ASL380 Wideband Linear Amplifier MMIC Features Description 19.2 dB Gain at 500 MHz The ASL380, a wideband linear amplifier MMIC, has a high linearity and low noise over a wide range of frequency 5 MHz to 2.6 GHz, being suitable for use in the fiber receiver, distribution amplifiers and drop amplifiers of CATV systems, and in the mobile wireless repeaters and BTS. The amplifier is available in a SOT89 package and passes through the stringent DC, RF, and reliability tests. 22 dBm P1dB at 500 MHz 41.5 dBm Output IP3 at 500 MHz 1.6 dB NF at 500 MHz 75 Input & Output Match Bandwidth 5 ~ 1200 MHz Single Supply +5 V ASL380 Package Style: SOT89 Typical Performance (Supply Voltage = +5 V, TA = +25 C, Z0 = 75 ) Application Circuit Parameters Units Typical Frequency MHz 5 50 500 860 1200 2150 Noise Figure dB 1.5 1.3 1.6 1.7 1.7 1.9 CATV & 50 ~ 1000 MHz Gain dB 21.0 19.6 19.2 18.8 17.1 16.8 CATV & 50 ~ 1002 MHz S11 dB -20 -15 -12 -12 -15 -11 S22 dB -20 -16 -18 -16 -15 -13 Output P1dB dBm 21.0 21 22 22 22.0 20 CATV & 50 ~ 1200 MHz Output IP3 dBm 41.01) 41.01) 41.51) 41.51) 40.52) 39.01) CATV & 5 ~ 200 MHz Output IP21),2),3) dBm 53 58 63 49 53 52 CSO4) dBc 60 CTB4) dBc > 70 Current mA 110 Device Voltage V +5 (Positive gain slope) 950 ~ 2150 MHz (SMATV) 50 ~ 1000 MHz (Push-Pull, 1:1 transformer) 1) OIP3 and OIP2 are measured with two tones at an output power of +5 dBm/tone separated by 1 MHz(up-link) or 6 MHz(down-link). 2) OIP3 and OIP2 are measured with two tones at an output power of +8 dBm/tone separated by 1 MHz 3) OIP2 is measured at F1+F2 Frequency. 4) Pout = 95 dBuV for 84 channels VHF signal. Product Specifications Parameters Units Min Typ. Testing Frequency MHz 500 Gain dB 19.2 S11 dB -12 S22 dB -18 Output IP3 dBm 41.5 Noise Figure dB 1.6 Output P1dB dBm 22 Current Device Voltage mA 110 V +5 Max 50 ~ 1200 MHz (Push-Pull, 1:1 transformer) CATV & 50 ~ 1002 MHz (Min. VSWR) Pin Configuration Absolute Maximum Ratings Parameters Rating Operating Case Temperature -40 to 85 C Storage Temperature -40 to 150 C Device Voltage +6 V Pin No. Function Operating Junction Temperature +150 C Input RF Power (CW, 75 matched) 1 RF IN +18 dBm Maximum Current 150 mA 2 GND Thermal Resistance 43 C/W 3 RF OUT & Bias 1/13 ASB Inc. [email protected] Tel: +82-42-528-7225 June 2017 ASL380 Wideband Linear Amplifier MMIC Outline Drawing Part No. Lot No. ASL380 Pxxxx Symbols Dimensions (In mm) MIN NOM MAX A L b b1 C D D1 E E1 e1 H S e 1.40 0.89 0.36 0.41 0.38 4.40 1.40 3.64 2.40 2.90 0.35 0.65 1.40 1.60 1.20 0.48 0.53 0.43 4.60 1.75 4.25 2.60 3.10 0.45 0.85 1.60 1.50 1.04 0.42 0.47 0.40 4.50 1.60 --2.50 3.00 0.40 0.75 1.50 Pin No. Function 1 RF IN 2 GND 3 RF OUT & Bias Mounting Recommendation (In mm) Note: 1. The number and size of ground via holes in a circuit board is critical for thermal and RF grounding considerations. 