Bulletin PD-20374 01/01 HFA30TA60CS HEXFRED Ultrafast, Soft Recovery Diode TM VR = 600V 2 Features • • • • • VF(typ.)* = 1.2V IF(AV) = 15A Ultrafast Recovery Ultrasoft Recovery Very Low IRRM Very Low Qrr Specified at Operating Conditions Qrr (typ.)= 80nC IRRM (typ.) = 4.0A Benefits • Reduced RFI and EMI • Reduced Power Loss in Diode and Switching Transistor • Higher Frequency Operation • Reduced Snubbing • Reduced Parts Count 1 3 trr(typ.) = 19ns di(rec)M/dt (typ.)* = 160A/µs Description International Rectifier's HFA30TA60CS is a state of the art center tap ultra fast recovery diode. Employing the latest in epitaxial construction and advanced processing techniques it features a superb combination of characteristics which result in performance which is unsurpassed by any rectifier previously available. With basic ratings of 600 volts and 15 amps per Leg continuous current, the HFA30TA60CS is especially well suited for use as the companion diode for IGBTs and MOSFETs. In addition to ultra fast recovery time, the HEXFRED product line features extremely low values of peak recovery current (IRRM) and does not exhibit any tendency to "snap-off" during the tb portion of recovery. The HEXFRED features combine to offer designers a rectifier with lower noise and significantly lower switching losses in both the diode and the switching transistor. These HEXFRED advantages can help to significantly reduce snubbing, component count and heatsink sizes. The HEXFRED HFA30TA60Cs is ideally suited for applications in power supplies and power conversion systems (such as inverters), motor drives, and many other similar applications where high speed, high efficiency is needed. D2Pak Absolute Maximum Ratings (per Leg) Parameter VR IF @ TC = 100°C IFSM IFRM PD @ TC = 25°C PD @ TC = 100°C TJ TSTG Cathode-to-Anode Voltage Continuous Forward Current Single Pulse Forward Current Maximum Repetitive Forward Current Maximum Power Dissipation Maximum Power Dissipation Operating Junction and Storage Temperature Range Max Units 600 15 150 60 74 29 V -55 to +150 W A C * 125°C 1 HFA30TA60CS Bulletin PD-20374 01/01 Electrical Characteristics (per Leg) @ TJ = 25°C (unless otherwise specified) Parameter Min Typ Max Units V BR Cathode Anode Breakdown Voltage 600 V VFM Max Forward Voltage IRM Max Reverse Leakage Current CT Junction Capacitance 1.3 1.7 1.5 2.0 1.2 1.6 1.0 10 400 1000 25 50 LS Series Inductance 8.0 V µA pF nH Test Conditions IR = 100µA IF = 15A See Fig. 1 IF = 30A IF = 15A, TJ = 125°C VR = VR Rated See Fig. 2 TJ = 125°C, VR = 0.8 x VR RatedD Rated See Fig. 3 VR = 200V Measured lead to lead 5mm from package body Dynamic Recovery Characteristics (per Leg) @ TJ = 25°C (unless otherwise specified) Parameter trr trr1 trr2 IRRM1 IRRM2 Qrr1 Qrr2 di(rec)M/dt1 di(rec)M/dt2 Reverse Recovery Time See Fig. 5, 10 Peak Recovery Current See Fig. 6 Reverse Recovery Charge See Fig. 7 Peak Rate of Fall of Recovery Current During tb See Fig. 8 Min Typ Max Units 19 42 70 4.0 6.5 80 220 188 160 60 90 6.0 10 180 450 ns A nC A/µs Test Conditions IF = 1.0A, dif/dt = 200A/µs, VR = 30V TJ = 25°C TJ = 125°C IF = 15A TJ = 25°C TJ = 125°C VR = 200V TJ = 25°C TJ = 125°C dif/dt = 200A/µs TJ = 25°C TJ = 125°C Thermal - Mechanical Characteristics (per Leg) Parameter Tlead! RthJC RthJA" Wt Mounting Torque ! " 2 Min Lead Temperature Junction-to-Case, Single Leg