LMH0024 LMH0024 3.3V SMPTE 259M / 344M Adaptive Cable Equalizer Literature Number: SNLS210F LMH0024 3.3V SMPTE 259M / 344M Adaptive Cable Equalizer General Description Features The LMH0024 SMPTE 259M / 344M adaptive cable equalizer is a monolithic integrated circuit for equalizing data transmitted over cable (or any media with similar dispersive loss characteristics). The equalizer operates over a wide range of data rates from 125 Mbps to 540 Mbps and supports SMPTE 259M and SMPTE 344M. The LMH0024 implements DC restoration to correctly handle pathological data conditions. DC restoration can be bypassed for low data rate applications. The equalizer is flexible in allowing either single-ended or differential input drive. Additional features include a mute pin which can be used to manually mute the output and a cable length indicator which determines the amount of cable being equalized. ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ SMPTE 259M and SMPTE 344M compliant Supports DVB-ASI at 270 Mbps Data rates: 125 Mbps to 540 Mbps Equalizes up to 350 meters of Belden 1694A at 270 Mbps Manual bypass, cable length indicator, and output mute Single-ended or differential input 50Ω differential outputs Single 3.3V supply operation Industrial temperature range: −40°C to +85°C 198 mW typical power consumption with 3.3V supply Footprint compatible with the LMH0034 and the GS9064 Applications ■ SMPTE 259M and SMPTE 344M serial digital interfaces ■ Serial digital data equalization and reception ■ Data recovery equalization Typical Application 20172501 © 2011 National Semiconductor Corporation 201725 www.national.com LMH0024 3.3V SMPTE 259M / 344M Adaptive Cable Equalizer May 16, 2011 LMH0024 Absolute Maximum Ratings (Note 1) Supply Voltage Input Voltage (all inputs) Storage Temperature Range Junction Temperature Lead Temperature (Soldering 4 Sec) Package Thermal Resistance θJA 16-pin SOIC θJC 16-pin SOIC ESD Rating (HBM) ESD Rating (MM) Recommended Operating Conditions −0.5V to 3.6V −0.3V to VCC+0.3V −65°C to +150°C +150°C Supply Voltage (VCC – VEE) Input Coupling Capacitance AEC Capacitor (Connected between AEC+ and AEC-) Operating Free Air Temperature (TA) +260°C 3.3V ±5% 1.0 µF 1.0 µF −40°C to +85°C +115°C/W +105°C/W 8 kV 250V DC Electrical Characteristics Over Supply Voltage and Operating Temperature ranges, unless otherwise specified (Note 2, Note 3). Symbol Parameter Conditions VCMIN Input Common Mode Voltage VSDI Input Voltage Swing VCMOUT Output Common Mode Voltage VSDO Output Voltage Swing 50Ω load, differential CLI DC Voltage 0m cable, (Note 7) Reference Min SDI, SDI At LMH0024 input, (Note 4, Note 6) 720 SDO, SDO CLI Min to mute outputs MUTE 800 Supply Current www.national.com (Note 8) V 950 mVP−P V 750 mVP-P 2.5 V 2.0 V 3.0 V 60 2 Units VCC – VSDO/2 Max to force outputs active ICC Max 1.9 Max cable, (Note 7) MUTE Input Voltage Typ 2.0 V 77 mA LMH0024 AC Electrical Characteristics Over Supply Voltage and Operating Temperature ranges, unless otherwise specified (Note 3). Symbol Parameter BRMIN Minimum Input Data Rate BRMAX Maximum Input Data Rate Maximum Equalized Cable Length (with equalizer pathological) tr,tf Conditions Reference Min SDI, SDI Typ Max 125 Units Mbps 540 Mbps 270 Mbps, Belden 1694A, 0.2UI output jitter, (Note 4) 350 m 270 Mbps, Belden 8281, 0.2UI output jitter, (Note 4) 280 m 540 Mbps, Belden 1694A, 0.2UI output jitter, (Note 4) 250 m 540 Mbps, Belden 8281, 0.2UI output jitter, (Note 4) 180 m Output Rise Time, Fall Time 20% – 80%, (Note 4) Mismatch in Rise/Fall Time (Note 4) tOS Output Overshoot ROUT Output Resistance RLIN Input Return Loss (Note 9) RIN Input Resistance single-ended CIN Input Capacitance single-ended, (Note 5) SDO, SDO 100 220 ps 2 15 ps (Note 4) 1 5 % single-ended, (Note 5) 50 Ω 18-20 dB 1.3 kΩ 1 pF SDI, SDI 15 Note 1: "Absolute Maximum Ratings" are those parameter values beyond which the life and operation of the device cannot be guaranteed. The stating herein of these maximums shall not be construed to imply that the device can or should be operated at or beyond these values. The table of "Electrical Characteristics" specifies acceptable device operating conditions. Note 2: Current flow into device pins is defined as positive. Current flow out of device pins is defined as negative. All voltages are stated referenced to VEE = 0 Volts. Note 3: Typical values are stated for VCC = +3.3V and TA = +25°C. Note 4: Specification is guaranteed by characterization. Note 5: Specification is guaranteed by design. Note 6: The maximum input voltage swing assumes a nonstressing, DC-balance signal; specifically, the SMPTE-recommended color bar test signal. Pathological or other stressing signals may not be used. This specification is for 0m cable only. Note 7: Input signal must be present for valid CLI. Refer to Figure 1 for typical results. Note 8: Supply current depends on the amount of cable being equalized. The current is highest for short cable and decreases as the cable length is increased. Refer to Figure 2. Note 9: Input return loss is dependent on board design. The LMH0024 meets this specification on the SD024 evaluation board from 5MHz to 1.5GHz. 3 www.national.com LMH0024 Connection Diagram 20172503 16-Pin SOIC Order Number LMH0024MA See NS Package Number M16A Pin Descriptions Pin # Name Description 1 CLI Cable length indicator. Provides a voltage inversely proportional to the cable length being equalized. 