Aluminum Electrolytic Capacitors (Radial Lead Type) Radial Lead Type Series : FC Type : A Features ● Endurance : 105 °C 1000 h to 5000 h impedance ● RoHS compliant ● Low Specifications Category temperature range Rated voltage range Capacitance range Capacitance tolerance Leakage current Dissipation factor (tan d) Endurance –55 °C to +105 °C 6.3 V.DC to 100 V.DC 2.2 µF to 15000 µF ±20 % (120 Hz/+20 °C) I < 0.01 CV or 3 (µA) After 2 minutes (Whichever is greater) V.DC tan d 6.3 10 16 25 35 50 63 100 0.22 0.19 0.16 0.14 0.12 0.10 0.08 0.07 (120 Hz/+20 °C) For capacitance value > 1000 µF, add 0.02 per every 1000 µF. After following life test with DC voltage and +105 °C±2 °C ripple current value applied (The sum of DC and ripple peak voltage shall not exceed the rated working voltage) when the capacitors are restored to 20 °C, the capacitors shall meet the limits specified bellow. Duration : 04 to 06.3 : 1000 hours, 08 : 2000 hours , 010 : 3000 hours , 012.5 to 018 : 5000 hours Capacitance change Within ±20 % of the initial value tan d < 200 % of the initial limit DC leakage current Within the initial limit Shelf life After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) AEC-Q200 AEC-Q200 compliant Frequency correction factor for ripple current Rated voltage (V.DC) Capacitance (µF) 2.2 390 1200 2700 6.3 to 100 60 0.55 0.70 0.75 0.80 to 330 to 1000 to 2200 to 15000 120 0.65 0.75 0.80 0.85 Frequency (Hz) 1k 0.85 0.90 0.90 0.95 10 k 0.90 0.95 0.95 1.00 100 k 1.00 1.00 1.00 1.00 fd±0.05 Dimensions Sleeve Pressure relief 06.3 < < 08 010 < + L✽ 14 min. 0D±0.5 3 min. F±0.5 – 0D±0.5 ✽ L < 16 : L±1.0 (✽08×15, 016×15, 018×15 : L±1.5) L > 20 : L±2.0 0D L 0d F 4 5 6.3 8 L > 11 10 0.45 1.5 0.5 2.0 0.5 2.5 0.6 3.5 0.6 5.0 12.5 15 to 25 30 to 40 0.6 0.8 5.0 5.0 (Unit : mm) 16 18 4 L=7 5 6.3 0.8 7.5 0.8 7.5 0.45 1.5 0.45 2.0 0.45 2.5 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 08 Mar. 2016 Aluminum Electrolytic Capacitors (Radial Lead Type) Case size/ Impedance/ Ripple current Rated voltage (V.DC) Case size (mm) (0D×L) 6.3 V.DC to 35 V.DC 50 V.DC 100 V.DC Ripple Ripple Ripple Ripple Impedance Impedance Impedance current current current current (Ω)/(100 kHz) (Ω)/(100 kHz) (Ω)/(100 kHz) (mA r.m.s) (mA r.m.s) (mA r.m.s) (mA r.m.s) 20 °C –10 °C /(100 kHz) 20 °C –10 °C /(100 kHz) 20 °C –10 °C /(100 kHz) 20 °C –10 °C /(100 kHz) Impedance (Ω)/(100 kHz) 4 × 7 2.00 5.00 65 5 × 7 0.950 2.40 120 6.3 × 7 0.450 1.20 200 × 11 0.800 1.60 175 6.3 × 11.2 0.350 0.700 290 ✽ 0.600 ✽ 1.20 8 × 11.5 0.117 0.234 555 0.234 8 × 15 0.085 0.170 730 0.155 5 63 V.DC ✽ 260 2.00 4.00 145 4.10 8.20 80 1.00 2.00 240 1.80 3.60 114 0.468 485 0.342 0.684 405 0.680 1.36 260 0.310 635 0.230 0.460 535 0.450 0.900 340 × 20 0.065 0.130 995 0.120 0.240 860 0.178 0.356 690 0.330 0.660 455 10 × 12.5 0.090 0.180 755 0.162 0.324 615 0.256 0.512 535 0.530 1.06 306 10 × 16 0.068 0.136 1050 0.119 0.238 850 0.194 0.388 600 0.360 0.720 400 463 8 10 × 20 0.052 0.104 1220 0.090 0.180 1030 0.147 0.294 885 0.240 0.480 10 × 25 0.045 0.090 1440 0.082 0.164 1200 0.130 0.260 1050 0.210 0.420 599 10 × 30 0.035 0.070 1815 0.060 0.120 1610 0.090 0.180 1300 0.150 0.300 698 12.5 × 15 0.065 0.130 1205 0.110 0.220 1150 0.150 0.300 1020 0.230 0.460 511 12.5 × 20 0.038 0.076 1655 0.063 0.126 1480 0.085 0.170 1285 0.180 0.360 671 12.5 × 25 0.030 0.060 1945 0.050 0.100 1832 0.070 0.140 1720 0.110 0.220 807 12.5 × 30 0.025 0.050 2310 0.040 0.080 2215 0.055 0.110 2090 0.098 0.196 937 12.5 × 35 0.022 0.044 