SAW Components SAW 2in1 filter WCDMA Diversity Band 5/Band 8 Series/Type: Ordering code: B9907 B39941B9907P810 Date: Version: February 07, 2014 2.0 EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. EPCOS AG is a TDK Group Company. SAW Components B9907 881.5/942.5 MHz SAW Filter Data Sheet Application ■ Low-loss 2-in-1 RF filter for mobile telephone Features 0.49 0.18 1 0.175 Package size 1.5 x 1.1 mm2 Max. Package height 0.45mm RoHS compatible Approx. weight 0.003g Package for Surface Mount Technology (SMT) Ni, gold-plated terminals Electrostatic Sensitive Device (ESD) Moisture Sensitive Level 3 0,39 2 3 4 10 0.075 ■ ■ ■ ■ ■ ■ ■ ■ 5 9 8 0.21 7 0.18 ■ bottom view 0,4 ■ ■ ■ WCDMA Band V and Band VIII system, receive path (Rx) Suitable for diversity applications Unbalanced to balanced operation Usable passband: Band 5:25 MHz Band 8:35 MHz Impedance transformation from 50Ω to 100Ω for both filters side view 6 0.075 1.1 1.5 top view Pin configuration ■ ■ ■ ■ ■ 1 4 6,7 8,9 2,3,5,10 9 1 Input [ Band 5 ] Input [ Band 8 ] Output balanced [ Band 8 ] Output balanced [ Band 5 ] Case ground 8 7 6 4 2,3,5,10 Please read cautions and warnings and important notes at the end of this document. 2 February 07, 2014 SAW Components B9907 881.5/942.5 MHz SAW Filter Data Sheet Characteristics of Band 5 T = –30 ˚C to +85 ˚C ZS = 50 Ω ZL = 100Ω (balanced) Temperature range for specification: Terminating source impedance: Terminating load impedance: min. typ. @ 25˚C max. fC — 881.5 — MHz — — 1.9 1.6 2.2 2.0 dB dB 894.0 MHz αmax MHz αWCDMA 1) ∆α MHz — 0.9 1.2 dB 891.6 MHz EVM — 3.1 6.0 % 869.0 ... 894.0 MHz — 1.6 2.2 869.0 ... 894.0 MHz — 1.6 2.2 Common Mode Rejection Ratio 869.0 ... 894.0 MHz 20 24 — α MHz MHz MHz αWCDMA2) MHz MHz MHz MHz MHz MHz MHz 43 43 43 20 41 40 35 33 31 31 51 49 51 27 51 45 41 41 37 37 — — — — — — — — — — Center frequency Maximum insertion attenuation 869.0 ... 894.0 @fCarrier 871.4 ... 891.6 Amplitude ripple (p-p) 869.0 ... Error Vector Magnitude 2) @fCarrier 871.4 ... Input VSWR Output VSWR Attenuation @fCarrier 1) Attenuation 10.0 824.0 826.4 914.0 954.0 979.0 1693.0 2607.0 2682.0 4325.0 ... ... ... ... ... ... ... ... ... ... 824.0 849.0 846.6 954.0 979.0 1693.0 2607.0 2682.0 4325.0 6000.0 dB dB dB dB dB dB dB dB dB dB of WCDMA signal (“Powertransferfunction”, αWCDMA) is determined by ∞ ∫∞ Sds 21 ( f )HRRC ( f – f Carrier ) 2 df fCarrier according to 3GPP TS 25.101 (e.g. for band VIII RX passband, fCarrier ranges from 871.4 MHz (lowest Rx channel) to 891.6 MHz (highest Rx channel)). HRRC(f) is the transfer function of the root-raised cosine transmit pulse shaping filter according to 3GPP TS 25.101 with the following normalization: ∞ ∫∞ HRRC ( f ) 2) Error 2 df = 1 Vector Magnitude (EVM) based on definition given in 3GPP TS 25.141. Please read cautions and warnings and important notes at the end of this document. 3 February 07, 2014 SAW Components B9907 881.5/942.5 MHz SAW Filter Data Sheet Maximum ratings of filter 1 (Band V) Storage temperature range T –40/+85 1) ˚C V DC voltage VDC 5 2) ESD voltage VESD 100 3) V 17 dBm Input Power at 824.0 ... 849.0 MHz PIN machine model, 1 pulse 2000h, 55 ˚C 1) Extended upperlimit: 168h@125˚C acc. to IEC 60068-2-2 Bb 2) 168h Damp Heat Steady State acc. to IEC 60068-2-67 Cy 3) acc. to JESD22-A115B (machine model), 10 negative & 10 positive pulses. Please read cautions and warnings and important notes at the end of this document. 4 February 07, 2014 SAW Components B9907 881.5/942.5 MHz SAW Filter Data Sheet Transfer function of filter 1 (narrrowband) Transfer function of filter 1 (wideband) Please read cautions and warnings and important notes at the end of this document. 5 February 07, 2014 SAW Components B9907 881.5/942.5 MHz SAW Filter Data Sheet Smith charts of filter 1 S11 function S22 function Please read cautions and warnings and important notes at the end of this document. 6 February 07, 2014 SAW Components B9907 881.5/942.5 MHz SAW Filter Data Sheet Characteristics of Band 8 T = –30 ˚C to +85 ˚C ZS = 50 Ω ZL = 100Ω (balanced) Temperature range for specification: Terminating source impedance: Terminating load impedance: min. typ. @ 25˚C max. fC — 942.5 — MHz — — 2.8 2.5 4.0 3.0 dB dB 960.0 MHz αmax MHz αWCDMA 1) ∆α MHz — 1.6 2.8 dB 957.6 MHz EVM — 3.9 6.0 % 925.0 ... 960.0 MHz — 1.8 2.5 925.0 ... 