LSU425 HIGH INPUT IMPEDANCE MONOLITHIC DUAL N-CHANNEL JFET Linear Systems replaces discontinued Siliconix U425 The LSU425 is a high input impedance Monolithic Dual N-Channel JFET The LSU425 monolithic dual n-channel JFET is designed to provide very high input impedance for differential amplification and impedance matching. Among its many unique features, this series offers operating gate current specified at -500 fA. The LSU425 is a direct replacement for discontinued Siliconix U425. The hermetically sealed TO-71 & TO-78 packages are well suited for military applications. The 8 Pin P-DIP and 8 Pin SOIC provide ease of manufacturing, and the symmetrical pinout prevents improper orientation. (See Packaging Information). LSU425 Applications: Ultra Low Input Current Differential Amps High-Speed Comparators Impedance Converters ELECTRICAL CHARACTERISTICS @ 25°C (unless otherwise noted) SYMBOL CHARACTERISTICS MIN. BVGSS Breakdown Voltage 40 BVGGO Gate‐To‐Gate Breakdown 40 TRANSCONDUCTANCE YfSS Full Conduction 300 YfS Typical Operation 120 DRAIN CURRENT IDSS Full Conduction 60 GATE VOLTAGE VGS(off) Pinchoff voltage ‐‐ VGS Operating Range ‐‐ GATE CURRENT IGmax. Operating ‐‐ ‐IGmax. High Temperature ‐‐ IGSSmax. At Full Conduction ‐‐ ‐IGSSmax. High Temperature ‐‐ OUTPUT CONDUCTANCE YOSS Full Conduction ‐‐ YOS Operating ‐‐ COMMON MODE REJECTION CMR ‐20 log | ∆V GS1‐2/ ∆VDS| ‐‐ ‐20 log | ∆V GS1‐2/ ∆VDS| ‐‐ NOISE NF Figure ‐‐ en Voltage ‐‐ ‐‐ CAPACITANCE CISS Input ‐‐ CRSS Reverse Transfer ‐‐ FEATURES HIGH INPUT IMPEDANCE HIGH GAIN LOW POWER OPERATION ABSOLUTE MAXIMUM RATINGS @ 25°C (unless otherwise noted) IG = 0.25pA MAX gfs = 120µmho MIN VGS(OFF) = 2V MAX Maximum Temperatures Storage Temperature ‐65°C to +150°C Operating Junction Temperature +150°C Maximum Voltage and Current for Each Transistor – Note 1 ‐VGSS Gate Voltage to Drain or Source 40V ‐VDSO Drain to Source Voltage 40V ‐IG(f) Gate Forward Current 10mA Maximum Power Dissipation Device Dissipation @ Free Air – Total 400mW @ +125°C MATCHING CHARACTERISTICS @ 25°C UNLESS OTHERWISE NOTED SYMBOL CHARACTERISTICS VALUE UNITS CONDITIONS |∆V GS1‐2 /∆T|max. DRIFT VS. 25 µV/°C VDG=10V, ID=30µA TEMPERATURE TA=‐55°C to +125°C | V GS1‐2 | max. OFFSET VOLTAGE 15 mV VDG=10V, ID=30µA TYP. 60 ‐‐ MAX. ‐‐ ‐‐ UNITS V V CONDITIONS VDS = 0 IG =1nA IG = 1µA ID = 0 IS= 0 ‐‐ 200 1500 350 µmho µmho VDS = 10V VDG = 10V ‐‐ 1000 µA VDS = 10V VGS = 0V ‐‐ ‐‐ 2.0 1.8 V V VDS = 10V VDG = 10V ID = 1nA ID = 30µA ‐‐ ‐‐ ‐‐ ‐‐ .25 250 1.0 1.0 pA pA pA nA VDG = 10V TA = +125°C VDS = 0V TA = +125°C ‐‐ 0.1 10 3.0 µmho µmho 90 90 ‐‐ ‐‐ dB dB ‐‐ 20 10 1 70 ‐‐ dB nV/√Hz ‐‐ ‐‐ 3.0 1.5 pF pF Click To Buy VGS = 0V f = 1kHz ID = 30µA f = 1kHz ID = 30µA VGS = 20V VDS = 10V VDG = 10V VGS = 0V ID = 30µA ∆VDS = 10 to 20V ID = 30µA ∆VDS = 5 to 10V ID = 30µA VDG = 10V ID = 30µA RG = 10MΩ f = 10Hz VDG = 10V ID = 30µA f = 10Hz VDG = 10V ID = 30µA f = 1KHz VDS= 10V VGS = 0 f = 1MHz Note 1 – These ratings are limiting values above which the serviceability of any semiconductor may be impaired TO-71 / TO-78 (Top View) P-DIP / SOIC (Top View) Available Packages: LSU425 in TO-71 & TO-78 LSU425 in PDIP & SOIC LSU425 available as bare die Please contact Micross for full package and die dimensions Email: [email protected] Information furnished by Linear Integrated Systems and Micross Components is believed to be accurate and reliable. However, no responsibility is assumed for its use; nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Linear Integrated Systems.