2510 0.034 0.068 2285 0.047 0.094 2265 0.087 0.174 1040 12.5 × 40 0.018 0.036 2655 0.030 0.060 2590 0.042 0.084 2560 0.072 0.144 1130 16 × 15 0.043 0.086 1690 0.080 0.160 1610 0.090 0.180 1410 0.140 0.280 793 16 × 20 0.029 0.058 2205 0.048 0.096 1835 0.059 0.118 1765 0.110 0.220 995 16 × 25 0.022 0.044 2555 0.034 0.068 2235 0.050 0.100 2160 0.089 0.178 1170 16 × 31.5 0.018 0.036 3010 0.028 0.056 2700 0.043 0.086 2670 0.062 0.124 1520 16 × 35.5 0.016 0.032 3150 0.025 0.050 2790 0.036 0.072 2770 0.053 0.106 1730 16 × 40 0.015 0.030 3360 0.023 0.046 2845 0.030 0.060 2825 0.047 0.094 1920 18 × 15 0.038 0.076 2000 0.068 0.136 1900 0.086 0.172 1690 0.120 0.240 917 1230 18 × 20 0.028 0.056 2490 0.042 0.084 2420 0.055 0.110 2290 0.080 0.160 18 × 25 0.020 0.040 2740 0.029 0.058 2610 0.043 0.086 2585 0.070 0.140 1420 18 × 31.5 0.016 0.032 3635 0.025 0.050 3000 0.032 0.064 2950 0.062 0.124 1600 18 × 35.5 0.015 0.030 3680 0.023 0.046 3100 0.030 0.060 3095 0.041 0.082 1770 18 × 40 0.014 0.028 3735 – – – 0.025 0.050 3205 0.036 0.072 2300 ✽ Case size (mm) (0D×L) 5 × 11 Capacitance (µF) 1.0 2.2 3.3 4.7 10 12 15 18 22 Impedance (Ω)/(100 kHz) 20 °C 2.40 1.80 1.30 1.30 1.30 1.30 1.30 1.30 1.30 –10 °C 4.80 3.60 2.60 2.60 2.60 2.60 2.60 2.60 2.60 Ripple current (mA r.m.s)(100 kHz) 20 45 65 95 125 135 145 155 155 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 08 Mar. 2016 Aluminum Electrolytic Capacitors (Radial Lead Type) Characteristics list Endurance : 105 °C 04 to 06.3=1000 h, 08=2000 h, 010=3000 h, 012.5 to 018=5000 h Case size (mm) Rated Cap. voltage (±20 %) (V.DC) (µF) 27 56 100 120 220 270 330 390 470 560 820 1000 1200 1500 1800 6.3 2200 2700 3300 3900 4700 5600 6800 8200 10000 12000 15000 0D 4 5 5 6.3 6.3 6.3 6.3 8 8 8 8 10 10 8 10 10 12.5 10 10 16 10 12.5 16 12.5 18 12.5 12.5 16 12.5 16 12.5 16 18 16 16 18 16 18 18 Specification Ripple Impedance current Endurance (100 kHz) L (100 kHz) (hours) (+20 °C) (+105 °C) (Ω) (mA r.m.s.) 7 65 2.000 1000 7 120 0.950 1000 11 175 0.800 1000 7 200 0.450 1000 11.2 290 0.350 1000 11.2 290 0.350 1000 11.2 290 0.350 1000 11.5 555 0.117 2000 11.5 555 0.117 2000 11.5 555 0.117 2000 15 730 0.085 2000 12.5 755 0.090 3000 12.5 755 0.090 3000 20 995 0.065 2000 16 1050 0.068 3000 20 1220 0.052 3000 15 1205 0.065 5000 25 1440 0.045 3000 25 1440 0.045 3000 15 1690 0.043 5000 30 1815 0.035 3000 20 1655 0.038 5000 15 1690 0.043 5000 20 1655 0.038 5000 15 2000 0.038 5000 25 1945 0.030 5000 30 2310 0.025 5000 20 2205 0.029 5000 35 2510 0.022 5000 20 2205 0.029 5000 40 2655 0.018 5000 25 2555 0.022 5000 20 2490 0.028 5000 31.5 3010 0.018 5000 35.5 3150 0.016 5000 25 2740 0.020 5000 40 3360 0.015 5000 31.5 3635 0.016 5000 35.5 3680 0.015 5000 Lead length (mm) Min. Packaging Q'ty Lead space Lead dia. Taping Taping 0d Straight ✽B ✽H 0.45 0.45 0.50 0.45 0.50 0.50 0.50 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.80 0.60 0.60 0.80 0.60 0.80 0.60 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 1.5 2.0 2.0 2.5 2.5 2.5 2.5 3.5 3.5 3.5 3.5 5.0 5.0 3.5 5.0 5.0 5.0 5.0 5.0 7.5 5.0 5.0 7.5 5.0 7.5 5.0 5.0 7.5 5.0 7.5 5.0 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 5.0 7.5 5.0 7.5 5.0 7.5 7.5 7.5 7.5 7.