FCM31PT CHENMKO ENTERPRISE CO.,LTD THRU SURFACE MOUNT GLASS PASSIVATED SUPER FAST SILICON RECTIFIER VOLTAGE RANGE 50 - 1000 Volts CURRENT 3.0 Amperes FCM37PT FEATURES * * * * * * For surface mounted applications Low profile package Built-in strain relief Fast recovery times for high efficiency Metallurgically bonded construction Plastic package has Underwriters Laboratory Flammability Classification 94V-0 * Glass passivated junction * High temperature soldering guaranteed : 260oC/10 seconds at terminals SMC 0.125(3.17) 0.115(2.92) 0.245(6.22) 0.220(5.59) (1) (2) MECHANICAL DATA 0.280(7.11) Case: JEDEC SMC molded plastic Terminals: Solder plated, solderable per MIL-STD-750, Method 2026 Polarity: Indicated by cathode band Weight: 0.003 ounces, 0.093 gram 0.260(6.60) 0.012(0.305) 0.006(0.152) 0.103(2.62) 0.079(2.06) 0.008(0.203)(max) 0.060(1.52) 0.030(0.76) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS 0.320(8.13) 0.305(7.75) Ratings at 25oC ambient temperature unless otherwise specified. Single phase, half wave, 60 HZ, resistive or inductive load. For capacitive load, derate current by 20%. SMC Dimensions in inches and (millimeters) MAXIMUM RATINGES ( At TA = 25oC unless otherwise noted ) SYMBOL FCM31PT Maximum Recurrent Peak Reverse Voltage RATINGS VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 Volts Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 Volts o FCM32PT FCM33PT FCM34PT FCM35PT FCM36PT FCM37PT UNITS IO 3.0 Amps IFSM 100 Amps CJ 65 pF TJ, TSTG -65 to +150 Maximum Average Forward Rectified Current TL = 100 C Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Typical Junction Capacitance (Note 1) Operating and Storage Temperature Range o C ELECTRICAL CHARACTERISTICS ( At TA = 25oC unless otherwise noted ) CHARACTERISTICS SYMBOL Maximum Instantaneous Forward Voltage at 3.0 A DC Maximum DC Reverse Current @ TA = 25oC at Rated DC Blocking Voltage @ TA = 100oC Maximum Reverse Recovery Time (Note 2) NOTES : 1. Measured at 1.0 MHZ and applied reverse voltage of 4.0 volts 2. Test Conditions : IF = 0.5 A, IR = -1.0 A, IRR = -0.25 A FCM31PT FCM32PT FCM33PT FCM34PT FCM35PT FCM36PT FCM37PT VF UNITS 1.3 Volts 5.0 uAmps IR 50 trr 150 uAmps 250 500 nSec 2002-5 RATING CHARACTERISTIC CURVES ( FCM31PT THRU FCM37PT ) 3.0 2.5 2.0 1.5 1.0 Single Half Wave 60HZ Resistive or Inductive Load 0.5 0 0 25 50 75 100 125 LEAD TEMPERATURE, ( oC ) 150 175 PEAK FORWARD SURGE CURRENT, ( A ) AVERAGE FORWARD CURRENT, (A) FIG. 1 - TYPICAL FORWARD CURRENT DERATING CURVE FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 140 120 8.3ms Single Half Sine-Wave (JEDEC Method) 100 80 60 40 20 0 1 FIG. 3 - TYPICAL REVERSE CHARACTERISTICS PER BRIDGE ELEMENT 5 10 20 NUMBER OF CYCLES AT 60 Hz 50 100 FIG. 4 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 20 INSTANTANEOUS FORWARD CURRENT, ( A ) 100 TJ =100oC 10 1.0 TJ =25oC .1 10 Pulse Width = 300uS 1% Duty Cycle 3.0 1.0 0.3 TJ =25oC 0.1 .03 .01 .01 0 20 40 60 80 100 120 140 0 PERCENT OF RATED PEAK REVERSE VOLTAGE, ( % ) 0.3 0.5 0.7 FIG. 5 - TYPICAL JUNCTION CAPACITANCE 100 60 40 20 10 TJ =25oC 6 4 2 1 .1 .2 .4 0.9 1.1 1.3 1.5 INSTANTANEOUS FORWARD VOLTAGE, ( V ) 200 JUNCTION CAPACITANCE, ( pF ) INSTANTANEOUS REVERSE CURRENT, (uA) 2 1.0 2 4 10 20 REVERSE VOLTAGE, ( V ) 40 100 1.7