High Power SPDT RF Switch JSW2-63VHDRP+ RF Switch with internal driver Single Supply Voltage, +2.3V to +5.5V The Big Deal • • • • • High power handling, 2.5W @2 GHz High IIP3, +75 dBm Low insertion loss, 0.4 dB Fast switching, 2µs Tiny Size, 2x2mm CASE STYLE: MT2140 Product Overview Mini-Circuits’ JSW2-63VHDRP+ is a reflective symmetric MMIC SPDT switch with an internal CMOS driver designed for wideband operation from 5 to 6000 MHz. This model provides power handling up to 2.5W with low insertion loss, high dynamic range, and fast switching speed in a tiny 2x2mm 12-Lead MCLP package. JSW2-63VHDRP+ operates on a single positive supply voltage with low current consumption of just 120µA. Produced using a Silicon-on-Insulator process, it provides a high level of ESD protection and excellent repeatability. The switching logic for this model sets the switch from COM to RF1 with control voltage in the low state and COM to RF2 with control voltage in the high state. Alternative model (JSW2-63VHDRG+) is also available with opposite switching logic for your convenience. Key Features Feature Advantages Wideband, 5 to 6000 MHz One model can be used in many applications, saving component count. Also ideal for wideband applications such as military and instrumentation. High power and low loss • 2.5W power handling @ 2 GHz • 0.4 dB insertion loss Supports applications with a range of power requirements with excellent transmission of signal power from input to output. High Isolation • 68 dB at 100 MHz • 20 dB at 5000 MHz High isolation significantly reduces leakage of power into OFF ports. High linearity, • +75 dBm IIP3 • +115 dBm IIP2 High linearity minimizes unwanted intermodulation products which are difficult or impossible to filter in multi-carrier environments, or in the presence of strong interfering signal from adjacent circuitry or received by antenna. Built-in CMOS driver Eliminates the need for an external driver, saving PCB space and cost. Tiny size, 2 x 2mm QFN package Tiny footprint saves space in dense layouts while providing low inductance, repeatable transitions, and excellent thermal contact to the PCB. Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] Page 1 of 5 High Power SPDT RF Switch 50Ω 5 - 6000 MHz RF Switch with internal driver Single Supply Voltage, +2.3V to +5.5V Product Features • High Power, 2.5W at 2 GHz • Low insertion loss, 0.4 dB typ. at 3 GHz • High IIP3, 75 dBm typ. from 100-6000 MHz • Low current consumption, 120 µA typ. • Immune to latch up JSW2-63VHDRP+ CASE STYLE: MT2140 Typical Applications +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications • Defense • Communication Infrastructure • Test and Measurements General Description JSW2-63VHDRP+ is a high power reflective symmetric SPDT switch with integral CMOS driver, operates with single positive supply voltage while consuming, 120 µA typical. It has been designed for wide band operation. It is packaged in a tiny 2x2 mm, 12-lead package and is rated MSL1 and passes 1KV for ESD (HBM). Simplified Schematic and Pad Description Function Pad Number RF COM 5 RF common/ SUM port* RF1 8 RF OUT #1 / IN port* RF2 2 RF OUT #2 / IN port* Control 10 CMOS Control IN LS 11 Connect to Pad 12 via R1, connect to ground via R2 VDD 12 Supply DGND 9 Digital Ground Description Notes A. Performance and quality attributes and conditions in this specification documentRF are Ground intended to be excluded and do not form a part of this specification document. GNDnot expressly stated 1,3,4,6,7, Paddle B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled *Must beFor held at statement 0Vdc. If required, add DC blocking to prevent DC on these ports. to the rights and benefits contained therein. a full of the Standard Terms and the capacitors exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] REV. A M161454 JSW2-63VHDRP+ RS/CP 180329 Page 