Fairchild HCPL0611 The hcpl06xx optocouplers consist of an algaas led, optically coupled to a very high speed integrated photo-detector logic gate with a strobable output (single channel devices). Datasheet

HCPL0600, HCPL0601, HCPL0611,
HCPL0637, HCPL0638, HCPL0639
High Speed-10 MBit/s Logic Gate Optocouplers
Single Channel: HCPL0600, HCPL0601, HCPL0611
Dual Channel: HCPL0637, HCPL0638, HCPL0639
Features
Description
■ Compact SO8 package
The HCPL06XX optocouplers consist of an AlGaAS
LED, optically coupled to a very high speed integrated
photo-detector logic gate with a strobable output (single
channel devices). The devices are housed in a compact
small-outline package. This output features an open collector, thereby permitting wired OR outputs. The
HCPL0600, HCPL0601 and HCPL0611 output consists
of bipolar transistors on a bipolar process while the
HCPL0637, HCPL0638, and HCPL0639 output consists
of bipolar transistors on a CMOS process for reduced
power consumption. The coupled parameters are guaranteed over the temperature range of -40°C to +85°C.
An internal noise shield provides superior common
mode rejection.
■
■
■
■
■
■
■
Very high speed-10 MBit/s
Superior CMR
Logic gate output
Strobable output (single channel devices)
Wired OR-open collector
U.L. recognized (File # E90700)
IEC60747-5-2 approved (VDE option)
– HCPL0600, HCPL0601, HCPL0611 only
Applications
■ Ground loop elimination
■ LSTTL to TTL, LSTTL or 5-volt CMOS
■ Line receiver, data transmission
■ Data multiplexing
■ Switching power supplies
■ Pulse transformer replacement
■ Computer-peripheral interface
Package Dimensions
SEATING PLANE
0.164 (4.16)
0.144 (3.66)
Pin 1
0.202 (5.13)
0.182 (4.63)
0.019 (0.48)
0.010 (0.25)
0.006 (0.16)
0.143 (3.63)
0.123 (3.13)
0.021 (0.53)
0.011 (0.28)
0.008 (0.20)
0.003 (0.08)
0.244 (6.19)
0.224 (5.69)
0.050 (1.27)
TYP
Lead Coplanarity : 0.004 (0.10) MAX
Note:
All dimensions are in inches (millimeters)
©2006 Fairchild Semiconductor Corporation
HCPL06XX Rev. 1.0.8
www.fairchildsemi.com
HCPL06XX — High Speed-10 MBit/s Logic Gate Optocouplers
April 2009
+ 1
8 VCC
V
F1
+ 2
V
7 VE
_ 2
6 VO
_
7 V01
F
_
3
3
6 V02
VF2
5 GND
N/C 4
+ 4
5 GND
Dual-channel circuit drawing
(HCPL0637, HCPL0638 and HCPL0639)
Single-channel circuit drawing
(HCPL0600, HCPL0601 and HCPL0611)
Truth Table (Positive Logic)
Input
Enable
Output
H
H
L
L
H
H
H
L
H
L
L
H
H*
NC*
L*
L*
NC*
H*
*Dual channel devices or single channel devices with pin 7 not connected.
A 0.1µF bypass capacitor must be connected between pins 8 and 5. (See note 1)
©2006 Fairchild Semiconductor Corporation
HCPL06XX Rev. 1.0.8
www.fairchildsemi.com
2
HCPL06XX — High Speed-10 MBit/s Logic Gate Optocouplers
8 VCC
N/C 1
Symbol
Parameter
Value
Units
TSTG
Storage Temperature
-40 to +125
°C
TOPR
Operating Temperature
-40 to +85
°C
50
mA
5.5
V
5.0
V
45
mW
7.0
V
Single Channel
50
mA
Dual Channel
15
EMITTER
IF
DC/Average Forward Input Current
(each channel)
Single Channel
VE
Enable Input Voltage
Not to exceed VCC by more than 500mV
Single Channel
VR
Reverse Input Voltage (each channel)
PI
Power Dissipation
Dual Channel
Single Channel
Dual Channel
DETECTOR
Supply Voltage
VCC
(1 minute max)
IO
Output Current (each channel)
VO
Output Voltage (each channel)
PO
Collector Output Power Dissipation
7.0
V
Single Channel
85
mW
Dual Channel
85
Recommended Operating Conditions
The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended
operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not
recommend exceeding them or designing to absolute maximum ratings.