2 VCC Positive power supply (+3.3V). 3 VEE Negative power supply (ground). 4 SDI Serial data true input. 5 SDI Serial data complement input. 6 VEE Negative power supply (ground). 7 AEC+ AEC loop filter external capacitor (1µF) positive connection. 8 AEC- AEC loop filter external capacitor (1µF) negative connection. 9 BYPASS Bypasses equalization and DC restoration when high. No equalization occurs in this mode. 10 NC No connect. 11 VEE Negative power supply (ground). 12 SDO Serial data complement output. 13 SDO Serial data true output. 14 VEE Negative power supply (ground). 15 VCC Positive power supply (+3.3V). 16 MUTE Output mute. To force SDO and SDO to mute, tie to VCC. To disable MUTE, tie to GND. Typical application is MUTE tied to GND to enable the outputs. MUTE must be tied either high or low; it may not be left unconnected. www.national.com 4 LMH0024 Block Diagram 20172502 Device Operation 2.6 2.5 BLOCK DESCRIPTION The Equalizer Filter block is a multi-stage adaptive filter. If Bypass is high, the equalizer filter is disabled. The DC Restoration / Level Control block receives the differential signals from the equalizer filter block. This block incorporates a self-biasing DC restoration circuit to fully DC restore the signals. If Bypass is high, this function is disabled. The signals before and after the DC Restoration / Level Control block are used to generate the Automatic Equalization Control (AEC) signal. This control signal sets the gain and bandwidth of the equalizer filter. The loop response in the AEC block is controlled by an external 1µF capacitor placed across the AEC+ and AEC- pins. Cable Length Indicator (CLI) is derived from this block. The Output Driver produces SDO and SDO. SDO and SDO may be forced to mute by activating MUTE. CLI (V) 2.4 2.3 2.2 2.1 2.0 1.9 1.8 0 50 100 150 200 250 300 350 BELDEN 1694A CABLE LENGTH (m) 20172504 FIGURE 1. CLI vs. Belden 1694A Cable Length CABLE LENGTH INDICATOR (CLI) The cable length indicator provides a voltage to indicate the length of cable being equalized. The CLI voltage decreases as the cable length increases. Figure 1 shows the typical CLI voltage vs. Belden 1694A cable length. Note: CLI is only valid when an input signal is present. MUTE MUTE can be used to manually mute or enable the LMH0024 outputs. MUTE must be tied to a low-level input or ground for SDO and SDO to be active. Applying a high input to MUTE will mute the LMH0024 outputs. INPUT INTERFACING The LMH0024 accepts either differential or single-ended input. The input must be AC coupled. Transformer coupling is not supported. 5 www.national.com LMH0024 The LMH0024 correctly handles equalizer pathological signals for standard definition serial digital video, as described in SMPTE RP 178. supply current vs. Belden 1694A cable length for 270 Mbps data. OUTPUT INTERFACING The SDO and SDO outputs are internally loaded with 50Ω. They produce a 750 mVP-P differential output, or a 375 mVP-P single-ended output. Application Information PCB LAYOUT RECOMMENDATIONS Please refer to the following Application Note for the CLC034 on National's website: AN-1372, “LMH0034 PCB Layout Techniques.” The PCB layout techniques in this application note apply to the LMH0024 as well. REPLACING THE GENNUM GS9064 The LMH0024 is footprint compatible with the Gennum GS9064. Pin 16 (MUTE) of the LMH0024 must be connect to ground for correct operation. 