7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 20 RELEASED FOR PUBLICATION 6 5 4 3 2 20 LOC ES ALL RIGHTS RESERVED. BY TYCO ELECTRONICS CORPORATION. D 2.00 REF POSITION A2 C LTR A2 3 TAILS OF MATING UPM STYLE RECEPTACLE ARE OFFSET BY 0.75 mm FROM TAILS OF THIS CONNECTOR. SEE CUSTOMER DRAWING 120992 FOR RECEPTACLE EXAMPLE. SEE SPEC 114-1103 FOR MORE DETAILED DESCRIPTION OF THE TAIL OFFSETS. DATUM AND BASIC DIMENSION ESTABLISHED BY CUSTOMER. 6 MINIMUM REQUIRED PC BOARD THICKNESS IS 1.44mm. DATE DWN APVD OL 09APR2013 SZ PALLADIUM-NICKEL APPLICATION D PC BOARD HOLE SPECIFICATIONS: DRILLED HOLE SIZE: 0.700 # 0.02 mm FINISHED HOLE SIZE: 0.60 # 0.05 mm PLATING THICKNESS: 0.025 - 0.050 mm COPPER 0.004 - 0.010 mm HASL TIN 0.0005 mm MIN IMMERSION TIN 0.0002 - 0.0005 mm OSP 0.0001mm MIN IMMERSION SILVER 0.0001-0.0005 mm IMMERSION GOLD OVER 0.004-0.005 mm 5 8 DESCRIPTION CORRECT DRAFT ERROR FINISH: CONTACT MATING AREA: 0.00076 mm MIN GOLD PLATE OVER 0.00127 mm MIN NICKEL, OR 0.0005 mm MIN GOLD OVER 0.00064 mm OVER 0.00127 mm MIN NICKEL. COMPLIANT TAIL AREA: 0.0005 mm MIN MATTE TIN PLATE OVER 0.00127 mm NICKEL UNDERPLATE. 7. CONTACT AREA LUBRICATED WITH BELLCORE APPROVED LUBRICANT. GR-1217-CORE, ISSUE 1 NOVEMBER 1995. TOP SURFACE OF DAUGHTERCARD REF P 2 32.35 POSITION A1 00 MATERIAL: HOUSING: POLYESTER. COLOR: BLACK, UL 94 V-0 CONTACT: COPPER ALLOY. 3.00 REF 3.00 REF REVISIONS DIST 1 4 2.00 REF 1 NICKEL TECHNICAL REFERENCE POSITION A1 IS AT MATERIAL ID. C 0.13 REF RECEPTACLE CONNECTORS 11.50 3 MATING VERTICAL UPM RECEPTACLE PCB LAYOUT 12.00 1892711-1 SCALE 3:1 1892711-2 SCALE 3:1 -X- 5 B POSITION C2 POSITION A2 -Y- B 3.50 16.00 POSITION A2 10.00 BSC 5 19.13 0.75 RECEPTACLE MOUNTING HOLE q FOR COLUMN A POSITION A1 11.50 21.44 24.63 6.00 REF 3.00 POSITION A1 TYP 8 POSITION C1 BACKPLANE SURFACE 4.00 2.83 TYP 15.70 0.60 2.00 TYP TYP REF X Y 4 B1 C1 - - - RECOMMENDED PCB LAYOUT A 6 POSITION LOADED WITH 7.7 REF SHORT PIN THIS DRAWING IS A CONTROLLED DOCUMENT FOR TYCO ELECTRONICS CORPORATION IT IS SUBJECT TO CHANGE AND THE CONTROLLING ENGINEERING ORGANIZATION SHOULD BE CONTACTED FOR THE LATEST REVISION. DIMENSIONS: mm MATERIAL AMP 4805 REV 31MAR2000 -1 - TOLERANCES UNLESS OTHERWISE SPECIFIED: .25 .25 - 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH 2- DWN ORANDO LI APVD 23JUN2009 NAME 108-2289 WEIGHT SIZE - Customer Drawing 1892711-2 A PART NO Tyco Electronics ShangHai,P.R.China.200233 APPLICATION SPEC - 1892711-1 POSITION LOADED WITH 9.32 REF MIDDLE PIN PRODUCT SPEC 1 $ 0' ALL POSITION LOADED WITH 10.92 REF LONG PIN 23JUN2009 23JUN2009 STEVEN YAO 1892711-3 A2,B2,C2 CHK SUNY ZHAO A1,A2,B2,C2 A1,B1,C1 ASSEMBLY, RIGHT ANGLE HEADER, MINIPAK HDE, 2X3 POSITION CAGE CODE A1 00779 DRAWING NO 1892711 SCALE 5:1 SHEET 1 RESTRICTED TO OF - 1 REV A2