Symbol
Parameter
Min.
Max.
Units
IFL
Input Current, Low Level
0
250
µA
IFH
Input Current, High Level
*6.3
15
mA
VCC
Supply Voltage, Output
4.5
5.5
V
VEL
Enable Voltage, Low Level
Single Channel only
0
0.8
V
VEH
Enable Voltage, High Level
Single Channel only
2.0
VCC
V
-40
+85
°C
Single Channel
8
TTL Loads
Dual Channel
5
TA
Operating Temperature
N
Fan Out (TTL load)
RL
Output Pull-up
330
4K
Ω
*6.3mA is a guard banded value which allows for at least 20% CTR degradation. Initial input current threshold value is
5.0mA or less
©2006 Fairchild Semiconductor Corporation
HCPL06XX Rev. 1.0.8
www.fairchildsemi.com
3
HCPL06XX — High Speed-10 MBit/s Logic Gate Optocouplers
Absolute Maximum Ratings (No derating required up to 85°C)
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be
operable above the recommended operating conditions and stressing the parts to these levels is not recommended.
In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability.
The absolute maximum ratings are stress ratings only.
Individual Component Characteristics
Symbol
Parameter
Test Conditions
Min.
Typ.*
Max.
Unit
1.8
V
EMITTER
VF
Input Forward Voltage
IF = 10mA
Input Reverse Breakdown Voltage
IR = 10µA
Input Diode Temperature Coefficient
IF = 10mA
High Level Supply Current
IF = 0mA,
VCC = 5.5V
VE = 0.5 V Single Channel
IF = 10mA,
VCC = 5.5V
VE = 0.5 V Single Channel
TA = 25°C
BVR
∆VF/∆TA
1.75
5.0
V
-1.5
mV/°C
DETECTOR
ICCH
ICCL
Low Level Supply Current
10
Dual Channel
mA
15
13
Dual Channel
mA
21
IEL
Low Level Enable Current
VCC = 5.5V, VE = 0.5V
Single Channel
-1.6
mA
IEH
High Level Enable Current
VCC = 5.5V, VE = 2.0V
Single Channel
-1.6
mA
VEH
High Level Enable Voltage
VCC = 5.5V, IF = 10mA
Single Channel
VEL
Low Level Enable Voltage
VCC = 5.5V, IF = 10mA(2)
Single Channel
2.0
V
0.8
V
Switching Characteristics (TA = -40°C to +85°C, VCC = 5 V, IF = 7.5 mA unless otherwise specified.)
Symbol
TPLH
TPHL
AC Characteristics
Test Conditions
Propagation Delay Time
to Output High Level
RL = 350Ω, CL =
Propagation Delay Time
to Output Low Level
RL = 350Ω, CL = 15pF(4)
|TPHL-TPLH| Pulse Width Distortion
15pF(3)
TA = 25°C
Device
Min.
All
20
Typ. Max. Unit
75
(Fig. 20)
ns
100
TA = 25°C
All
25
75
(Fig. 20)
ns
100
RL = 350Ω, CL = 15pF (Fig. 20)
All
35
tr
Output Rise Time (10-90%) RL = 350Ω, CL = 15pF(5) (Fig. 20)
Single Ch
50
Dual Ch
17
tf
Output Fall Time (90-10%)
RL = 350Ω, CL = 15pF(6) (Fig. 20)
Single Ch
12
Dual Ch
5
ns
ns
ns
tELH
Enable Propagation Delay
Time to Output High Level
IF = 7.5mA, VEH = 3.5V, RL = 350Ω,
CL = 15pF(7) (Fig. 21)
HCPL0600
HCPL0601
HCPL0611
20
ns
tEHL
Enable Propagation Delay
Time to Output Low Level
IF = 7.5mA, VEH = 3.5V, RL = 350Ω,
CL = 15 pF(8) (Fig. 21)
HCPL0600
HCPL0601
HCPL0611
20
ns
Common Mode
Transient Immunity
(at Output High Level)
RL = 350Ω, TA =25°C,
IF = 0mA,
VOH (Min.) = 2.0 V(9)
(Fig. 22, 23)
|VCM| = 10V
HCPL0600
HCPL0637
|VCM| = 50V
HCPL0601
HCPL0638
|CMH|
V/µs
5000
|VCM| = 1,000V HCPL0611 10,000
HCPL0639 25,000
|CMH|
Common Mode
Transient Immunity
(at Output Low Level)
RL = 350Ω, TA =25°C,
IF = 7.5mA,
VOL (Max.) = 0.8 V(10)
(Fig. 22, 23)
|VCM| = 10V
HCPL0600
HCPL0637
|VCM| = 50V
HCPL0601
HCPL0638
V/µs
5000
|VCM| = 1,000V HCPL0611 10,000
HCPL0639 25,000
©2006 Fairchild Semiconductor Corporation
HCPL06XX Rev. 1.0.8
www.fairchildsemi.com
4
HCPL06XX — High Speed-10 MBit/s Logic Gate Optocouplers
Electrical Characteristics (TA = -40°C to +85°C unless otherwise specified.)