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 Part No. EEAFC0J270( ) EEAFC0J560( ) EEUFC0J101( ) EEAFC0J121( ) EEUFC0J221( ) EEUFC0J271( ) EEUFC0J331S( ) EEUFC0J391( ) EEUFC0J471( ) EEUFC0J561( ) EEUFC0J821L( ) EEUFC0J821( ) EEUFC0J102( ) EEUFC0J122L( ) EEUFC0J122( ) EEUFC0J152( ) EEUFC0J152S( ) EEUFC0J182( ) EEUFC0J222( ) EEUFC0J222S( ) EEUFC0J272L EEUFC0J272( ) EEUFC0J272S( ) EEUFC0J332( ) EEUFC0J332S( ) EEUFC0J392( ) EEUFC0J472 EEUFC0J472S( ) EEUFC0J562L EEUFC0J562( ) EEUFC0J682L EEUFC0J682( ) EEUFC0J682S( ) EEUFC0J822 EEUFC0J103 EEUFC0J103S( ) EEUFC0J123L EEUFC0J123 EEUFC0J153 Straight Taping leads (pcs) (pcs) 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 100 200 100 200 100 200 100 100 100 100 100 100 100 100 100 100 100 50 50 2000 2000 2000 2000 2000 2000 2000 1000 1000 1000 1000 500 500 1000 500 500 500 500 500 250 500 250 500 250 500 250 250 250 250 250 · When requesting taped product, please put the letter "B" or "H" between the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, H=2.5 mm. · Please refer to the page of “Taping dimensions”. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 08 Mar. 2016 Aluminum Electrolytic Capacitors (Radial Lead Type) Characteristics list Endurance : 105 °C 04 to 06.3=1000 h, 08=2000 h, 010=3000 h, 012.5 to 018=5000 h Case size (mm) Rated Cap. voltage (±20 %) (V.DC) (µF) 22 39 82 100 150 180 220 330 390 470 560 680 820 1000 1200 10 1500 1800 2200 2700 3300 3900 4700 5600 6800 8200 10000 12000 0D L 4 5 5 6.3 5 6.3 6.3 6.3 8 8 8 10 8 10 10 8 10 10 12.5 10 12.5 16 10 12.5 12.5 18 12.5 16 12.5 16 12.5 16 16 18 16 18 16 18 18 18 7 7 11 7 11 11.2 11.2 11.2 11.5 11.5 11.5 12.5 15 12.5 16 20 16 20 15 25 20 15 30 20 25 15 30 20 35 20 40 25 25 20 31.5 25 35.5 31.5 35.5 40 Specification Ripple Impedance current Endurance (100 kHz) (100 kHz) (hours) (+20 °C) (+105 °C) (Ω) (mA r.m.s.) 65 2.000 1000 120 0.950 1000 175 0.800 1000 200 0.450 1000 175 0.800 1000 290 0.350 1000 290 0.350 1000 290 0.350 1000 555 0.117 2000 555 0.117 2000 555 0.117 2000 755 0.090 3000 730 0.085 2000 755 0.090 3000 1050 0.068 3000 995 0.065 2000 1050 0.068 3000 1220 0.052 3000 1205 0.065 5000 1440 0.045 3000 1655 0.038 5000 1690 0.043 5000 1815 0.035 3000 1655 0.038 5000 1945 0.030 5000 2000 0.038 5000 2310 0.025 5000 2205 0.029 5000 2510 0.022 5000 2205 0.029 5000 2655 0.018 5000 2555 0.022 5000 2555 0.022 5000 2490 0.028 5000 3010 0.018 5000 2740 0.020 5000 3150 0.016 5000 3635 0.016 5000 3680 0.015 5000 3735 0.014 5000 Lead length (mm) Min. Packaging Q'ty Lead space Lead dia. Taping Taping 0d Straight ✽B ✽H 0.45 0.45 0.50 0.45 0.50 0.50 0.50 0.50 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.80 0.60 0.60 0.60 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 1.5 2.0 2.0 2.5 2.0 2.5 2.5 2.5 3.5 3.5 3.5 5.0 3.5 5.0 5.0 3.5 5.0 5.0 5.0 5.0 5.0 7.5 5.0 5.0 5.0 7.5 5.0 7.5 5.0 7.5 5.0 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 5.0 5.0 7.5 7.5 7.5 7.5 7.5 7.5 7.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 Part No. EEAFC1A220( ) EEAFC1A390( ) EEUFC1A820( ) EEAFC1A820( ) EEUFC1A101S( ) EEUFC1A151( ) EEUFC1A181( ) EEUFC1A221S( ) EEUFC1A331( ) EEUFC1A391( ) EEUFC1A471( ) EEUFC1A561( ) EEUFC1A681L( ) EEUFC1A681( ) EEUFC1A821( ) EEUFC1A102L( ) EEUFC1A102( ) EEUFC1A122( ) EEUFC1A122S( ) EEUFC1A152( ) EEUFC1A182( ) EEUFC1A182S( ) EEUFC1A222L EEUFC1A222( ) EEUFC1A272( ) EEUFC1A272S( ) EEUFC1A332 EEUFC1A332S( ) EEUFC1A392L EEUFC1A392( ) EEUFC1A472L EEUFC1A472( ) EEUFC1A562( ) EEUFC1A562S( ) EEUFC1A682 EEUFC1A682S( ) EEUFC1A822L EEUFC1A822 EEUFC1A103 EEUFC1A123 Straight Taping leads (pcs) (pcs) 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 100 200 200 100 100 100 100 100 100 100 100 100 100 100 100 50 50 50 2000 2000 2000 2000 2000 2000 2000 2000 1000 1000 1000 500 1000 500 500 1000 500 500 500 500 500 250 500 500 250 250 250 250 250 250 250 · When requesting taped product, please put the letter "B" or "H" between the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, H=2.5 mm. · Please refer to the page of “Taping dimensions”. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 08 Mar. 2016 Aluminum Electrolytic Capacitors (Radial Lead Type) Characteristics list Endurance : 105 °C 04 to 06.3=1000 h, 08=2000 h, 010=3000 h, 012.5 to 018=5000 h Case size (mm) Rated Cap. voltage (±20 %) (V.DC) (µF) 15 27 47 56 68 100 120 220 270 330 390 470 560 680 820 1000 16 1200 1500 1800 2200 2700 3300 3900 4700 5600 6800 8200 0D L 4 5 5 5 6.3 5 6.3 6.3 8 8 8 10 8 10 10 8 10 10 12.5 10 10 10 16 10 12.5 16 12.5 18 12.5 16 12.5 16 12.5 18 16 18 16 18 16 18 16 18 7 7 11 11 7 11 11.2 11.2 11.5 11.5 11.5 12.5 15 12.5 16 20 16 20 15 20 25 25 15 30 20 15 25 15 25 20 30 20 35 20 25 20 31.5 25 35.5 31.5 40 35.5 Specification Ripple Impedance current Endurance (100 kHz) (100 kHz) (hours) (+20 °C) (+105 °C) (Ω) (mA r.m.s.) 65 2.000 1000 120 0.950 1000 175 0.800 1000 175 0.800 1000 200 0.450 1000 175 0.800 1000 290 0.350 1000 290 0.350 1000 555 0.117 2000 555 0.117 2000 555 0.117 2000 755 0.090 3000 730 0.085 2000 755 0.090 3000 1050 0.068 3000 995 0.065 2000 1050 0.068 3000 1220 0.052 3000 1205 0.065 5000 1220 0.052 3000 1440 0.045 3000 1440 0.045 3000 1690 0.043 5000 1815 0.035 3000 1655 0.038 5000 1690 0.043 5000 1945 0.030 5000 2000 0.038 5000 1945 0.030 5000 2205 0.029 5000 2310 0.025 5000 2205 0.029 5000 2510 0.022 5000 2490 0.028 5000 2555 0.022 5000 2490 0.028 5000 3010 0.018 5000 2740 0.020 5000 3150 0.016 5000 3635 0.016 5000 3360 0.015 5000 3680 0.015 5000 Lead length (mm) Min. Packaging Q'ty Lead space Lead dia. Taping Taping 0d Straight ✽B ✽H 0.45 0.45 0.50 0.50 0.45 0.50 0.50 0.50 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.80 0.60 0.60 0.80 0.60 0.80 0.60 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 1.5 2.0 2.0 2.0 2.5 2.0 2.5 2.5 3.5 3.5 3.5 5.0 3.5 5.0 5.0 3.5 5.0 5.0 5.0 5.0 5.0 5.0 7.5 5.0 5.0 7.5 5.0 7.5 5.0 7.5 5.0 7.5 5.0 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 5.0 7.5 5.0 7.5 5.0 7.5 7.5 7.5 7.5 7.5 7.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 Part No. EEAFC1C150( ) EEAFC1C270( ) EEUFC1C470( ) EEUFC1C560( ) EEAFC1C560( ) EEUFC1C680( ) EEUFC1C101( ) EEUFC1C121( ) EEUFC1C221( ) EEUFC1C271( ) EEUFC1C331( ) EEUFC1C391( ) EEUFC1C471L( ) EEUFC1C471( ) EEUFC1C561( ) EEUFC1C681L( ) EEUFC1C681( ) EEUFC1C821( ) EEUFC1C821S( ) EEUFC1C102S( ) EEUFC1C102( ) EEUFC1C122( ) EEUFC1C122S( ) EEUFC1C152L EEUFC1C152( ) EEUFC1C152S( ) EEUFC1C182( ) EEUFC1C182S( ) EEUFC1C222( ) EEUFC1C222S( ) EEUFC1C272L EEUFC1C272( ) EEUFC1C332 EEUFC1C332S( ) EEUFC1C392( ) EEUFC1C392S( ) EEUFC1C472 EEUFC1C472S( ) EEUFC1C562L EEUFC1C562 EEUFC1C682 EEUFC1C822 Straight Taping leads (pcs) (pcs) 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 100 200 100 200 100 200 100 100 100 100 100 100 100 100 100 100 50 100 50 2000 2000 2000 2000 2000 2000 2000 2000 1000 1000 1000 500 1000 500 500 1000 500 500 500 500 500 500 250 500 250 500 250 500 250 250 250 250 250 250 · When requesting taped product, please put the letter "B" or "H" between the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, H=2.5 mm. · Please refer to the page of “Taping dimensions”. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 08 Mar. 2016 Aluminum Electrolytic Capacitors (Radial Lead Type) Characteristics list Endurance : 105 °C 04 to 06.3=1000 h, 08=2000 h, 010=3000 h, 012.5 to 018=5000 h Case size (mm) Rated Cap. voltage (±20 %) (V.DC) (µF) 10 22 39 47 82 100 180 220 270 330 390 470 560 680 25 820 1000 1200 1500 1800 2200 2700 3300 3900 4700 5600 0D L 4 5 5 6.3 5 6.3 6.3 8 8 10 8 10 10 8 10 10 12.5 10 10 12.5 10 12.5 16 12.5 18 12.5 16 12.5 16 12.5 18 16 16 18 16 18 18 18 7 7 11 7 11 11.2 11.2 11.5 11.5 12.5 15 12.5 16 20 16 20 15 20 25 20 30 20 15 25 15 25 20 30 20 35 20 25 31.5 25 35.5 31.5 35.5 40 Specification Ripple Impedance current Endurance (100 kHz) (100 kHz) (hours) (+20 °C) (+105 °C) (Ω) (mA r.m.s.) 65 2.000 1000 120 0.950 1000 175 0.800 1000 200 0.450 1000 175 0.800 1000 290 0.350 1000 290 0.350 1000 555 0.117 2000 555 0.117 2000 755 0.090 3000 730 0.085 2000 755 0.090 3000 1050 0.068 3000 995 0.065 2000 1050 0.068 3000 1220 0.052 3000 1205 0.065 5000 1220 0.052 3000 1440 0.045 3000 1655 0.038 5000 1815 0.035 3000 1655 0.038 5000 1690 0.043 5000 1945 0.030 5000 2000 0.038 5000 1945 0.030 5000 2205 0.029 5000 2310 0.025 5000 2205 0.029 5000 2510 0.022 5000 2490 0.028 5000 2555 0.022 5000 3010 0.018 5000 2740 0.020 5000 3150 0.016 5000 3635 0.016 5000 3680 0.015 5000 3735 0.014 5000 Lead length (mm) Min. Packaging Q'ty Lead space Lead dia. Taping Taping 0d Straight ✽B ✽H 0.45 0.45 0.50 0.45 0.50 0.50 0.50 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.80 0.60 0.80 0.60 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 1.5 2.0 2.0 2.5 2.0 2.5 2.5 3.5 3.5 5.0 3.5 5.0 5.0 3.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 5.0 7.5 5.0 7.5 5.0 7.5 5.0 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 5.0 7.5 5.0 7.5 7.5 7.5 7.5 7.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 Part No. EEAFC1E100( ) EEAFC1E220( ) EEUFC1E390( ) EEAFC1E390( ) EEUFC1E470( ) EEUFC1E820( ) EEUFC1E101S( ) EEUFC1E181( ) EEUFC1E221( ) EEUFC1E271( ) EEUFC1E331L( ) EEUFC1E331( ) EEUFC1E391( ) EEUFC1E471L( ) EEUFC1E471( ) EEUFC1E561( ) EEUFC1E561S( ) EEUFC1E681( ) EEUFC1E821( ) EEUFC1E821S( ) EEUFC1E102L EEUFC1E102( ) EEUFC1E102S( ) EEUFC1E122( ) EEUFC1E122S( ) EEUFC1E152( ) EEUFC1E152S( ) EEUFC1E182L EEUFC1E182( ) EEUFC1E222 EEUFC1E222S( ) EEUFC1E272( ) EEUFC1E332 EEUFC1E332S( ) EEUFC1E392L EEUFC1E392 EEUFC1E472 EEUFC1E562 Straight Taping leads (pcs) (pcs) 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 200 100 200 100 200 100 100 100 100 100 100 100 100 100 50 50 50 2000 2000 2000 2000 2000 2000 2000 1000 1000 500 1000 500 500 1000 500 500 500 500 500 500 500 250 500 250 500 250 250 250 250 250 · When requesting taped product, please put the letter "B" or "H" between the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, H=2.5 mm. · Please refer to the page of “Taping dimensions”. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 08 Mar. 2016 Aluminum Electrolytic Capacitors (Radial Lead Type) Characteristics list Endurance : 105 °C 04 to 06.3=1000 h, 08=2000 h, 010=3000 h, 012.5 to 018=5000 h Case size (mm) Rated Cap. voltage (±20 %) (V.DC) (µF) 6.8 12 22 27 33 47 56 68 100 120 150 180 220 270 330 390 470 35 560 680 820 1000 1200 1500 1800 2200 2700 3300 3900 0D L 4 5 5 5 6.3 5 6.3 6.3 6.3 8 8 8 10 8 10 10 8 10 10 12.5 10 10 12.5 10 12.5 16 12.5 18 12.5 16 12.5 16 12.5 16 18 12.5 16 18 16 18 16 18 18 18 7 7 11 11 7 11 11.2 11.2 11.2 11.5 11.5 11.5 12.5 15 12.5 16 20 16 20 15 20 25 20 30 20 15 25 15 25 20 30 20 35 25 20 40 25 20 31.5 25 35.5 31.5 35.5 40 Specification Ripple Impedance current Endurance (100 kHz) (100 