2 of 5 JSW2-63VHDRP+ SPDT RF Switch RF Electrical Specifications1, TAMB=25°C, VDD= +2.3 to +5.5V, 50 Ohms Parameter Condition (MHz) Min. Frequency Range 5 — — — — — — — — 42 33 27 22 18 15 — 40 32 26 22 18 15 2nd Harmonic5 +18 dBm Pin, 17-204 MHz +32 dBm Pout, 850/900 MHz +32 dBm Pout, 1800/1900 MHz +18 dBm Pin, 17-204 MHz 0.23 0.25 0.3 0.4 0.5 0.65 0.9 68 44 35 29 24 20 17 61 41 33 28 24 20 16 33 28 21 20 18 16 13 -92 -99 -101 -125 3rd Harmonic5 +32 dBm Pout, 850/900 MHz -93 +32 dBm Pout, 1800/1900 MHz -87 Insertion Loss2,4 (ON STATE) Isolation between Common Port and RF1/RF2 Ports Isolation between RF1 and RF2 Ports Return Loss4 (ON STATE) IIP2 IIP3 Input 0.1dB Compression point3 5 - 100 100 - 1000 1000 - 2000 2000 - 3000 3000 - 4000 4000 - 5000 5000 - 6000 5 - 100 100 - 1000 1000 - 2000 2000 - 3000 3000 - 4000 4000 - 5000 5000 - 6000 5 - 100 100 - 1000 1000 - 2000 2000 - 3000 3000 - 4000 4000 - 5000 5000 - 6000 5 - 100 100 - 1000 1000 - 2000 2000 - 3000 3000 - 4000 4000 - 5000 5000 - 6000 Typ. 5 96 17 105 100 - 6000 115 5 75 17 81 5 - 6000 75 5 - 100 33 100 - 6000 34 Max. Units 6000 — 0.35 0.4 0.5 0.7 0.9 1.25 — — — — — — — — — — — — — — MHz 119 θjA dB dB dB dB dBm dBm dBm dBm dBm °C/W Notes: 1. Tested on Mini-Circuits’ test board TB-948+ (see Characterization test circuit, Fig.1). 2. Insertion loss values are de-embedded from test board loss. 3. 0.1dB compression is a linearity measure and not meant for continuous operation. See Figure 2 for max operating power. 4. Insertion loss and return loss are improved by external matching. Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] Page 3 of 5 JSW2-63VHDRP+ SPDT RF Switch DC Electrical Specifications Parameter Supply voltage, VDD Min. Typ. Max. 2.3 3.3 5.5 V 120 200 µA Supply current Units Control voltage Low 0 0 0.5 V Control voltage High 1.2 1.5 3.3 V Switching Specifications Parameter Typ. Max. Switching time 50% control to 90% RF or 10% RF Condition Min. 2 4 Video feed-through (control 0 to 1.5V, RF freq.=10 kHz, VDD=3.3V) 26 Units µSec mVP-P Absolute Maximum Ratings5 Parameter Ratings Operating temperature -40°C to +85°C Storage temperature -65°C to 150°C VDD, Supply voltage +2.3 to 5.5V Voltage control 0V Min., 3.3 Max. RF Input power, CW 5-100 MHz 33 dBm 100-6000 MHz 34 dBm 5. Operation of this device above any of these conditions may cause permanent damage. Truth Table (State of control voltage selects the desired switch state) RF common to State of Control Voltage RF1 High OFF ON Low ON OFF ON- low insertion loss state RF2 OFF- Isolation State Characterization / Application Circuits PowerDerating (Over-40 to 85°C) 50 Ohms Power (Over -40 to 85°C), 50 Ohms 38 37 Input Power (dBm) 36 35 34 33 32 31 30 Typ P1dB 29 28 Max RF P0.1dB 27 26 25 Figure 1. Block Diagram of test Circuit used for characterization (DUT, R1&R2 soldered on Mini-Circuit’s TB-948+) R1=2.21kΩ R2=3.32kΩ (can be omitted if VDD=2.3 to 3.3V) Note: 5 50 MHz 500 5000 Figure 2. Max RF( operating), P0.1dB (Typ) and P1dB (Typ) vs frequency. Cblock is required only when DC is present on RF ports. Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] Page 4 of 5 JSW2-63VHDRP+ SPDT RF Switch Product Marking 12 1 JV Additional Detailed Technical Information additional information is available on our dash board. To access this information click Performance Data here Data Table Swept Graphs Case Style MT2140 Plastic package, exposed paddle Tape & Reel F108 Standard quantities available on reel 7” reels with 20, 50, 100, 200, 500, 1000, 3000 devices Suggested Layout for PCB Design PL-505 Evaluation Board TB-948+ Environmental Ratings ENV84 ESD Rating Human Body Model (HBM): Class 1C (pass 1000V) in accordance with MIL-STD-883, Method 3015 MSL Rating Moisture Sensitivity: MSL1 in accordance with IPC/JEDEC J-STD-020D Additional Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] Page 5 of 5