Symbol
DC Characteristics
Test Conditions
Min.
Typ.*
Max.
Unit
IOH
High Level Output Current
VCC = 5.5V, VO = 5.5 V, IF = 250µA,
VE = 2.0V(2)
100
µA
VOL
Low Level Output Voltage
VCC = 5.5V, IF = 5mA, VE = 2.0V,
IOL = 13mA(2)
0.6
V
IFT
Input Threshold Current
VCC = 5.5V, VO = 0.6V, VE = 2.0V,
IOL = 13mA
5
mA
Isolation Characteristics (TA = -40°C to +85°C unless otherwise specified.)
Symbol
II-O
Characteristics
Test Conditions
Min.
Typ.*
Max.
Unit
1.0*
µA
Input-Output
Insulation Leakage Current
Relative humidity = 45%,
TA = 25°C, t = 5s,
VI-O = 3000 VDC(11)
VISO
Withstand Insulation Test Voltage
RH < 50%, TA = 25°C,
II-O ≤ 2µA, t = 1 min.(11)
RI-O
Resistance (Input to Output)
VI-O = 500V(11)
1012
Ω
1MHz(11)
0.6
pF
CI-O
Capacitance (Input to Output)
f=
3750
VRMS
*All typical values are at VCC = 5 V, TA = 25°C
Notes:
1. The VCC supply to each optoisolator must be bypassed by a 0.1µF capacitor or larger. This can be either a ceramic
or solid tantalum capacitor with good high frequency characteristic and should be connected as close as possible
to the package VCC and GND pins of each device.
2. Enable Input – No pull up resistor required as the device has an internal pull up resistor.
3. tPLH – Propagation delay is measured from the 3.75mA level on the HIGH to LOW transition of the input current
pulse to the 1.5V level on the LOW to HIGH transition of the output voltage pulse.
4. tPHL – Propagation delay is measured from the 3.75mA level on the LOW to HIGH transition of the input current
pulse to the 1.5V level on the HIGH to LOW transition of the output voltage pulse.
5. tr – Rise time is measured from the 90% to the 10% levels on the LOW to HIGH transition of the output pulse.
6. tf – Fall time is measured from the 10% to the 90% levels on the HIGH to LOW transition of the output pulse.
7. tELH – Enable input propagation delay is measured from the 1.5V level on the HIGH to LOW transition of the input
voltage pulse to the 1.5V level on the LOW to HIGH transition of the output voltage pulse.
8. tEHL – Enable input propagation delay is measured from the 1.5V level on the LOW to HIGH transition of the input
voltage pulse to the 1.5V level on the HIGH to LOW transition of the output voltage pulse.
9. CMH – The maximum tolerable rate of rise of the common mode voltage to ensure the output will remain in the high
state (i.e., VOUT > 2.0V). Measured in volts per microsecond (V/µs).
10. CML – The maximum tolerable rate of fall of the common mode voltage to ensure the output will remain in the low
output state (i.e., VOUT < 0.8V). Measured in volts per microsecond (V/µs).
11. Device considered a two-terminal device: Pins 1, 2, 3 and 4 shorted together, and Pins 5, 6, 7 and 8 shorted
together.
