Part Number: DUR127A-A 127mm (5.0”) SEVEN SEGMENT DISPLAY www.SunLED.com Features ● 5.0 INCH DIGIT HEIGHT. LOW CURRENT OPERATION. EXCELLENT CHARACTER APPEARANCE. EASY MOUNTING ON P.C. BOARDS OR SOCKETS. I.C. COMPATIBLE. CATEGORIZED FOR LUMINOUS INTENSITY. MECHANICALLY RUGGED. STANDARD : GRAY FACE,WHITE SEGMENT. RoHS COMPLIANT. Notes: 1. All dimensions are in millimeters (inches). Operating Characteristics (TA=25°C) 2. Tolerance is ± 0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. VF 19.0 (5.7) V Forward Voltage (IF=10mA) (Max.) Per Segment Or (Dp And Comma) VF 25.0 (7.5) V Reverse Current (VR=50V(15V)) (Max.) Per Segment Or (Dp And Comma) IR 20 (10) uA Wavelength Of Peak Emission (Typ.) (IF=10mA) λP 627 nm mA Wavelength Of Dominant Emission (Typ.) (IF=10mA) λD 625 nm mW Spectral Line Full Width At HalfMaximum (Typ.) (IF=10mA) Δλ 45 nm Capacitance (Per Segment) (Typ.) (VF=0V, f=1MHz) C 15 pF Unit VR 50 (15) V DC Forward Current Per Segment Or (Dp And Comma) IF 60 (30) mA Forward Current (Peak) Per Segment Or (Dp And Comma) 1/10 Duty Cycle 0.1ms Pulse Width iFS 320 (160) Power Dissipation Per Segment Or (Dp And Comma) PT 1500 (225) Operating Temperature TA -40 ~ +85 Tstg -40 ~ +85 Reverse Voltage Per Segment Or (Dp And Comma) Storage Temperature Lead Solder Temperature [2mm Below Package Base] Part Number DUR127A-A Emitting Color Red Published Date : MAR 13,2008 Unit Forward Voltage (IF=10mA) (Typ.) Per Segment Or (Dp And Comma) UR (GaAsP/ GaP) Absolute Maximum Ratings (TA=25°C) UR (GaAsP/ GaP) °C 260°C For 3~5 Seconds Emitting Material GaAsP/GaP Luminous Intensity (IF=10mA) ucd min. typ. 18000 52290 Drawing No : SDSA0673 V4 Wavelength nm λP Description 627 Common Anode, Rt. Hand Decimal Checked : Shin Chi P.1/5 Part Number: DUR127A-A 127mm (5.0”) SEVEN SEGMENT DISPLAY www.SunLED.com UR Published Date : MAR 13,2008 Drawing No : SDSA0673 V4 Checked : Shin Chi P.2/5 Part Number: 127mm (5.0”) SEVEN SEGMENT DISPLAY www.SunLED.com Published Date : MAR 13,2008 DUR127A-A Drawing No : SDSA0673 V4 Checked : Shin Chi P.3/5 Part Number: DUR127A-A 127mm (5.0”) SEVEN SEGMENT DISPLAY www.SunLED.com Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous intensity / luminous flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : MAR 13,2008 Drawing No : SDSA0673 V4 Checked : Shin Chi P.4/5 Part Number: 127mm (5.0”) SEVEN SEGMENT DISPLAY www.SunLED.com PACKING & LABEL SPECIFICATIONS Published Date : MAR 13,2008 DUR127A-A Drawing No : SDSA0673 DUR127A-A V4 Checked : Shin Chi P.5/5