ANT-433-MHW-xxx-x DATA SHEET Product Dimensions Description MHW Series dipole antennas feature a durable, unobtrusive housing that sticks permanently with integral adhesive to flat, non-conductive surfaces such as windows, drywall, ceiling tiles, plastic, etc. The antennas are well suited to low-power devices, but are capable of operation at levels to 10 watts. The MHW is supplied with either 6.5 feet (2m) or 15 feet (4.6m) of RG-174 cable and attaches via a standard SMA or Part 15 compliant RP-SMA connector. Custom cable lengths and connectors are available for volume OEM customers. 6.54” (166.0) 0.35” (9.0) 2.61” (66.3) 1.32” (33.5) Features 0.69” (17.5) 0.28” (7.0) • • • • • • • • Compact & unobtrusive Adhesive for flat surfaces Excellent performance Omni-directional pattern Very low VSWR Two flexible shafts Rugged & damage-resistant Standard SMA or Part 15 compliant RP-SMA connector Electrical Specifications 0.31” (8.0) • • • • • • • Center Freq. Bandwidth Wavelength VSWR Impedance Connector Cable 433MHz 20MHz 1/4-wave <1.5 typ. at center 50 ohms RP-SMA or SMA 79” or 180” RG-174 coax Ordering Information • • • • ANT-433-MHW-RPS-L (RP-SMA connector, 180” coax) ANT-433-MHW-RPS-S (RP-SMA connector, 79” coax) ANT-433-MHW-SMA-L (SMA connector, 180” coax) ANT-433-MHW-SMA-S (SMA connector, 79” coax) VSWR Graph S11 SWR 1.222 CENTER 433.000MHz SPAN 200.000MHz Typical VSWR Antenna Factor 159 Ort Lane Merlin, OR 97532 www.antennafactor.com 541-956-0931 (phone) 541-471-6251 (fax) Rev 6-22-09