K Series Crystal ¾ Plastic SMD Package ¾ Wide Frequency Range ¾ RoHS Compliant Available ¾ Tape and Reel Packaging ESR CHART: ELECTRICAL SPECIFICATIONS: Frequency Range 3.500MHz to 70.000MHz ±50ppm / ±100ppm Standard (See Part Number Guide for Options) -10°C to +60°C -55°C to +125°C ±5ppm per year max 7pF Max 16pF Standard (See Part Number Guide for Options) See ESR Chart Fundamental or 3rd OT 50µW to 100µW 500 M ohms Min at 100VDC ±15VDC 1 x 10-2 mPa (m3/s) Max ±5ppm max (drop test onto a hard wooden board from 75cm) Frequency Tolerance/ Stability Operating Temperature Range Storage Temperature Aging Shunt Capacitance Load Capacitance Equivalent Series Resistance Mode of Operation Drive Level Insulation Resistance Hermeticity of Seal Shock Resistance Frequency Range ESR (Ohms) 200 Max 150 Max 100 Max 50 Max 100 Max 80 max 3.500MHz to 3.999MHz 4.000MHz to 5.999MHz 6.000MHz to 9.999MHz 10.000MHz to 30.000MHz 30.000MHz to 35.999MHz 36.000MHz to 70.000MHz Mode / Cut Fund / AT Fund / AT Fund / AT Fund / AT 3rd OT/AT 3rd OT/AT MARKING: Line 1: MXX.XXX XX.XXX = Frequency in MHz Line 2: SYMCCL S = Internal Code YM = Date Code (Year/Month) CC = Crystal Parameters Code L = Denotes RoHS Compliant MECHANICAL DETAILS: 12.50 [.492] MAX 4 3 4 3 1 2 4.60 [.181] MAX 1 7.60 [.299] 2 1.70 [.067] 9.40 [.370] 3.70 [.146] MAX 1.80 [.071] 1.00 [.039] 0.80 [.031] 1.80 [.071] Recommended Land Pattern Dimension in Brackets are in Inches MOISTURE SENSITIVITY LEVEL: Level Time 168 Hours 3 Floor Life Conditions ≤30ºC/60% R.H. Standard Time Conditions 192 +5/-0 Hours 30ºC/60% R.H. Accelerated Equivalent Time Conditions 40 +1/-0 Hours 60ºC/60% R.H. PART NUMBER GUIDE: Frequency K 12.5mm x 4.6mm Plastic 4 J Lead Load Capacitance RoHS Compliant Blank = Not Compliant F = Is Compliant S = Series 16 = 16pF (Standard) XX = XXpF (8pF to 50pF) Temperature Tolerance/Stability* A = ±50 ppm / ±100 ppm B = ±30 ppm / ±50 ppm E = ±50 ppm / ±50 ppm Operating Temperature Mode of Operation C = -40°C to +85°C D = -10°C to +60°C 1 = Fundamental 3 = 3rd Overtone Packaging Blank = Bulk T = Tape and Reel MMD Components, 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com [email protected] Specifications subject to change without notice Revision K08/27/07D