©2006 Fairchild Semiconductor Corporation
HCPL06XX Rev. 1.0.8
www.fairchildsemi.com
5
HCPL06XX — High Speed-10 MBit/s Logic Gate Optocouplers
Transfer Characteristics (TA = -40°C to +85°C unless otherwise specified.)
Fig. 1 Forward Current vs. Input Forward Voltage
Fig. 2 Output Voltage vs. Forward Current
100
6
5
10
Vo – OUTPUT VOLTAGE (V)
IF – FORWARD CURRENT (mA)
TA = 25°C
VCC = 5V
TA = 85°C
TA = -40°C
TA = 70°C
1
TA = 25°C
TA = 0°C
0.1
0.01
4
RL = 350Ω
3
RL = 1kΩ
2
1
0
0.001
0.9
1.0
1.1
1.2
1.3
1.4
1.5
1.6
0
1.7
VF – FORWARD VOLTAGE (V)
2
3
4
5
IF – FORWARD INPUT CURRENT (mA)
Fig. 4 High Level Output Current vs. Temperature
Fig. 3 Input Threshold Current vs. Temperature
16
IOH – HIGH LEVEL OUTPUT CURRENT (µA)
5
ITH – INPUT THRESHOLD CURRENT (mA)
1
VCC = 5V
VO = 0.6V
4
3
RL = 350Ω
2
RL = 1KΩ
1
14
12
10
8
6
4
VO = VCC = 5.5V
VE = 2V
IF = 250µA
2
0
0
-40
-20
0
20
40
60
80
-40
100
©2006 Fairchild Semiconductor Corporation
HCPL06XX Rev. 1.0.8
-20
0
20
40
60
80
100
TA – TEMPERATURE (˚C)
TA – TEMPERATURE (˚C)
www.fairchildsemi.com
6
HCPL06XX — High Speed-10 MBit/s Logic Gate Optocouplers
Typical Performance Curves (HCPL0600, HCPL0601 and HCPL0611 only)
Fig. 5 Low Level Output Voltage vs. Temperature
Fig. 6 Low Level Output Current vs. Temperature
60
0.8
CC
= 5.5V
IOL – LOW LEVEL OUTPUT CURRENT (mA)
VOL – LOW LEVEL OUTPUT VOLTAGE (V)
V
VE = 2V
IF = 5mA
0.7
0.6
0.5
IO = 12.8mA
0.4
IO = 16mA
0.3
IO = 6.4mA
0.2
IO = 9.6mA
0.1
V
CC
= 5V
VE = 2V
VOL = 0.6V
55
50
IF = 10-15mA
45
40
IF = 5mA
35
30
25
20
0.0
-40
-20
0
20
40
60
80
-40
100
-20
0
Fig. 7 Propagation Delay vs. Temperature
40
60
80
100
Fig. 8 Propagation Delay vs. Pulse Input Current
100
90
V
CC
= 5V
V
TP – PROPAGATION DELAY (ns)
IF = 7.5mA
90
TP – PROPAGATION DELAY (ns)
20
TA – TEMPERATURE (˚C)
TA – TEMPERATURE (˚C)
80
tPLH
RL = 1kΩ
70
60
tPLH
RL = 350Ω
50
tPHL
RL = 350Ω & 1kΩ
40
CC
= 5V
TA = 25°C
80
tPLH
RL = 1kΩ
70
60
tPLH
RL = 350Ω
50
40
tPHL
RL = 350Ω & 1kΩ
30
30
20
20
-40
-20
0
20
40
60
80
100
5
©2006 Fairchild Semiconductor Corporation
HCPL06XX Rev. 1.0.8
7
9
11
13
15
IF – PULSE INPUT CURRENT (mA)
TA – TEMPERATURE (˚C)
www.fairchildsemi.com
7
HCPL06XX — High Speed-10 MBit/s Logic Gate Optocouplers
Typical Performance Curves (HCPL0600, HCPL0601 and HCPL0611 only)
Fig. 9 Typical Enable Propagation Delay vs. Temparature
Fig. 10 Typical Rise and Fall Time vs. Temperature
240
90
CC
= 5V
V
70
CC
= 5V
IF = 7.5mA
200
tELH
