EBSS220 200V 2.0 Amp Schottky Barrier Bridge Rectifiers Elektronische Bauelemente RoHS Compliant Product A suffix of “-C” specifies halogen & lead-free FEATURES EBS Ideal for printed circuit board Lead tin plated copper Reliable low cost construction utilizing molded plastic technique results in inexpensive product MECHANICAL DATA Polarity:Symbol molded on body Mounting position :Any PACKAGE INFORMATION Package MPQ Leader Size EBS 5K 13 inch REF. A B C D Millimeter Min. Max. 4.9 5.1 6.0 6.4 3.9 4.1 3.2 3.5 REF. E F G H Millimeter Min. Max. 0.6 0.7 5.3 5.5 1.15 1.27 0.15 0.25 MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (Rating 25°C ambient temperature unless otherwise specified. Single phase half wave, 60Hz, resistive or inductive load. For capacitive load, de-rate current by 20%.) Parameter Symbol Part Number Unit Maximum Recurrent Peak Reverse Voltage VRRM 200 V Maximum RMS Bridge Input Voltage VRMS 140 V Maximum DC Blocking Voltage VDC 200 V IF 2 A IFSM 50 A VF 0.9 V Maximum Average Forward Rectified Output Peak Forward Surge Current 8.3 ms Single Half Sine-Wave Super Imposed on Rated Load (JEDEC Method) Maximum Forward Voltage @ 2A Maximum DC Reverse Current at Rated DC Blocking Voltage Typical Junction Capacitance TC=25°C TC=100°C 1 IR 0.2 mA 5 CJ 35 pF Typical Thermal Resistance 2 RθJA 100 °C / W Typical Thermal Resistance 2 RθJC 50 °C / W TJ,TSTG -55~150 °C Operating and Storage temperature range Note: 1. Measured at 1.0MHZ and applied reverse voltage of 4.0V DC 2. Device mounted on FR 4 substrate, 1’’ *1’’ , 2oz, single sided, PC boards with 0.1’’* 0.15’’ copper pad. http://www.SeCoSGmbH.com/ 03-Nov-2014 Rev. A Any changes of specification will not be informed individually. Page 1 of 2 EBSS220 Elektronische Bauelemente 200V 2.0 Amp Schottky Barrier Bridge Rectifiers RATINGS AND CHARACTERISTIC CURVES http://www.SeCoSGmbH.com/ 03-Nov-2014 Rev. A Any changes of specification will not be informed individually. Page 2 of 2