAMETER VALUE PARAMETER VALUE BOX SIZE See Table GROUND Black Anodized Aluminum MATERIAL 0.03 (0.76mm) Aluminum DIMENSIONS WITH TAB 2.4L (60.96) x 1.6W (40.64) x 0.68H (17.27) MOUNTING Two Tabs With Thru-Holes DIMENSIONS WITHOUT TAB 1.6L (40.64) x 1.6W (40.64) x 0.68H (17.27) SHIELD DESCRIPTION The “AB” Series provides low cost EMI/RFI shielding and rugged mounting for XP EMCO High Voltage DC to DC converters. These five-sided aluminum enclosures feature a durable, non-conductive black anodized finish. The enclosures are manufactured at our own sheet metal fabrication facility, which allows for low cost and stock delivery. Add an “AB” suffix to the model number for a factory-installed enclosure (e.g. E10AB). Contact our sales department by phone, fax or email for immediate attention. WWW.XPPOWER.COM APPLICATION INFORMATION On models with outputs of 3kV or higher, special care must be taken to ensure adequate spacing and insulation between the metal can and the high voltage output. Single sided layout, encapsulants or conformal coating may be required. Case grounding stud must be connected to ground. Case ground is not internally connected to (-) input. 4726BH01 PAGE 8 G SERIES APPLICATION NOTES V1= +2500V, +0.3mA INPUT- OUTPUT- G-CT-Series 8.33M DUAL OUTPUT-CENTER-TAP 8.33M OUTPUT+ R1 G50CT INPUT+ R2 12V V2 = -2500V, -0.3mA GND OUTPUT- 4.16M INPUT- 4.16M V3 = +2500V, +0.6mA OUTPUT+ R3 G25 INPUT+ R4 12V G-Series G25 INPUT+ OUTPUT+ INPUT- OUTPUT- V4 = -2500V, -0.6mA G-Series GND WWW.XPPOWER.COM 4726BH01 PAGE 9 G SERIES BLOCK DIAGRAM (+) Output (+) In Rectifier & Multiplier Oscillator (-) In Center tap (for Dual output option) (-) Output Transformer OPTION CODE TABLE OPTION POLARITY OPTIONS ORDER CODE MODELS Blank ALL Dual Output (center tap) option CT ALL Shielding and Mounting Enclosure AB ALL Positive / Negative reversible HOW TO ORDER PART NUMBER SELECTOR: Model Number: G10CTAB Model Output Voltage (See table) Center Tap (for dual output option) Shielding & Mounting Enclosure (Optional) EXAMPLE: G10CTAB (G-Model, 10-Output Voltage, CT-Center Tap, AB-Shielding & Mounting Enclosure) * Notes: 1. At maximum rated output voltage. 2. Output voltage is load dependent. Under light or no load conditions, reduce input voltage so maximum rated output voltage is not exceeded. 3. Specifications after 30 minute warm up, full load, at 25C unless otherwise indicated. 4. For dual output units [CT option], the negative output voltage will be ~20% larger than the positive output voltage with respect to the center tap pin. 5. Ripple Specifications for dual output units applies to the voltage between the positive and negative output terminals. 6. Proper thermal management techniques are required to maintain safe case temperature at maximum power output. 7. The GPMT is only 0.4375W. 8. Models G40, G50 & G60 do not have internal bleeder resistors on the output. Provisions must be made externally to discharge the output capacitors. XP EMCO reserves the right to make changes on products and literature, including specifications, without notice. XP EMCO standard product models are not recommended for “copy-exact” applications or any other application restricting product changes. “Copy-exact” options are available. Please contact an XP EMCO sales representative for more details. WWW.XPPOWER.COM 4726BH01 PAGE 10