kHz) (hours) (+20 °C) (+105 °C) (Ω) (mA r.m.s.) 65 2.000 1000 120 0.950 1000 175 0.800 1000 175 0.800 1000 200 0.450 1000 175 0.080 1000 290 0.350 1000 290 0.350 1000 290 0.350 1000 555 0.117 2000 555 0.117 2000 555 0.117 2000 755 0.090 3000 730 0.085 2000 755 0.090 3000 1050 0.068 3000 995 0.065 2000 1050 0.068 3000 1220 0.052 3000 1205 0.065 5000 1220 0.052 3000 1440 0.045 3000 1655 0.038 5000 1815 0.035 3000 1655 0.038 5000 1690 0.043 5000 1945 0.030 5000 2000 0.038 5000 1945 0.030 5000 2205 0.029 5000 2310 0.025 5000 2205 0.029 5000 2510 0.022 5000 2555 0.022 5000 2490 0.028 5000 2655 0.018 5000 2555 0.022 5000 2490 0.028 5000 3010 0.018 5000 2740 0.020 5000 3150 0.016 5000 3635 0.016 5000 3680 0.015 5000 3735 0.014 5000 Lead length (mm) Min. Packaging Q'ty Lead space Lead dia. Taping Taping 0d Straight ✽B ✽H 0.45 0.45 0.50 0.50 0.45 0.50 0.50 0.50 0.50 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.80 0.60 0.80 0.60 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 1.5 2.0 2.0 2.0 2.5 2.0 2.5 2.5 2.5 3.5 3.5 3.5 5.0 3.5 5.0 5.0 3.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 5.0 7.5 5.0 7.5 5.0 7.5 5.0 7.5 7.5 5.0 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 5.0 7.5 5.0 7.5 7.5 7.5 7.5 7.5 7.5 7.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 Part No. EEAFC1V6R8( ) EEAFC1V120( ) EEUFC1V220( ) EEUFC1V270( ) EEAFC1V270( ) EEUFC1V330( ) EEUFC1V470( ) EEUFC1V560( ) EEUFC1V680( ) EEUFC1V101( ) EEUFC1V121( ) EEUFC1V151( ) EEUFC1V181( ) EEUFC1V221L( ) EEUFC1V221( ) EEUFC1V271( ) EEUFC1V331L( ) EEUFC1V331( ) EEUFC1V391( ) EEUFC1V391S( ) EEUFC1V471( ) EEUFC1V561( ) EEUFC1V561S( ) EEUFC1V681L EEUFC1V681( ) EEUFC1V681S( ) EEUFC1V821L( ) EEUFC1V821( ) EEUFC1V102( ) EEUFC1V102S( ) EEUFC1V122L EEUFC1V122( ) EEUFC1V152L EEUFC1V152( ) EEUFC1V152S( ) EEUFC1V182L EEUFC1V182( ) EEUFC1V182S( ) EEUFC1V222 EEUFC1V222S( ) EEUFC1V272L EEUFC1V272 EEUFC1V332 EEUFC1V392 Straight Taping leads (pcs) (pcs) 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 200 100 200 100 200 100 100 100 100 100 100 100 100 100 100 100 100 50 50 50 2000 2000 2000 2000 2000 2000 2000 2000 2000 1000 1000 1000 500 1000 500 500 1000 500 500 500 500 500 500 500 250 500 250 500 250 250 250 250 250 250 250 · When requesting taped product, please put the letter "B" or "H" between the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, H=2.5 mm. · Please refer to the page of “Taping dimensions”. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 08 Mar. 2016 Aluminum Electrolytic Capacitors (Radial Lead Type) Characteristics list Endurance : 105 °C 04 to 06.3=1000 h, 08=2000 h, 010=3000 h, 012.5 to 018=5000 h Case size (mm) Rated Cap. voltage (±20 %) (V.DC) (µF) 2.2 3.3 4.7 10 12 15 18 22 33 39 47 68 82 100 120 150 180 220 50 270 330 390 470 560 680 820 1000 1200 1500 1800 2200 0D L 5 5 5 5 5 5 5 5 6.3 6.3 6.3 8 8 10 8 10 10 8 10 10 12.5 10 10 12.5 12.5 16 10 12.5 12.5 18 12.5 16 12.5 18 12.5 16 16 18 16 16 18 18 11 11 11 11 11 11 11 11 11.2 11.2 11.2 11.5 11.5 12.5 15 12.5 16 20 16 20 15 25 30 20 20 15 30 25 25 15 30 20 35 20 40 25 31.5 25 35.5 40 31.5 35.5 Specification Ripple Impedance current Endurance (100 kHz) (100 kHz) (hours) (+20 °C) (+105 °C) (Ω) (mA r.m.s.) 45 1.800 1000 65 1.300 1000 95 1.300 1000 125 1.300 1000 135 1.300 1000 145 1.300 1000 155 1.300 1000 155 1.300 1000 260 0.600 1000 260 0.600 1000 260 0.600 1000 485 0.234 2000 485 0.234 2000 615 0.162 3000 635 0.155 2000 615 0.162 3000 850 0.119 3000 860 0.120 2000 850 0.119 