Conducting Junction-to-Case, Both Legs Conducting Thermal Resistance, Junction to Ambient Weight Typ Max Units 300 1.7 0.85 80 °C 2.0 0.07 6.0 5.0 12 10 K/W g (oz) Kg-cm lbf•in 0.063 in. from Case (1.6mm) for 10 sec Typical Socket Mount www.irf.com HFA30TA60CS Bulletin PD-20374 01/01 Reverse Current - IR (µA) 10000 TJ = 150°C TJ = 150°C 1000 100 TJ = 125°C 10 1 0.1 TJ = 25°C A 0.01 TJ = 125°C 10 0 100 200 300 400 500 600 Reverse Voltage - V R (V) TJ = 25°C Fig. 2 - Typical Reverse Current vs. Reverse Voltage, (per Leg) 100 1 1.0 A 1.2 1.4 1.6 1.8 2.0 2.2 2.4 ForwardVoltage VoltageDrop Drop- -VVFM (V) Forward FM(V) Fig. 1 - Maximum Forward Voltage Drop vs. Instantaneous Forward Current, (per Leg) Junction Capacitance -CT (pF) Instantaneous Forward Current - IF (A) 100 A TJ = 25°C A 10 0 100 200 300 400 500 600 Reverse Voltage - V R (V) Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage, (per Leg) Thermal Response (Z thJC ) 10 1 D = 0.50 0.20 0.10 PDM 0.05 0.1 t1 0.02 0.01 0.01 0.00001 t2 SINGLE PULSE (THERMAL RESPONSE) 0.0001 Notes: 1. Duty factor D = t 1 / t 2 2. Peak TJ = P DM x Z thJC + TC 0.001 0.01 0.1 1 10 t1 , Rectangular Pulse Duration (sec) Fig. 4 - Maximum Thermal Impedance Zthjc Characteristics, (per Leg) www.irf.com 3 HFA30TA60CS Bulletin PD-20374 01/01 100 25 VR = 200V TJ = 125°C TJ = 25°C I F = 30A I F = 15A I F = 5.0A 80 20 I F = 30A I F = 15A Irr- ( A) trr- (ns) I F = 5.0A 60 40 15 10 20 5 VR = 200V TJ = 125°C TJ = 25°C 0 100 A di f /dt - (A/µs) 10000 800 VR = 200V TJ = 125°C TJ = 25°C VR = 200V TJ = 125°C TJ = 25°C I F = 30A di (rec) M/dt- (A /µs) I F = 15A Qrr- (nC) di f /dt - (A/µs) 1000 Fig. 6 - Typical Recovery Current vs. dif/dt, (per Leg) Fig. 5 - Typical Reverse Recovery Time vs. dif/dt, (per Leg) 600 A 0 100 1000 IF = 5.0A 400 I F = 30A I F = 15A 1000 I F = 5.0A 200 0 100 A di f /dt - (A/µs) 1000 Fig. 7 - Typical Stored Charge vs. dif/dt, (per Leg) 4 100 100 A di f /dt - (A/µs) 1000 Fig. 8 - Typical di(rec)M/dt vs. dif/dt, (per Leg) www.irf.com HFA30TA60CS Bulletin PD-20374 01/01 3 t rr IF REVERSE RECOVERY CIRCUIT tb ta 0 Q rr VR = 200V 2 I RRM 4 0.5 I RRM di(rec)M/dt 0.01 Ω L = 70µH D.U.T. dif/dt ADJUST D G IRFP250 S Fig. 9 - Reverse Recovery Parameter Test Circuit www.irf.com 5 0.75 I RRM 1 di f /dt 1. dif/dt - Rate of change of current through zero crossing 2. IRRM - Peak reverse recovery current 3. trr - Reverse recovery time measured from zero crossing point of negative going IF to point where a line passing through 0.75 IRRM and 0.50 IRRM extrapolated to zero current 4. Qrr - Area under curve defined by trr and IRRM trr X IRRM Qrr = 2 5. di(rec)M/dt - Peak rate of change of current during tb portion of trr Fig. 10 - Reverse Recovery Waveform and Definitions 5 HFA30TA60CS Bulletin PD-20374 01/01 4.69 (0.18) 4.20 (0.16) 10.16 (0.40) REF. 1.32 (0.05) 15.49 (0.61) 1.22 (0.05) 6.47 (0.25) 93° 6.18 (0.24) 14.73 (0.58) 5.28 (0.21) 2.61 (0.10) 4.78 (0.19) 2.32 (0.09) 0.55 (0.02) 8.89 (0.35) 3X REF. 1.40 (0.055) 1.14 (0.045) 2X 1 0.46 (0.02) 0.93 (0.37) MINIMUM RECOMMENDED FOOTPRINT 0.69 (0.27) 11.43 (0.45) 3 4.57 (0.18) 2 4.32 (0.17) 8.89 (0.35) 17.78 (0.70) 0.61 (0.02) MAX. 5.08 (0.20) REF. 3.81 (0.15) 2.08 (0.08) 2X 2.54 (0.10) 2X Conforms to JEDEC Outline D2PAK Dimensions in millimeters and inches IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 01/01 6 www.irf.com