RL = 1kΩ
tf – FALL TIME (ns)
tE – ENABLE PROPAGATION DELAY (ns)
V
VEH = 3V
VEL = 0V
IF = 7.5mA
80
60
50
tELH
RL = 350Ω
40
30
tr
RL = 1kΩ
160
120
80
tr
RL = 350Ω
tEHL
RL = 350Ω & 1kΩ
20
40
tf
RL = 350Ω & 1kΩ
10
0
0
-40
-20
0
20
40
60
80
100
-40
-20
TA – TEMPERATURE (˚C)
0
20
40
60
80
100
TA – TEMPERATURE (˚C)
Fig. 11 Typical Pulse Width Distortion vs. Temperature
40
PWD – PULSE WIDTH DISTORTION (ns)
V
CC
= 5V
IF = 7.5mA
35
30
25
RL = 1kΩ
20
15
10
RL = 350Ω
5
0
-40
-20
0
20
40
60
80
100
TA – TEMPERATURE (˚C)
©2006 Fairchild Semiconductor Corporation
HCPL06XX Rev. 1.0.8
www.fairchildsemi.com
8
HCPL06XX — High Speed-10 MBit/s Logic Gate Optocouplers
Typical Performance Curves (HCPL0600, HCPL0601 and HCPL0611 only)
Fig. 13 Input Threshold Current vs. Ambient Temperature
Fig. 12 Input Forward Current vs. Forward Voltage
2.5
ITH – INPUT THRESHOLD CURRENT (mA)
IF – FORWARD CURRENT (mA)
100
10
TA = 100°C
1
TA = -40°C
TA = 85°C
0.1
TA = 0°C
TA = 25°C
0.01
0.001
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
1.6
VCC = 5.5V
VO = 0.6V
2.0
RL = 350Ω
1.5
1.0
RL = 1kΩ
RL = 4kΩ
0.5
0.0
-40
1.7
-20
VF – FORWARD VOLTAGE (V)
Fig. 14 High Level Output Current vs.
Ambient Temperature
IOL – LOW LEVEL OUTPUT CURRENT (mA)
IOH – HIGH LEVEL OUTPUT CURRENT (nA)
40
60
80
100
40
VO = VCC = 5.5V
VE = 2V (Single Channel Only)
IF = 250 µA
12
8
4
0
-40
-20
0
20
40
60
80
V
35
CC
30
25
20
15
10
-40
100
= 5.5V
VE = 2V (Single Channel Only)
VOL = 0.6V
IF = 5 – 15mA
-20
0
TA – AMBIENT TEMPERATURE (°C)
60
80
100
80
100
70
CC
V
= 5.5V
PWD – PULSE WIDTH DISTORTION (ns)
V
VE = 2V (Single Channel Only)
IF = 5mA
0.4
IO = 16mA
IO = 12.8mA
0.3
0.2
IO = 6.4mA
IO = 9.6mA
0.1
0.0
-40
40
Fig. 17 Pulse Width Distortion vs.
Ambient Temperature
0.6
0.5
20
TA – AMBIENT TEMPERATURE (°C)
Fig. 16 Low Level Output Voltage vs.
Ambient Temperature
VOL – LOW LEVEL OUTPUT VOLTAGE (V)
20
Fig. 15 Low Level Output Current vs.
Ambient Temperature
20
16
0
TA – AMBIENT TEMPERATURE (°C)
60
CC
= 5V
IF = 7.5mA
50
RL = 4kΩ
40
30
20
RL = 1kΩ
RL = 350Ω
10
0
-20
0
20
40
60
80
-40
100
©2006 Fairchild Semiconductor Corporation
HCPL06XX Rev. 1.0.8
-20
0
20
40
60
TA – AMBIENT TEMPERATURE (°C)
TA – AMBIENT TEMPERATURE (°C)
www.fairchildsemi.com
9
HCPL06XX — High Speed-10 MBit/s Logic Gate Optocouplers
Typical Performance Curves (HCPL0637, HCPL0638 and HCPL0639 only)
Fig. 18 Propagation Delay vs.
Ambient Temperature
Fig. 19 Rise and Fall Times vs.