20172515 SUPPLY CURRENT VS. CABLE LENGTH The supply current (ICC) depends on the amount of cable being equalized. The current is highest for short cable and decreases as the cable length is increased. Figure 2 shows www.national.com FIGURE 2. Supply Current vs. Belden 1694A Cable Length, 270 Mbps 6 LMH0024 Physical Dimensions inches (millimeters) unless otherwise noted 16-Pin SOIC Order Number LMH0024MA NS Package Number M16A 7 www.national.com LMH0024 3.3V SMPTE 259M / 344M Adaptive Cable Equalizer Notes For more National Semiconductor product information and proven design tools, visit the following Web sites at: www.national.com Products Design Support Amplifiers www.national.com/amplifiers WEBENCH® Tools www.national.com/webench Audio www.national.com/audio App Notes www.national.com/appnotes Clock and Timing www.national.com/timing Reference Designs www.national.com/refdesigns Data Converters www.national.com/adc Samples www.national.com/samples Interface www.national.com/interface Eval Boards www.national.com/evalboards LVDS www.national.com/lvds Packaging www.national.com/packaging Power Management www.national.com/power Green Compliance www.national.com/quality/green Switching Regulators www.national.com/switchers Distributors www.national.com/contacts LDOs www.national.com/ldo Quality and Reliability www.national.com/quality LED Lighting www.national.com/led Feedback/Support www.national.com/feedback Voltage References www.national.com/vref Design Made Easy www.national.com/easy www.national.com/powerwise Applications & Markets www.national.com/solutions Mil/Aero www.national.com/milaero PowerWise® Solutions Serial Digital Interface (SDI) www.national.com/sdi Temperature Sensors www.national.com/tempsensors SolarMagic™ www.national.com/solarmagic PLL/VCO www.national.com/wireless www.national.com/training PowerWise® Design University THE CONTENTS OF THIS DOCUMENT ARE PROVIDED IN CONNECTION WITH NATIONAL SEMICONDUCTOR CORPORATION (“NATIONAL”) PRODUCTS. NATIONAL MAKES NO REPRESENTATIONS OR WARRANTIES WITH RESPECT TO THE ACCURACY OR COMPLETENESS OF THE CONTENTS OF THIS PUBLICATION AND RESERVES THE RIGHT TO MAKE CHANGES TO SPECIFICATIONS AND PRODUCT DESCRIPTIONS AT ANY TIME WITHOUT NOTICE. NO LICENSE, WHETHER EXPRESS, IMPLIED, ARISING BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. TESTING AND OTHER QUALITY CONTROLS ARE USED TO THE EXTENT NATIONAL DEEMS NECESSARY TO SUPPORT NATIONAL’S PRODUCT WARRANTY. EXCEPT WHERE MANDATED BY GOVERNMENT REQUIREMENTS, TESTING OF ALL PARAMETERS OF EACH PRODUCT IS NOT NECESSARILY PERFORMED. NATIONAL ASSUMES NO LIABILITY FOR APPLICATIONS ASSISTANCE OR BUYER PRODUCT DESIGN. BUYERS ARE RESPONSIBLE FOR THEIR PRODUCTS AND APPLICATIONS USING NATIONAL COMPONENTS. PRIOR TO USING OR DISTRIBUTING ANY PRODUCTS THAT INCLUDE NATIONAL COMPONENTS, BUYERS SHOULD PROVIDE ADEQUATE DESIGN, TESTING AND OPERATING SAFEGUARDS. EXCEPT AS PROVIDED IN NATIONAL’S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, NATIONAL ASSUMES NO LIABILITY WHATSOEVER, AND NATIONAL DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY RELATING TO THE SALE AND/OR USE OF NATIONAL PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. LIFE SUPPORT POLICY NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS PRIOR WRITTEN APPROVAL OF THE CHIEF EXECUTIVE OFFICER AND GENERAL COUNSEL OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein: Life support devices or systems are devices which (a) are intended for surgical implant into the body, or (b) support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in a significant injury to the user. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system or to affect its safety or effectiveness. National Semiconductor and the National Semiconductor logo are registered trademarks of National Semiconductor Corporation. All other brand or product names may be trademarks or registered trademarks of their respective holders. Copyright© 2011 National Semiconductor Corporation For the most current product information visit us at www.national.com National Semiconductor Americas Technical Support Center Email: [email protected] Tel: 1-800-272-9959 www.national.com National Semiconductor Europe Technical Support Center Email: [email protected] National Semiconductor Asia Pacific Technical Support Center Email: [email protected] National Semiconductor Japan Technical Support Center Email: [email protected] IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications. TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Applications Audio www.ti.com/audio Communications and Telecom www.ti.com/communications Amplifiers amplifier.ti.com Computers and Peripherals www.ti.com/computers Data Converters dataconverter.ti.com Consumer Electronics www.ti.com/consumer-apps DLP® Products www.dlp.com Energy and Lighting www.ti.com/energy DSP dsp.ti.com Industrial www.ti.com/industrial Clocks and Timers www.ti.com/clocks Medical www.ti.com/medical Interface interface.ti.com Security www.ti.com/security Logic logic.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Power Mgmt power.ti.com Transportation and Automotive www.ti.com/automotive Microcontrollers microcontroller.ti.com Video and Imaging RFID www.ti-rfid.com OMAP Mobile Processors www.ti.com/omap Wireless Connectivity www.ti.com/wirelessconnectivity TI E2E Community Home Page www.ti.com/video e2e.ti.com Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2011, Texas Instruments Incorporated