RoHS HFC03 High Frequency Chip Inductors 0.020±0.004 (0.5±0.10) 0.039±0.004 (1.0±0.10) 0.020±0.004 (0.51±0.10) Dimensions: Inches (mm) 0.010±0.004 (0.25±0.10) 0.016 (0.41) 0.016 (0.41) Features • 0402 EIA size for high board density applications. • Excellent Q and SRF characteristics for high frequency applications. • Cost effective monolithic construction Electrical Inductance range: 1.0nh to 100nh Tolerance: use S for ± .3nh, J for 5%, K for 10% Test Frequency: Inductance and Q tested at 100MHz, 200mv with HP4291A Impedance Analyzer Inductance vs Freq. Characteristics measured on HP4291A Q vs Frequency Characteristics measured on HP4291A SRF measured on HPE4991 & HP87530 DCR measured on Chen Hwa CH502BC or HP4338B Mechanical Operating Temperature: -55ºC-125ºC Storage Temperature: Under 25ºC, Humidty 40% - 65% Solderability: 90% terminal coverage Test Condition: Pre heat:150ºC. 1min. Solder composition: Sn/Ag3.0/Cu.0.5 (Pb free) Solder temp: 245ºC±5ºC (pb Free) Immersion time: 4 ± 1 sec. Resistance to solder heat: No damage to part Test Condition Pre heat: 150ºC. 1min. Solder composition: Sn/Ag3.0/Cu.0.5 (Pb free) Solder temp: 260ºC±5ºC (pb Free) Immersion time: 10 ± 1 sec. Allied Part Number Inductance Tolerance Q (nh) Typical (%) @100MHz @100MHz Q Typical @800MHz SRF Typical (MHz) DCR Max. (Ω) IDC Max. (mA) HFC03-1N0S-RC 1.0 0.3nH 9 28 10000 0.10 400 HFC03-1N2S-RC 1.2 0.3nH 9 28 10000 0.10 400 HFC03-1N5S-RC 1.5 0.3nH 10 28 9000 0.10 400 HFC03-1N8S-RC HFC03-2N0S-RC 1.8 2.0 0.3nH 0.3nH 10 10 28 29 8700 8100 0.10 0.10 400 400 HFC03-2N2S-RC 2.2 0.3nH 10 29 8100 0.15 400 HFC03-2N4S-RC 2.4 0.3nH 10 29 7700 0.15 400 HFC03-2N7S-RC HFC03-3N0S-RC HFC03-3N3J-RC 2.7 3.0 3.3 0.3nH 0.3nH 11 11 30 30 7700 6300 0.15 0.15 400 400 0.15 11 30 30 6300 3.6 5 5 11 HFC03-3N6J-RC 6100 0.15 HFC03-3N9J-RC HFC03-4N3J-RC HFC03-4N7J-RC HFC03-5N6J-RC 3.9 4.3 4.7 5.6 5 5 5 5 11 11 11 11 31 31 0.20 0.20 31 31 6100 5400 5400 5100 0.20 0.20 400 400 400 400 400 400 HFC03-6N8J-RC 6.8 5 11 33 4550 0.25 400 HFC03-8N2J-RC 8.2 5 12 32 4100 0.30 300 HFC03-10NJ-RC 10 5 12 32 3900 0.35 300 HFC03-12NJ-RC 12 5 12 31 3000 0.40 300 HFC03-15NJ-RC 15 5 12 30 2600 0.50 300 HFC03-18NJ-RC 18 5 12 29 2350 0.55 300 HFC03-22NJ-RC 22 5 12 28 2000 0.70 300 HFC03-27NJ-RC 27 5 12 27 1900 300 HFC03-33NJ-RC 33 5 10 25 1700 0.80 1.00 HFC03-39NJ-RC 39 5 10 25 1600 1.20 150 HFC03-47NJ-RC 47 5 9 22 1300 1.30 150 HFC03-56NJ-RC 56 5 10 21 1250 1.50 150 HFC03-68NJ-RC 68 5 10 15 1000 1.70 100 HFC03-82NJ-RC 82 5 13 900 1.80 100 HFC03-100NJ-RC 100 5 9 9 3 850 2.00 100 200 Additional Inductance values available upon request. All specifications subject to change without notice Physical Packaging: 10000 pieces per 7 inch reel. . 949-356-1780 ALLIED COMPONENTS INTERNATIONAL REVISED 09/25/2014 www.alliedcomponents.com