Ambient Temperature
120
CC
V
= 5V
IF = 7.5mA
300
CC
= 5V
IF = 7.5mA
6
80
tPLH
tPLH
RL = 4kΩ
RL = 1kΩ
60
40
tPLH
5
200
4
3
150
tf – RL = 350Ω, 1kΩ, 4kΩ
2
100
RL = 350Ω
tPHL
250
tr – RL = 1kΩ
RL = 350Ω, 1kΩ, 4kΩ
20
1
50
tr – RL = 350Ω
0
0
0
-40
-20
0
20
40
60
80
-40
100
TA – AMBIENT TEMPERATURE (°C)
©2006 Fairchild Semiconductor Corporation
HCPL06XX Rev. 1.0.8
tf – FALL TIME (ns)
tr – RL = 4kΩ
tr – RISE TIME (ns)
TP – PROPAGATION DELAY (ns)
100
7
350
V
-20
0
20
40
60
80
100
TA – AMBIENT TEMPERATURE (°C)
www.fairchildsemi.com
10
HCPL06XX — High Speed-10 MBit/s Logic Gate Optocouplers
Typical Performance Curves (HCPL0637, HCPL0638 and HCPL0639 only)
Pulse Gen.
ZO = 50 Ω
tf = tr = 5 ns
+5V
I F = 7.5 mA
Dual Channel
IF
1
2
Input
Monitor
(IF)
47Ω
VCC
.1µf
7
Bypass
3
6
4
GND 5
VCC 8
1
8
RL
Output
(VO)
2
7
3
6
Output VO
Monitoring
Node
0.1µF
Bypass
RM
CL
t PHL
RL
Input
Monitoring
Node
CL*
4
GND
I F = 3.75 mA
Input
(I F)
+5 V
5
tPLH
Output
(VO )
1.5 V
90%
Output
(VO )
10%
tf
Test Circuit for HCPL0600,
HCPL0601 and HCPL0611
tr
Test Circuit for HCPL0637,
HCPL0638 and HCPL0639
Fig. 20 Test Circuit and Waveforms for tPLH, tPHL, tr and tf.
Pulse
Generator
tr = 5ns
Z O = 50Ω
Input
Monitor
(V E)
+5V
3.0 V
Input
(VE )
VCC
1
8
2
7
3
6
4
5
1.5 V
t EHL
7.5 mA
.1µf
bypass
t ELH
Output
(VO )
RL
1.5 V
Output
(VO )
CL
GND
Fig. 21 Test Circuit tEHL and tELH.
©2006 Fairchild Semiconductor Corporation
HCPL06XX Rev. 1.0.8
www.fairchildsemi.com
11
HCPL06XX — High Speed-10 MBit/s Logic Gate Optocouplers
Pulse Gen.
tf = tr = 5 ns
ZO = 50 Ω
HCPL06XX — High Speed-10 MBit/s Logic Gate Optocouplers
VCC
IF
A
1
8
2
7
3
6
+5V
0.1µf
bypass
350Ω
B
VFF
4
GND
Output
(VO)
5
VCM
Pulse Gen
Test Circuit for HCPL0600, HCPL0601, and HCPL0611
Peak
VCM
0V
CM H
5V
Switching Pos. (A), IF = 0
VO
VO (Min)
VO (Max)
Switching Pos. (B), IF = 7.5 mA
VO
0.5 V
CM L
Fig. 22 Test Circuit Common Mode Transient Immunity
(HCPL0600, HCPL0601 and HCPL0611)
©2006 Fairchild Semiconductor Corporation
HCPL06XX Rev. 1.0.8
www.fairchildsemi.com
12
Dual Channel
B
A
+3.3V
VCC 8
1
RL
2
7
3
6
VFF
GND
4
0.1µF
Bypass
Output VO
Monitoring
Node
5
VCM
+
–
Pulse
Generator
ZO = 50 Ω
Test Circuit for HCPL0637, HCPL0638 and HCPL0639
VCM
0V
Peak
CM H
3.3V
Switching Pos. (A), IF = 0
VO
VO (Min)
VO (Max)
Switching Pos. (B), IF = 7.5 mA
VO
0.5 V
CM L
Fig. 23 Test Circuit Common Mode Transient Immunity
(HCPL0637, HCPL0638 and HCPL0639)
©2006 Fairchild Semiconductor Corporation
HCPL06XX Rev. 1.0.8
www.fairchildsemi.com
13
HCPL06XX — High Speed-10 MBit/s Logic Gate Optocouplers
IF
HCPL06XX — High Speed-10 MBit/s Logic Gate Optocouplers
8-Pin Small Outline
0.024 (0.61)
0.060 (1.52)
0.275 (6.99)
0.155 (3.94)
0.050 (1.27)
©2006 Fairchild Semiconductor Corporation
HCPL06XX Rev. 1.0.8
www.fairchildsemi.com
14
HCPL06XX — High Speed-10 MBit/s Logic Gate Optocouplers
Ordering Information
Option
No Suffix
Order Entry Identifier
Description
HCPL0600
Shipped in tubes (50 units per tube)
V*
HCPL0600V
IEC60747-5-2 approval
R2
HCPL0600R2
Tape and Reel (2500 units per reel)
HCPL0600R2V
IEC60747-5-2 approval, Tape and Reel (2500 units per reel)
R2V*
*Available for HCPL0600, HCPL0601, HCPL0611 only.