2. We recommend that the ground via holes be placed on the bottom of the lead pin 2 and exposed pad of the device for better RF and thermal performance, as shown in the drawing at the left side. ESD Classification & Moisture Sensitivity Level ESD Classification HBM Class 1B Voltage Level: 550 V MM Class A Voltage Level: 50 V CAUTION: ESD-sensitive device! Moisture Sensitivity Level (MSL) Level 3 at 260 C reflow 2/13 ASB Inc. [email protected] Tel: +82-42-528-7225 June 2017 ASL380 Wideband Linear Amplifier MMIC APPLICATION CIRCUIT CATV Frequency (MHz) 50 500 860 Noise Figure (dB) 1.3 1.6 1.7 Magnitude S21 (dB) 19.6 19.2 18.8 Magnitude S11 (dB) -15 -12 -12 Magnitude S22 (dB) -16 -18 -16 Output P1dB (dBm) 21 22 22 Output IP3 (dBm) 41.0 41.5 41.5 Output IP21),2) (dBm) 58 63 49 1) 50 ~ 1000 MHz +5 V 3) CSO (dBc) 60 CTB (dBc) 3) > 70 Device Voltage (V) +5 Current (mA) 110 1) OIP3 and OIP2 are measured with two tones at an output power of +5 dBm/tone separated by 6 MHz. 2) OIP2 is measured at F1+F2 Frequency. 3) Pout = 95 dBuV for 84 channels VHF signal. Schematic Board Layout (FR4, 40x40 mm2, 0.8T) S-parameters 25 0 20 -5 15 -10 10 S11 (dB) Gain (dB) o o -40 c o 25 c o 85 c 5 -40 c o 25 c o 85 c -15 -20 0 -25 0 100 200 300 400 500 600 700 800 900 1000 0 Frequency (MHz) 100 200 300 400 500 600 700 800 900 1000 Frequency (MHz) 0 o -40 c o 25 c o 85 c -5 S22 (dB) -10 -15 -20 -25 0 100 200 300 400 500 600 700 800 900 1000 Frequency (MHz) 3/13 ASB Inc. [email protected] Tel: +82-42-528-7225 June 2017 ASL380 Wideband Linear Amplifier MMIC Current vs. Temperature Gain vs. Temperature 200 24 22 150 Gain (dB) Current (mA) 20 100 18 16 50 Frequency = 860 MHz 14 0 -60 -40 -20 0 20 40 60 80 12 -60 100 -40 -20 0 o 20 40 60 80 Temperature ( C) P1dB vs. Temperature NF vs. Temperature 35 10 9 30 o -40 c o 25 c o 85 c 8 25 7 6 20 NF (dB) P1dB (dBm) 100 o Temperature ( C) 15 5 4 3 10 Frequency = 860 MHz 2 5 1 0 -60 0 -40 -20 0 20 40 60 80 0 100 100 200 300 o 400 500 600 700 800 900 1000 Frequency (MHz) Temperature ( C) Output IP3 vs. Tone Power (Frequency = 860 MHz) Output IP2 vs. Tone Power (Frequency = 860 MHz) MHz) 80 60 70 50 Output IP2 (dBm) Output IP3 (dBm) 60 40 30 20 o -40 c o 25 c o 85 c 10 50 40 30 o -40 c o 25 c o 85 c 20 10 0 0 4 5 6 7 8 9 10 11 12 13 14 4 5 Pout per Tone (dBm) 4/13 6 7 8 9 10 11 12 13 14 Pout per Tone (dBm) ASB Inc. [email protected] Tel: +82-42-528-7225 June 2017 ASL380 Wideband Linear Amplifier MMIC Frequency (MHz) 50 500 860 1002 Noise Figure (dB) 1.7 1.9 1.8 1.6 APPLICATION CIRCUIT Magnitude S21 (dB) 17.2 17.2 17.2 17.2 Magnitude S11 (dB) -9 -12 -16 -20 Positive gain slope Magnitude S22 (dB) -9 -20 -20 -20 CATV Output P1dB (dBm) 22 20.5 22 23 Output IP3 (dBm) 41.5 41.0 39.5 40.0 Output IP21),2) (dBm) 55 63 45 46 Device Voltage (V) +5 Current (mA) 110 1) 50 ~ 1002 MHz +5 V 1) OIP3 and OIP2 are measured with two tones at an output power of +8 dBm/tone separated by 6 MHz. 2) OIP2 is measured at F1+F2 Frequency. Schematic Board Layout (FR4, 40x40 mm2, 0.8T) S-parameters 0 25 -5 -10 15 S11 (dB) Gain (dB) 20 10 -15 -20 5 0 -25 -30 0 200 400 600 800 1000 1200 0 Frequency (MHz) 200 400 600 800 1000 1200 Frequency (MHz) 0 -5 S22 (dB) -10 -15 -20 -25 -30 0 200 400 600 800 1000 1200 Frequency (MHz) 5/13 ASB Inc. [email protected] Tel: +82-42-528-7225 June 2017 ASL380 Wideband Linear Amplifier MMIC Frequency (MHz) 50 500 1002 Noise Figure (dB) 2.3 2.4 3.3 APPLICATION CIRCUIT Magnitude S21 (dB) 18.0 17.3 16.0 Magnitude S11 (dB) -17 -16 -18 Min. VSWR Magnitude S22 (dB) -18 -18 -18 CATV Output P1dB (dBm) 21 20 21 Output IP3 (dBm) 39.5 39.5 38.5 Output IP21),2) (dBm) 54 57 55 1) 50 ~ 1002 MHz +5 V 3) CSO (dBc) 60 CTB (dBc) 3) > 70 Device Voltage (V) +5 Current (mA) 110 1) OIP3 and OIP2 are measured with two tones at an output power of +5 dBm/tone separated by 6 MHz. 2) OIP2 is measured at F1+F2 Frequency. 