3000 1030 0.090 3000 1150 0.110 5000 1200 0.082 3000 1610 0.060 3000 1480 0.063 5000 1480 0.063 5000 1610 0.080 5000 1610 0.060 3000 1832 0.050 5000 1832 0.050 5000 1900 0.068 5000 2215 0.040 5000 1835 0.048 5000 2285 0.034 5000 2420 0.042 5000 2590 0.030 5000 2235 0.034 5000 2700 0.028 5000 2610 0.029 5000 2790 0.025 5000 2845 0.023 5000 3000 0.025 5000 3100 0.023 5000 Lead length (mm) Min. Packaging Q'ty Lead space Lead dia. Taping Taping 0d Straight ✽B ✽H 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.80 0.60 0.60 0.60 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.5 2.5 2.5 3.5 3.5 5.0 3.5 5.0 5.0 3.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 5.0 5.0 5.0 7.5 5.0 7.5 5.0 7.5 5.0 7.5 7.5 7.5 7.5 7.5 7.5 7.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 5.0 5.0 7.5 7.5 7.5 7.5 7.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 Part No. EEUFC1H2R2( ) EEUFC1H3R3( ) EEUFC1H4R7( ) EEUFC1H100L( ) EEUFC1H120( ) EEUFC1H150( ) EEUFC1H180( ) EEUFC1H220( ) EEUFC1H330( ) EEUFC1H390( ) EEUFC1H470( ) EEUFC1H680( ) EEUFC1H820( ) EEUFC1H101( ) EEUFC1H121L( ) EEUFC1H121( ) EEUFC1H151( ) EEUFC1H181L( ) EEUFC1H181( ) EEUFC1H221( ) EEUFC1H221S( ) EEUFC1H271( ) EEUFC1H331L EEUFC1H331( ) EEUFC1H391( ) EEUFC1H391S( ) EEUFC1H471L EEUFC1H471( ) EEUFC1H561( ) EEUFC1H561S( ) EEUFC1H681L EEUFC1H681( ) EEUFC1H821L EEUFC1H821( ) EEUFC1H102L EEUFC1H102( ) EEUFC1H122 EEUFC1H122S( ) EEUFC1H152L EEUFC1H182L EEUFC1H182 EEUFC1H222 Straight Taping leads (pcs) (pcs) 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 200 200 100 100 200 200 100 100 100 100 100 100 100 100 100 100 100 50 50 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 1000 1000 500 1000 500 500 1000 500 500 500 500 500 500 250 500 500 250 250 250 250 250 · When requesting taped product, please put the letter "B" or "H" between the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, H=2.5 mm. · Please refer to the page of “Taping dimensions”. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 08 Mar. 2016 Aluminum Electrolytic Capacitors (Radial Lead Type) Characteristics list Endurance : 105 °C 04 to 06.3=1000 h, 08=2000 h, 010=3000 h, 012.5 to 018=5000 h Case size (mm) Rated Cap. voltage (±20 %) (V.DC) (µF) 12 22 33 47 56 68 82 100 120 150 180 220 270 63 330 390 470 560 680 820 1000 1200 1500 1800 0D L 5 6.3 6.3 8 8 8 10 8 10 10 8 10 12.5 10 10 12.5 16 10 12.5 12.5 18 12.5 16 16 12.5 16 18 12.5 16 18 16 16 16 18 18 18 11 11.2 11.2 11.5 11.5 11.5 12.5 15 12.5 16 20 20 15 20 25 20 15 30 20 25 15 30 20 25 35 25 20 40 31.5 25 31.5 35.5 40 31.5 35.5 40 Specification Ripple Impedance current Endurance (100 kHz) (100 kHz) (hours) (+20 °C) (+105 °C) (Ω) (mA r.m.s.) 145 2.000 1000 240 1.000 1000 240 1.000 1000 405 0.342 2000 405 0.342 2000 405 0.342 2000 535 0.256 3000 535 0.230 2000 535 0.256 3000 600 0.194 3000 690 0.178 2000 885 0.147 3000 1020 0.150 5000 885 0.147 3000 1050 0.130 3000 1285 0.085 5000 1410 0.090 5000 1300 0.090 3000 1285 0.085 5000 1720 0.070 5000 1690 0.086 5000 2090 0.055 5000 1765 0.059 5000 2160 0.050 5000 2265 0.047 5000 2160 0.050 5000 2290 0.055 5000 2560 0.042 5000 2670 0.043 5000 2585 0.043 5000 2670 0.043 5000 2770 0.036 5000 2825 0.030 5000 2950 0.032 5000 3095 0.030 5000 3205 0.025 5000 Lead length (mm) Min. Packaging Q'ty Lead space Lead dia. Taping Taping 0d Straight ✽B ✽H 0.50 0.50 0.50 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.80 0.60 0.60 0.60 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 2.0 2.5 