960.0 MHz — 1.8 2.5 Common Mode Rejection Ratio 925.0 ... 960.0 MHz 20 24 — α MHz MHz αWCDMA2) MHz MHz MHz MHz MHz MHz MHz MHz 42 42 35 20 38 34 34 30 30 30 49 48 46 25 44 40 40 36 37 36 — — — — — — — — — — Center frequency Maximum insertion attenuation 925.0 ... 960.0 @fCarrier 927.4 ... 957.6 Amplitude ripple (p-p) 925.0 ... Error Vector Magnitude 2) @fCarrier 927.4 ... Input VSWR Output VSWR Attenuation @fCarrier 1) Attenuation 10.0 882.4 880.0 980.0 1043.0 1700.0 2600.0 2682.0 4345.0 4470.0 ... ... ... ... ... ... ... ... ... ... 880.0 912.6 915.0 1043.0 1700.0 2600.0 2682.0 4345.0 4470.0 6000.0 dB dB dB dB dB dB dB dB dB dB of WCDMA signal (“Powertransferfunction”, αWCDMA) is determined by ∞ ∫∞ Sds 21 ( f )HRRC ( f – f Carrier ) 2 df fCarrier according to 3GPP TS 25.101 (e.g. for band VIII RX passband, fCarrier ranges from 927.4 MHz (lowest Rx channel) to 957.6 MHz (highest Rx channel)). HRRC(f) is the transfer function of the root-raised cosine transmit pulse shaping filter according to 3GPP TS 25.101 with the following normalization: ∞ ∫∞ HRRC ( f ) 2) Error 2 df = 1 Vector Magnitude (EVM) based on definition given in 3GPP TS 25.141. Please read cautions and warnings and important notes at the end of this document. 7 February 07, 2014 SAW Components B9907 881.5/942.5 MHz SAW Filter Data Sheet Maximum ratings of filter 2 (Band VIII) Storage temperature range T –40/+85 1) ˚C V DC voltage VDC 5 2) ESD voltage VESD 100 3) V 17 dBm Input Power at 880.0 ... 915.0 MHz PIN machine model, 1 pulse 2000h, 55 ˚C 1) Extended upperlimit: 168h@125˚C acc. to IEC 60068-2-2 Bb 2) 168h Damp Heat Steady State acc. to IEC 60068-2-67 Cy 3) acc. to JESD22-A115B (machine model), 10 negative & 10 positive pulses. Please read cautions and warnings and important notes at the end of this document. 8 February 07, 2014 SAW Components B9907 881.5/942.5 MHz SAW Filter Data Sheet Transfer function of filter 2 (narrrowband) Transfer function of filter 2 (wideband) Please read cautions and warnings and important notes at the end of this document. 9 February 07, 2014 SAW Components B9907 881.5/942.5 MHz SAW Filter Data Sheet Smith charts of filter 2 S11 function S22 function Please read cautions and warnings and important notes at the end of this document. 10 February 07, 2014 SAW Components B9907 881.5/942.5 MHz SAW Filter Data Sheet References Type B9907 Ordering code B39941B9907P810 Marking and package C61157-A8-A71 Packaging F61074-V8277-Z000 Date codes L_1126 B9907_LB_NB.s3p, B9907_LB_WB.s3p S-parameters B9907_UB_NB.s3p, B9907_UB_WB.s3p see file header for port/pin assignment table Soldering profile S_6001 RoHS compatible defined as compatible with the following documents: "DIRECTIVE 2002/95/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment. 2005/618/EC from April 18th, 2005, amending Directive 2002/95/EC of the European Parliament and of the Council for the purposes of establishing the maximum concentration values for certain hazardous substances in electrical and electronic equipment." Moldability Before using in overmolding environment, please contact your EPCOS sales office. Matching coils See http://www.tdk.co.jp/tefe02/coil.htm#aname1 http://www.tdk.co.jp/etvcl/index.htm for a large variety of matching coils. For further information please contact your local EPCOS sales office or visit our webpage at www.epcos.com . Published by EPCOS AG Systems, Acoustics, Waves Business Group P.O. Box 80 17 09, 81617 Munich, GERMANY EPCOS AG 2014. This brochure replaces the previous edition. For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices. Please read cautions and warnings and important notes at the end of this document. 11 February 07, 2014 Important notes The following applies to all products named in this publication: 1. 2. 3. 4. 5. 6. 7. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. The warnings, cautions and product-specific notes must be observed. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms of Delivery for Products and Services in the Electrical Industry” published by the German Electrical and Electronics Industry Association (ZVEI). The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CeraLink, CeraPlas, CSMP, CSSP, CTVS, DeltaCap, DigiSiMic, DSSP, FilterCap, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks. 12 February 07, 2014