3) Pout = 94 dBuV for 84 channels VHF signal. Schematic Board Layout (FR4, 40x40 mm2, 0.8T) S-parameters 0 25 -5 20 S11 (dB) Gain (dB) -10 15 10 -15 -20 5 -25 -30 0 0 200 400 600 800 1000 1200 0 200 400 600 800 1000 1200 Frequency (MHz) Frequency (MHz) 0 -5 S22 (dB) -10 -15 -20 -25 -30 0 200 400 600 800 1000 1200 Frequency (MHz) 6/13 ASB Inc. [email protected] Tel: +82-42-528-7225 June 2017 ASL380 Wideband Linear Amplifier MMIC APPLICATION CIRCUIT CATV 50 ~ 1200 MHz Frequency (MHz) 50 500 1200 Noise Figure (dB) 1.6 1.8 1.7 Magnitude S21 (dB) 16.8 16.8 17.1 Magnitude S11 (dB) -10 -11 -15 Magnitude S22 (dB) -10 -18 -15 Output P1dB (dBm) 21.5 20.5 22.0 Output IP31) (dBm) 40.0 41.5 40.5 57 63 53 1),2) Output IP2 +5 V (dBm) Device Voltage (V) +5 Current (mA) 110 1) OIP3 and OIP2 are measured with two tones at an output power of +8 dBm/tone separated by 6 MHz. 2) OIP2 is measured at F1+F2 Frequency. Schematic Board Layout (FR4, 40x40 mm2, 0.8T) S-parameters 0 30 25 S11 (dB) Gain (dB) -5 20 15 -10 10 -15 5 0 -20 0 200 400 600 800 1000 1200 1400 0 200 400 600 800 1000 1200 1400 Frequency (MHz) Frequency (MHz) 0 -5 S22 (dB) -10 -15 -20 -25 0 200 400 600 800 1000 1200 1400 Frequency (MHz) 7/13 ASB Inc. [email protected] Tel: +82-42-528-7225 June 2017 ASL380 Wideband Linear Amplifier MMIC APPLICATION CIRCUIT CATV 5 ~ 200 MHz Frequency (MHz) 5 50 200 Noise Figure (dB) 1.5 1.2 1.2 Magnitude S21 (dB) 21.0 21.0 20.5 Magnitude S11 (dB) -20 -20 -18 Magnitude S22 (dB) -20 -20 -15 Output P1dB (dBm) 21.0 21.5 21.5 Output IP31) (dBm) 41.0 41.5 42.5 53 54 54 1),2) Output IP2 +5 V (dBm) Device Voltage (V) +5 Current (mA) 110 1) OIP3 and OIP2 are measured with two tones at an output power of +5 dBm/tone separated by 1 MHz. 2) OIP2 is measured at F1+F2 Frequency. Schematic Board Layout (FR4, 40x40 mm2, 0.8T) S-parameters 0 30 25 -10 S11 (dB) Gain (dB) 20 15 -20 10 -30 5 -40 0 0 50 100 150 200 250 300 0 50 100 150 200 250 300 Frequency (MHz) Frequency (MHz) 0 S22 (dB) -10 -20 -30 -40 0 50 100 150 200 250 300 Frequency (MHz) 8/13 ASB Inc. [email protected] Tel: +82-42-528-7225 June 2017 ASL380 Wideband Linear Amplifier MMIC APPLICATION CIRCUIT CATV 5 ~ 200 MHz Frequency (MHz) 5 50 200 Noise Figure (dB) 1.3 1.3 1.6 Magnitude S21 (dB) 13.5 13.6 13.1 Magnitude S11 (dB) -20 -20 -18 Magnitude S22 (dB) -20 -20 -20 Output P1dB (dBm) 13.0 13.0 14.0 Output IP31) (dBm) 34.5 34.5 35.0 46 47 46 1),2) Output IP2 +5 V (dBm) Device Voltage (V) +5 Current (mA) 110 1) OIP3 and OIP2 are measured with two tones at an output power of +0 dBm/tone separated by 1 MHz. 2) OIP2 is measured at F1+F2 Frequency. Schematic Board Layout (FR4, 40x40 mm2, 0.8T) 20 0 15 -10 S11 (dB) Gain (dB) S-parameters 10 -30 5 0 -20 -40 0 50 100 150 200 250 300 0 50 100 150 200 250 300 Frequency (MHz) Frequency (MHz) 0 -10 S22 (dB) -20 -30 -40 -50 0 50 100 150 200 250 300 Frequency (MHz) 9/13 ASB Inc. [email protected] Tel: +82-42-528-7225 June 2017 ASL380 Wideband Linear Amplifier MMIC Frequency (MHz) 950 1500 2150 Noise Figure (dB) 1.8 2.6 1.9 Magnitude S21 (dB) 17.0 16.8 16.8 Magnitude S11 (dB) -8 -5 -11 SMATV Magnitude S22 (dB) -9 -15 -13 950 ~ 2150 MHz Output P1dB (dBm) 20 19 20 Output IP31) (dBm) 42 38 39 47 45 52 APPLICATION CIRCUIT +5 V 1),2) Output IP2 (dBm) Device Voltage (V) +5 Current (mA) 110 . 