Technical Data Sheet Technical Data Sheet TDS062713-LTE60 Techsil Conductive Elastomer The Leading Edge in EMI Shielding Technology LTE-60 Techsil Conductive Elastomer LTE-60 LTE-60 is a Shore A 55 durometer hardness silicone elastomer filled with nickel coated graphite particles as the conductive shielding media. This material has good shielding properties and conductivity and is particles tested within the LTE-60 is a Shore and A 55 durometer hardness silicone elastomer filled with nickel coated graphite as the parameters of MIL-DTL-83528, a conductive elastomer gasket specification governed by the DoD. This material conductive and shielding media. This material has good shielding properties and conductivity and is tested within the has excellent sealing properties at temperature extremes, is ozone resistant governed and has a 20 shelf life stored in has parameters of MIL-DTL-83528, a conductive elastomer gasket specification by year the DoD. Thisif material absence of moisture, light and sulfur. LTE-60 provides a cost and effective toshelf your life shielding gasket excellentthe sealing properties at temperature extremes, is ozone resistant has asolution 20 year if stored in the absencerequirements. of moisture,This lightmaterial and sulfur. LTE-60 provides a costparts, effective solution to die yourcutshielding requirements. can be supplied as molded extruded shapes, parts, or gasket as standard sheet This material be contact supplied asof molded parts, extruded shapes, parts, or as standard sheet stock. Please stock. can Please one the professionals at Leader Techdie for cut additional information regarding your specific contact one of the professionals at Leader Tech for additional information regarding your specific application. application. Elastomer: Filler Material: Color: Silicone Nickel Coated Graphite Dark Grey (Custom colors available upon request) Electrical Properties Test Method Volume Resistivity (ohm-cm) (as supplied) Shielding Effectiveness (db) 20 MHz 100 MHz 600 MHz 2 GHz 10 GHz Max. .100 MIL-DTL-83528 (Para. 4.5.10) MIL-DTL-83528 MIL-STD-285 (Para. 4.5.12) .200 .200 .200 .100 MIL-DTL-83528 MIL-DTL-83528 (Para. 4.5.15) (Para. 4.5.9) MIL-DTL-83528 (Para. 4.5.13) Max. .100 MIL-DTL-83528 (Para. 4.5.16) Min. Min. Max. Min. Max. 1.9 55 150 100 300 30 25 ASTM D792 ASTM D2240 ASTM D412 (MIL Para. 4.5.3) (MIL Para. 4.5.4) (MIL Para. 4.5.6) ASTM D412 (MIL Para. 4.5.6) ASTM D624 ASTM D395 (MIL Para. 4.5.8) (MIL Para. 4.5.7) Max. +160 Maximum Continuous Use Temperature Min. -55 ASTM D1329 Min. 8 NS ASTM D575 (MIL Para. 4.5.5) MIL-DTL-83528 (Para. 4.5.17) Actual 119 127 126 143 126 Electrical Stability After Heat Aging (ohm-cm) After Break (ohm-cm) During Vibration (ohm-cm) After Vibration (ohm-cm) After Exposure to EMP (ohm-cm) (0.9 KAmp/inch of Perimeter) Max. Max. Max. Physical Properties Specific Gravity Hardness (Shore A) Tensile Strength (+/-0.25) (+/-7) (PSI) Elongation (%) Tear Strength Compression Set (PPI) (%) Upper Operating Temp. (0C) Lower Operating Temp (0C) Compression Deflection Fluid Immersion (%) (MIL Para. 4.5.14) SUR=Survivable NS=Not Survivable e do A passion in all w Performance of conduc�ve elastomers varies from one applica�on to another. Leader Tech, Inc. cannot guarantee that the above speci‐ ca�ons will be met in your applica�on. If you need assistance in tes�ng your applica�on, please do not hesitate to contact Leader Tech for Global EMI Shielding Technology Center further informa�on.12420 Race Track Rd., Tampa, Florida 33626 www.LeaderTechInc.com 866.TECH.EMI (866.832.4364) t 813.855.6921 f 813.855.3291 Performance of conductive elastomers vary from one application to another. Leader Tech, Inc. cannot guarantee that the above specifications will be met in your specific application. If you need assistance in testing your application, please do not hesitate to contact Leader Tech for further information. Copyright© Leader Tech, Inc. 2013