LB2S-LB10S SINGLE-PHASE SURFACE MOUNT BRIDGE RECTIFIER ￣ ￣ ＋ VOLTAGE RANGE: 200 - 1000V CURRENT: 1.0 A Features D Low Profile: Typical height of 1.4mm D Ideal for automated placement D High surge current capability SOPA-4 - － Mechanical Data D Case:SOPA-4 D Epoxy meets UL-94V-0 Flammability rating D Terminals:Matte tin plated ldads, solderable per D J-STD-002B and JESD22-B102D D Polarity:As markde on body Maximum Ratings and Electrical Characteristics TA = 25C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Symbol LB2S LB4S LB6S LB8S LB10S Unit Maximum repetitive peak reverse voltage VRRM 200 400 600 800 1000 V Maximum RMS voltage VRMS 140 280 420 560 800 V Maximum DC blocking voltage VDC 200 400 600 800 1000 V Maximum Average forward output rectified current on glass-eposy P.C.B IF(AV) 1.0 on aluminum substrate A 0.8 Peak forward surge current 8.3 ms single sine-wave superimposed on rated load (JEDEC Method) IFSM 30 A Rating for fusig (t\<8.3ms) I2 t 3 A2sec Maximum instantaneous forward voltage drop per diode at 0.4A VF 0.95 V Maximum DC reverse current atTA=25 ℃ rated DC blocking voltage per legTA=125℃ IR 5 µA Typical thermal resistance per leg (Note 1) 500 RθJA 80 RθJL 25 ℃/W Operating junction temperature range TJ -55 to +150 ℃ Storage temperature range TSTG -55 to +150 ℃ Notes:1. Device mounted P.C.B with 0.47x0.47''(12mmx12mm) Copper Pads. 2. JEDEC registered values 1 of 2 www.sunmate.tw (TA=25℃ unless ontherwise noted) 2 of 2 www.sunmate.tw