ESMFxx 4-Line Transient Voltage Suppressor Array Description The Standard TVS are designed to low voltage, integrated circuits from transients caused by electrostatic discharge (ESD), electrical fast transients (EFT) and other induced voltages. Applications • Computer Notebooks • Communication Systems & Cellular Phones • Printers • Personal Digital Assistant(PDA) • Video Equipment Complies with the following standards IEC61000-4-2 Level 4 15 kV (air discharge) 8 kV(contact discharge) MIL STD 883E - Method 3015-7 Class 3 25 kV HBM (Human Body Model) Features • 100 W Peak Pulse Power per Line (tp=8/20μs) • Monolithic Structure • Available in 4 Voltage Types:5V to 24V • Low Clamping Voltage • ESD Protection > 40 kilovolts • Low Leakage Current • Protects up to Four (4) Bidirectional Lines and • Five(5) Unidirectional Lines • RoHS compliant package Packing Information Graphic symbol 3,000/Reel Publication Order Number: [ESMFxx] © Bruckewell Technology Corporation Rev. A -2014 ESMFxx 4-Line Transient Voltage Suppressor Array MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Absolute ratings @25°C Unless Otherwise Specified Symbol Parameter Value Unit 100 W PPP Peak Pulse Power (tp = 8/20μs) See Figure 1 TJ Operating Supply Voltage (pin-1,-2 to pin-3) -55 to +150 °C TSTG Storage Temperature Range -55 to +150 °C Electrical Characteristics Min. V VBR Typ. V ESMF3V3 5.3 ESMF05 ESMF12 Part Numbers Max. V Ir VRWM IR mA V uA C TYP PF 5.6 5.88 1 3.3 1 50 6.1 6.7 7.2 1 5 1 35 13.3 14.5 15 1 12 1 30 Publication Order Number: [ESMFxx] © Bruckewell Technology Corporation Rev. A -2014 ESMFxx 4-Line Transient Voltage Suppressor Array ■Typical Device Characteristics FIG.1-NON-REPETITIVE PEAK PULSE POWER VS. TIME FIG.2-POWER DERATING CURVE FIG.3-POWER WAVEFORM FIG.4-CLAMPING VOLTAGE VS. PEAK PULSE CURRENT Publication Order Number: [ESMFxx] © Bruckewell Technology Corporation Rev. A -2014 ESMFxx 4-Line Transient Voltage Suppressor Array Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Bruckewell Technology Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Bruckewell”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Bruckewell makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Bruckewell disclaims (i) Any and all liability arising out of the application or use of any product. (ii) Any and all liability, including without limitation special, consequential or incidental damages. (iii) Any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Bruckewell’s knowledge of typical requirements that are often placed on Bruckewell products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. Product specifications do not expand or otherwise modify Bruckewell’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Publication Order Number: [ESMFxx] © Bruckewell Technology Corporation Rev. A -2014