2.5 3.5 3.5 3.5 5.0 3.5 5.0 5.0 3.5 5.0 5.0 5.0 5.0 5.0 7.5 5.0 5.0 5.0 7.5 5.0 7.5 7.5 5.0 7.5 7.5 5.0 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 5.0 5.0 7.5 7.5 7.5 7.5 7.5 7.5 2.5 2.5 2.5 Part No. Straight Taping leads (pcs) (pcs) EEUFC1J120( ) EEUFC1J220( ) EEUFC1J330( ) EEUFC1J470( ) EEUFC1J560( ) EEUFC1J680( ) EEUFC1J820( ) EEUFC1J101L( ) EEUFC1J101( ) EEUFC1J121( ) EEUFC1J151( ) EEUFC1J181( ) EEUFC1J181S( ) EEUFC1J221X( ) EEUFC1J221( ) EEUFC1J221S( ) EEUFC1J271( ) EEUFC1J331L EEUFC1J331( ) EEUFC1J391( ) EEUFC1J391S( ) EEUFC1J471L EEUFC1J471( ) EEUFC1J561( ) EEUFC1J681L EEUFC1J681( ) EEUFC1J681S( ) EEUFC1J821L EEUFC1J821 EEUFC1J821S( ) EEUFC1J102U EEUFC1J102 EEUFC1J122L EEUFC1J122 EEUFC1J152 EEUFC1J182 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 100 200 200 100 100 100 100 100 100 100 100 100 100 100 100 100 50 50 50 2000 2000 2000 1000 1000 1000 500 1000 500 500 1000 500 500 500 500 500 250 500 500 250 250 250 250 250 250 · When requesting taped product, please put the letter "B" or "H" between the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, H=2.5 mm. · Please refer to the page of “Taping dimensions”. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 08 Mar. 2016 Aluminum Electrolytic Capacitors (Radial Lead Type) Characteristics list Endurance : 105 °C 04 to 06.3=1000 h, 08=2000 h, 010=3000 h, 012.5 to 018=5000 h Case size (mm) Rated Cap. voltage (±20 %) (V.DC) (µF) 5.6 12 22 33 39 56 68 100 120 100 150 180 220 270 330 390 470 560 680 0D L 5 6.3 8 8 10 8 10 10 10 12.5 10 12.5 16 12.5 18 12.5 16 12.5 16 12.5 18 16 18 16 18 16 18 18 11 11.2 11.5 15 12.5 20 16 20 25 15 30 20 15 25 15 30 20 35 25 40 20 31.5 25 35.5 31.5 40 35.5 40 Specification Lead length (mm) Ripple Lead space Impedance current Endurance Lead (100 kHz) (100 kHz) (hours) dia. Taping Taping (+20 °C) (+105 °C) 0d Straight ✽B ✽H (Ω) (mA r.m.s.) 80 4.10 1000 0.5 2.0 5.0 2.5 114 1.80 1000 0.5 2.5 5.0 2.5 260 0.680 2000 0.6 3.5 5.0 340 0.450 2000 0.6 3.5 5.0 306 0.530 3000 0.6 5.0 5.0 455 0.330 2000 0.6 5.0 5.0 400 0.360 3000 0.6 5.0 5.0 463 0.240 3000 0.6 5.0 5.0 599 0.210 3000 0.6 5.0 5.0 511 0.230 5000 0.6 5.0 5.0 698 0.150 3000 0.6 5.0 671 0.180 5000 0.6 5.0 5.0 793 0.140 5000 0.8 7.5 7.5 807 0.110 5000 0.6 5.0 5.0 917 0.120 5000 0.8 7.5 7.5 937 0.098 5000 0.8 5.0 995 0.110 5000 0.8 7.5 7.5 1040 0.087 5000 0.8 5.0 1170 0.089 5000 0.8 7.5 7.5 1130 0.072 5000 0.8 5.0 1230 0.080 5000 0.8 7.5 7.5 1520 0.062 5000 0.8 7.5 1420 0.070 5000 0.8 7.5 7.5 1730 0.053 5000 0.8 7.5 1600 0.062 5000 0.8 7.5 1920 0.047 5000 0.8 7.5 1770 0.041 5000 0.8 7.5 2300 0.036 5000 0.8 7.5 Min. Packaging Q'ty Part No. EEUFC2A5R6( ) EEUFC2A120( ) EEUFC2A220( ) EEUFC2A330L( ) EEUFC2A330( ) EEUFC2A390L( ) EEUFC2A390( ) EEUFC2A560( ) EEUFC2A680L( ) EEUFC2A680( ) EEUFC2A101L EEUFC2A101( ) EEUFC2A121S( ) EEUFC2A151( ) EEUFC2A151S( ) EEUFC2A181L EEUFC2A181( ) EEUFC2A221L EEUFC2A221( ) EEUFC2A271L EEUFC2A271S( ) EEUFC2A331 EEUFC2A331S( ) EEUFC2A391L EEUFC2A391 EEUFC2A471 EEUFC2A561 EEUFC2A681 Straight Taping leads (pcs) (pcs) 200 200 200 200 200 200 200 200 200 200 100 200 100 200 100 100 100 100 100 100 100 100 100 100 50 100 50 50 2000 2000 1000 1000 500 1000 500 500 500 500 500 250 500 250 250 250 250 250 · When requesting taped product, please put the letter "B" or "H" between the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, H=2.5 mm. · Please refer to the page of “Taping dimensions”. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 08 Mar. 2016