M ICROWAVE A Division of Crystek Corporation PERFORMANCE SPECIFICATION MIN TYP MAX UNITS 200 MHz 18.0 VDC Lower Frequency: Upper Frequency: 500 Tuning Voltage: 0.5 Supply Voltage: 11.4 12.0 12.6 VDC Output Power: +2.0 +6.0 +10.0 dBm 15 25 mA Supply Current: nd MHz Harmonic Suppression (2 Harmonic): -10 -5 dBc Pushing: 0.5 1.0 MHz/V Pulling, all Phases: 1.5 3.0 MHz pk-pk Tuning Sensitivity: 20 MHz/V Phase Noise @ 10kHz offset: -98 dBc/Hz Phase Noise @ 100kHz offset: -119 dBc/Hz Load Impedance: 50 Input Capacitance: 330 pF Operating Temperature Range: -20 +70 °C Storage Temperature Range: -45 +90 °C Phase Noise (1 Hz BW, Typical) Tuning Curve (Typical) Page 1 of 2 CRYSTEK CORPORATION 12730 Commonwealth Drive • Fort Myers, Florida 33913 Phone: 239-561-3311 • 800-237-3061 Fax: 239-561-1025 • www.crystek.com M ICROWAVE A Division of Crystek Corporation SIDE VIEW Gold Finish [RF] 0.465 SQ (11.81 SQ) Solder Mask 0.030 (0.76) [Vcc] 0.220 (5.59) 0.052 (1.32) 0.025 (0.64) 13 0.315 14 0.215 15 0.115 16 0.180 0.280 0.380 11 10 9 0.000 1 0.000 TOP ORIENTATION MARK 8 0.405 7 0.305 6 0.205 5 0.105 Pad Connection 2 10 14 Others Vt RF-OUTPUT Vcc GROUND PAD LOCATION 2 3 4 0.415 0.415 12 0.315 0.500 (12.70) CRYSTEK CVCO55CW 0200-0500 YYWW 0.500 0.115 0.500 (12.70) 0.215 BOTTOM ORIENTATION MARK 0.080 0.040 (1.02) [Vt] TOP VIEW 0.100 (2.54) 0.500 BOTTOM VIEW Unless otherwise specified, Dimensions are in: IN (mm) Pad Location Dimensions are in: Inches TAPE AND REEL 0.059 Ø TYP (1.50 Ø) TYP 0.157±0.004 (4.00±0.10) DIRECTION OF FEED 0.945±0.012 (24.00±0.30) 0.630±0.004 (16.00±0.10) Drawing not to scale Product Control: Crystek Part Number: CVCO55CW-0200-0500 Release Date: 25-Jul-2013 Revision Level: F Responsible: C. Vales CRYSTEK CORPORATION Specification is subject to change without notice Page 2 of 2 12730 Commonwealth Drive • Fort Myers, Florida 33913 Phone: 239-561-3311 • 800-237-3061 Fax: 239-561-1025 • www.crystek.com