IPT0406-xxI IP Semiconductor Co., Ltd. High current density due to double mesa technology; SIPOS and Glass Passivation. IPT0406-xx series are suitable for general purpose AC Switching. They can be used as an ON/OFF function In application such as static relays, heating regulation, Induction motor stating circuits… or for phase Control operation light dimmers, motor speed Controllers. IPT0406-xx series is 3 Quadrants triacs, This is specially recommended for use on inductive Loads.. IPAK(TO-251) MAIN FEATURES Symbol Value Unit IT(RMS) 4 A VDRM / VRRM 600 V IGT 5 to 35 mA ABSOLUTE MAXIMUM RATINGS Parameter Storage Junction Temperature Range Operating Junction Temperature Range Symbol Value Unit Tstg Tj -40 to +150 -40 to +125 ℃ Repetitive Peak Off-state Voltage Repetitive Peak Reverse Voltage Tj = 25℃ VDRM VRRM 600 600 V Non Repetitive Peak Off-state Voltage Non Repetitive Peak Reverse Voltage Tj = 25℃ VDSM VRSM 700 700 V RMS on–state current (Full sine wave) Tc =105℃ IT(RMS) 4 A ITSM 38 35 A I²t 6 A²s dI / dt 50 A/us IGM 4 A PG(AV) 1 W Non repetitive surge peak on–state Current (full cycle, Tj = 25℃) I²t Value for fusing f = 60Hz t = 16.7ms f = 50 Hz t = 20ms tp = 10ms Critical Rate of rise of on-state current IG = 2xIGT, tr ≤ 100ns, f = 120Hz, Tj = 125 ℃ Peak gate current tp = 20us, Tj = 125 ℃ Average gate power dissipation Tj = 125 ℃ 4F, Cheong won B/D, 269 Hyoje-dong, Jongno-gu, Seoul, 110-480 Korea TEL : +82-70 - 7574 - 2839, Fax : +82-2-6280-6382, [email protected] 1 IPT0406-xxI ELECTRICAL CHARACTERISTICS (Tj = 25 ℃ unless otherwise specified) IPT0406-xxI Symbol Test Condition Quadrant IGT VD = 12V RL = 33Ω VGT VD=VDRM, RL=3.3KΩ, VGD Tj = 125 ℃ 10 35 MAX 1.3 V I – II – III MIN 0.2 V 10 25 50 15 30 60 mA MAX mA IT = 500mA MAX 10 15 35 mA VD = 67% VDRM gate open Tj = 125 ℃ MIN 20 40 400 V/us 1.8 2.7 - 0.9 2.0 - - - 2.5 (dV/dt) c=0.1V/us Tj = 125 ℃ (dV/dt) c=10V/us Tj = 125 ℃ (dI/dt)c 5 Unit I – II – III II dV/dt 35 MAX IG = 1.2 IGT IH 10 I – II – III I – III IL 05 MIN Without snubber Tj = 125 ℃ A/ms STATIC CHARACTERISTICS Symbol Test Conditions Value (MAX) Unit VTM ITM = 5.5A, t p = 380uS Tj = 25 ℃ 1.6 V IDRM VD = VDRM Tj = 25 ℃ 5 uA IRRM VR = VRRM Tj = 125 ℃ 1 mA THERMAL RESISTANCES Symbol Parameter Value Unit Rth (j – c) Junction to case (AC) 2.6 ℃/W 4F, Cheong won B/D, 269 Hyoje-dong, Jongno-gu, Seoul, 110-480 Korea TEL : +82-70 - 7574 - 2839, Fax : +82-2-6280-6382, [email protected] 2 IPT0406-xxI PACKAGE MECHANICAL DATA TO-251(IPAK) Dimensions Ref Millimeters Min Typ Inches Max Min Typ Max A 2.2 2.4 0.086 0.095 A2 0.9 1.1 0.035 0.043 B 0.55 0.65 0.021 0.026 B2 5.1 5.4 0.200 0.212 B3 0.76 0.85 0.030 0.033 B4 0.32 0.013 C 0.45 0.62 0.017 0.024 C2 0.48 0.62 0.019 0.024 D 6 6.2 0.236 0.244 E 6.4 6.7 0.252 0.264 G 4.4 4.7 0.173 0.185 H 16 16.7 0.630 0.658 L 8.9 9.4 0.35 0.37 L1 1.8 1.9 0.071 0.075 L2 1.37 1.5 0.054 0.059 V1 4º 4º 4F, Cheong won B/D, 269 Hyoje-dong, Jongno-gu, Seoul, 110-480 Korea Tel : +82-70-7574-2839, Fax : +82-2-6280-6382, [email protected] 3 IPT0406-xxI IPT406-xxI 4F, Cheong won B/D, 269 Hyoje-dong, Jongno-gu, Seoul, 110-480 Korea TEL : +82-70 - 7574 - 2839, Fax : +82-2-6280-6382, [email protected] 4