FSAV330 — 4-Channel, 2:1 Video Switch Features Description The FSAV330 video switch is a quad, single-pole / double-throw, high-speed CMOS TTL-compatible video switch. The low on resistance of the switch allows inputs to be connected to outputs without adding propagation delay or generating additional ground bounce noise. Replacement for the P15V330 Wide Bandwidth: 300MHz 4Ω Switch Connection between Two Ports Minimal Propagation Delay through the Switch Low lCC When /OE is LOW, the select pin connects the A port to the selected B port output. When /OE is HIGH, the switch is OPEN and a high-impedance state exists between the two ports. Zero Bounce in Flow-through Mode Control Inputs Compatible with TTL Level Applications Set-top Boxes Flat Panel Displays CRT Displays DVD - RW Ordering Information Operating Temperature Range Package Packing Method FSAV330M -40 to +85°C 16-Lead, Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150 inch Narrow Tube FSAV330MX -40 to +85°C 16-Lead, Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150 inch Narrow Tape and Reel FSAV330MTC -40 to +85°C 16-Lead, Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide FSAV330MTCX -40 to +85°C 16-, Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide FSAV330QSC -40 to +85°C 16-Lead, Quarter Size Outline Package (QSOP), JEDEC MO-137, 0.150 inch Wide Tube FSAV330QSCX -40 to +85°C 16-Lead, Quarter Size Outline Package (QSOP), JEDEC MO-137, 0.150 inch Wide Tape and Reel Part Number Tube Tape and Reel All packages are lead free per JEDEC: J-STD-020B standard. The Fairchild switch family derives from and embodies Fairchild’s proven switch technology used for several years in its 74LVX3L384 (FST3384) bus switch product. © 2002 Fairchild Semiconductor Corporation FSAV330 • Rev. 1.0.3 www.fairchildsemi.com FAV330 — 4-Channel, 2:1 Video Switch March 2008 Figure 1. Logic Diagram S 1 16 VCC 1B1 2 15 /OE 1B2 3 14 4B1 1A 4 13 4B2 2B1 5 12 4A 2B2 6 11 3B1 2A 7 10 3B2 GND 8 9 3A FSAV330 — 4-Channel, 2:1 Video Switch Pin Configurations Figure 2. Pin Assignments Pin Descriptions Pin # Pin Types Description 15 /OE Bus Switch Enabled 1 S Select Input 4,7,9,12 A Bus A 2,3,5,6,10,11,13,14 B1-B2 Bus B 8 GND Ground 16 VCC Supply Voltage Truth Table S /OE Function Don’t Care HIGH Disconnected LOW LOW A=B1 HIGH LOW A=B2 © 2002 Fairchild Semiconductor Corporation FSAV330 • Rev. 1.0.3 www.fairchildsemi.com 2 Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Symbol Parameter VCC Supply Voltage Min. Max. Unit -0.5 +7.0 V VS DC Switch Voltage -0.5 +7.0 V VIN DC Input Voltage (1) -0.5 +7.0 V IIK DC Input Diode Current IOUT DC Output Sink Current 128 mA DC VCC / GND Current ±100 mA +150 °C 4000 V ICC/IGND -50 TSTG Storage Temperature Range ESD Human Body Model, JESD22-A114 -65 mA Note: 1. The input and output negative voltage ratings may be exceeded if the input and output diode current ratings are observed. FSAV330 — 4-Channel, 2:1 Video Switch Absolute Maximum Ratings Recommended Operating Conditions The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not recommend exceeding them or designing to Absolute Maximum Ratings. Symbol Parameter Min. Max. Unit VCC Power Supply 4.0 5.5 V VIN Input Voltage 0 5.5 V VOUT Output Voltage 0 5.5 V tr , tf Input Rise and Fall Time Switch Control Input 0 5 Switch I/O 0 DC TA Operating Temperature, Free Air -40 +85 ns/V °C Note: 2. Unused control inputs must be held HIGH or LOW; they may not float. © 2002 Fairchild Semiconductor Corporation FSAV330 • Rev. 1.0.3 www.fairchildsemi.com 3 Typical values are at VCC=5.0V and TA= +25°C. Minimum and maximum values are at TA= -40 to +85°C. Symbol VANALOG VIK VIH VIL II IOZ Parameter Conditions Analog Signal Range Clamp Diode Voltage High-Level Input Voltage Low-Level Input Voltage Input Leakage Current Off-state Leakage Current (3) RON Switch On Resistance ICC Quiescent Supply Current ΔICC Increase in ICC per Input IIN=-18mA 0 ≤ VIN ≤ 5.5V 0 ≤ A, B ≤ VCC VIN=1.0V, RI=75Ω, ION=13mA VIN=2.0V, RI=75Ω, ION=26mA VIN=VCC or GND, IOUT=0 One Input at 3.4V Other Inputs at VCC or GND VCC (V) Min. 5 4.5 4.0 to 5.5 4.0 to 5.5 5.5 5.5 4.5 4.5 5.5 0 Typ. Max. Units 2 -1.2 V V V V µA µA 2.0 0.8 ±1.0 ±1.0 7 10 3 3 7 5.5 Ω µA 2.5 mA Note: 3. Measured by the voltage drop between the A and B pins at the indicated current through the switch. On resistance is determined by the lower of the voltages on the A or B pins. FSAV330 — 4-Channel, 2:1 Video Switch DC Electrical Characteristics AC Electrical Characteristics TA=-40 to +85°C, CL=50pF, RU=RD=500Ω. Symbol tPZH, tPZL tPHZ, tPLZ BW Parameter Output Enable Time, Select to Bus B Output Enable Time, /OE to Bus A, B Output Disable Time, Select to Bus B Output Disable Time, Output Enable Time /OE to Bus A, B -3dB Bandwidth XTALK Conditions (4) Crosstalk DG Differential Gain DP Differential Phase OIRR Off Isolation VCC=4.5 – 5.5V Min. Typ. Max. VCC=4.0V Min. Max. 5.2 5.1 5.6 5.2 5.5 VI=7V for tPLZ VI=Open for tPHZ RL=150Ω, TA=25°C Figure ns Figure 3 Figure 4 ns Figure 3 Figure 4 5.7 VI=7V for tPZL VI=Open for tPZH 5.5 Units 5.5 300 MHz RIN=10Ω, RL=150Ω, f=10MHz RL=150Ω, f=3.58MHz RL=150Ω, f=3.58MHz -58 dB 0.64 % 0.1 ° RL=150Ω, f=10MHz -60 dB Note: 4. This parameter is guaranteed by device characterization, not production tested. Capacitance TA=+25°C, f=1MHz. Capacitance is characterized, not production tested. Symbol CI/O CIN A Port B Port CON Parameter Conditions Control Pin Input Capacitance VCC=5.0V Input / Output Capacitance VCC, /OE=5.0V Switch On Capacitance VCC=5.0V, /OE=0V © 2002 Fairchild Semiconductor Corporation FSAV330 • Rev. 1.0.3 Typ. Units 3 7 pF 5 12 pF pF www.fairchildsemi.com 4 FSAV330 — 4-Channel, 2:1 Video Switch AC Loadings and Waveforms Notes: Input drive by 50Ω source terminated in 50Ω. CL includes load and stray capacitance. Input PRR=1.0MHz, tW =500ns. Figure 3. Figure Caption Figure 4. AC Waveforms © 2002 Fairchild Semiconductor Corporation FSAV330 • Rev. 1.0.3 www.fairchildsemi.com 5 10.00 9.80 A 8.89 16 9 B 4.00 3.80 6.00 PIN ONE INDICATOR 1.75 1 5.6 8 0.51 0.35 1.27 (0.30) 0.25 M 1.27 C B A 0.65 LAND PATTERN RECOMMENDATION 1.75 MAX 1.50 1.25 FSAV330 — 4-Channel, 2:1 Video Switch Physical Dimensions SEE DETAIL A 0.25 0.10 C 0.25 0.19 0.10 C 0.50 0.25 X 45° NOTES: UNLESS OTHERWISE SPECIFIED (R0.10) GAGE PLANE (R0.10) 8° 0° 0.36 A) THIS PACKAGE CONFORMS TO JEDEC MS-012, VARIATION AC, ISSUE C. B) ALL DIMENSIONS ARE IN MILLIMETERS. C) DIMENSIONS ARE EXCLUSIVE OF BURRS, MOLD FLASH AND TIE BAR PROTRUSIONS D) CONFORMS TO ASME Y14.5M-1994 E) LANDPATTERN STANDARD: SOIC127P600X175-16AM F) DRAWING FILE NAME: M16AREV12. SEATING PLANE 0.90 0.50 (1.04) DETAIL A SCALE: 2:1 Figure 5. 16-Lead, Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150-inch Narrow Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/ © 2002 Fairchild Semiconductor Corporation FSAV330 • Rev. 1.0.3 www.fairchildsemi.com 6 FSAV330 — 4-Channel, 2:1 Video Switch Physical Dimensions LAND PATTERN RECOMMENDATION TOP VIEW END VIEW SIDE VIEW DETAIL A Figure 6. 16-Lead, Quarter Size Outline Package (QSOP), JEDEC MO-137, 0.150-inch Wide Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/ © 2002 Fairchild Semiconductor Corporation FSAV330 • Rev. 1.0.3 www.fairchildsemi.com 7 5.00±0.10 4.55 5.90 4.45 7.35 0.65 4.4±0.1 1.45 FSAV330 — 4-Channel, 2:1 Video Switch Physical Dimensions 5.00 0.11 12° MTC16rev4 Figure 7. 16-Lead, Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/ © 2002 Fairchild Semiconductor Corporation FSAV330 • Rev. 1.0.3 www.fairchildsemi.com 8 FSAV330 — 4-Channel, 2:1 Video Switch © 2002 Fairchild Semiconductor Corporation FSAV330 • Rev. 1.0.3 www.fairchildsemi.com 9