1) OIP3 and OIP2 are measured with two tones at an output power of +5 dBm/tone separated by 6 MHz. 2) OIP2 is measured at F1+F2 Frequency Schematic Board Layout (FR4, 40x40 mm2, 0.8T) 20 0 15 -5 S11 (dB) Gain (dB) S-parameters 10 -10 -15 5 -20 0 0 500 1000 1500 2000 2500 0 500 1000 1500 2000 2500 Frequency (MHz) Frequency (MHz) 0 S22 (dB) -5 -10 -15 -20 0 500 1000 1500 2000 2500 Frequency (MHz) 10/13 ASB Inc. [email protected] Tel: +82-42-528-7225 June 2017 ASL380 Wideband Linear Amplifier MMIC APPLICATION CIRCUIT CATV Push-Pull 1 : 1 transformer Frequency (MHz) 50 500 860 Magnitude S21 (dB) 15.6 15.2 15.2 Magnitude S11 (dB) -17 -12 -18 Magnitude S22 (dB) -16 -11 -16 Output P1dB (dBm) 25 26 26 Output IP31) (dBm) 39.5 43.5 40.5 1),2) 72 64 55 50 ~ 1000 MHz Output IP2 Noise Figure (dB) (dBm) 2.1 2.0 2.0 +5 V Device Voltage (V) +5 Current (mA) 220 . 1) OIP3 and OIP2 are measured with two tones at an output power of +10 dBm/tone separated by 6 MHz. 2) OIP2 is measured at F1+F2 Frequency. Board Layout (FR4, 40x40 mm2, 0.8T) Schematic Note: MABA-007159 1:1 impedance transformers are used. S-parameters 20 0 -5 -10 S11 (dB) Gain (dB) 15 10 -15 5 -20 0 -25 0 100 200 300 400 500 600 700 800 900 1000 0 100 Frequency (MHz) 200 300 400 500 600 700 800 900 1000 Frequency (MHz) 0 -5 S22 (dB) -10 -15 -20 -25 0 100 200 300 400 500 600 700 800 900 1000 Frequency (MHz) 11/13 ASB Inc. [email protected] Tel: +82-42-528-7225 June 2017 ASL380 Wideband Linear Amplifier MMIC APPLICATION CIRCUIT CATV Push-Pull 1 : 1 transformer Frequency (MHz) 50 500 1200 Magnitude S21 (dB) 15.0 14.8 15.0 Magnitude S11 (dB) -15 -10 -9 Magnitude S22 (dB) -15 -10 -11 Output P1dB (dBm) 25 26 26 Output IP31) (dBm) 39.0 43.5 42.0 1),2) 76 67 66 50 ~ 1200 MHz Output IP2 Noise Figure (dB) (dBm) 2.1 2.1 2.4 +5 V Device Voltage (V) +5 Current (mA) 220 . 1) OIP3 and OIP2 are measured with two tones at an output power of +9 dBm/tone separated by 6 MHz. 2) OIP2 is measured at F1+F2 Frequency. Board Layout (FR4, 40x40 mm2, 0.8T) Schematic Note: MABA-007159 1:1 impedance transformers are used. S-parameters 0 20 -5 -10 S11 (dB) Gain (dB) 15 10 -15 5 -20 0 -25 0 200 400 600 800 1000 1200 1400 0 200 400 600 800 1000 1200 1400 Frequency (MHz) Frequency (MHz) 0 -5 S22 (dB) -10 -15 -20 -25 0 200 400 600 800 1000 1200 1400 Frequency (MHz) 12/13 ASB Inc. [email protected] Tel: +82-42-528-7225 June 2017 ASL380 Wideband Linear Amplifier MMIC Recommended Soldering Reflow Profile 260 C Ramp-up (3 C/sec) 20~40 sec Ramp-down (6 C/sec) 200 C 150 C 60~180 sec Copyright 2011-2017 ASB Inc. All rights reserved. Datasheet subject to change without notice. ASB assumes no responsibility for any errors which may appear in this datasheet. No part of the datasheet may be copied or reproduced in any form or by any means without the prior written consent of ASB. 13/13 ASB Inc. [email protected] Tel: +82-42-528-7225 June 2017