Marking Information
1
600
V
3
X YY S
4
2
6
5
Definitions
1
Fairchild logo
2
Device number
3
VDE mark indicates IEC60747-5-2 approval
(Note: Only appears on parts ordered with VDE option –
See order entry table)
4
One digit year code, e.g., ‘3’
5
Two digit work week ranging from ‘01’ to ‘53’
6
Assembly package code
©2006 Fairchild Semiconductor Corporation
HCPL06XX Rev. 1.0.8
www.fairchildsemi.com
15
8.0 ± 0.10
3.50 ± 0.20
2.0 ± 0.05
0.30 MAX
Ø1.5 MIN
4.0 ± 0.10
1.75 ± 0.10
5.5 ± 0.05
12.0 ± 0.3
8.3 ± 0.10
5.20 ± 0.20
0.1 MAX
6.40 ± 0.20
Ø1.5 ± 0.1/-0
User Direction of Feed
©2006 Fairchild Semiconductor Corporation
HCPL06XX Rev. 1.0.8
www.fairchildsemi.com
16
HCPL06XX — High Speed-10 MBit/s Logic Gate Optocouplers
Carrier Tape Specifications
HCPL06XX — High Speed-10 MBit/s Logic Gate Optocouplers
Reflow Profile
Temperature (°C)
TP
260
240
TL
220
200
180
160
140
120
100
80
60
40
20
0
Max. Ramp-up Rate = 3°C/S
Max. Ramp-down Rate = 6°C/S
tP
Tsmax
tL
Preheat Area
Tsmin
ts
120
240
360
Time 25°C to Peak
Time (seconds)
Profile Freature
Pb-Free Assembly Profile
Temperature Min. (Tsmin)
150°C
Temperature Max. (Tsmax)
200°C
Time (tS) from (Tsmin to Tsmax)
60–120 seconds
Ramp-up Rate (tL to tP)
3°C/second max.
Liquidous Temperature (TL)
217°C
Time (tL) Maintained Above (TL)
60–150 seconds
Peak Body Package Temperature
260°C +0°C / –5°C
Time (tP) within 5°C of 260°C
30 seconds
Ramp-down Rate (TP to TL)
6°C/second max.
Time 25°C to Peak Temperature
©2006 Fairchild Semiconductor Corporation
HCPL06XX Rev. 1.0.8
8 minutes max.
www.fairchildsemi.com
17
Auto-SPM™
Build it Now™
CorePLUS™
CorePOWER™
CROSSVOLT™
CTL™
Current Transfer Logic™
EcoSPARK®
EfficentMax™
EZSWITCH™*
™*
®
®
Fairchild
®
Fairchild Semiconductor
FACT Quiet Series™
FACT®
FAST®
FastvCore™
FETBench™
FlashWriter®*
FPS™
F-PFS™
FRFET®
SM
Global Power Resource
Green FPS™
Green FPS™ e-Series™
Gmax™
GTO™
IntelliMAX™
ISOPLANAR™
MegaBuck™
MICROCOUPLER™
MicroFET™
MicroPak™
MillerDrive™
MotionMax™
Motion-SPM™
OPTOLOGIC®
OPTOPLANAR®
®
PDP SPM™
Power-SPM™
PowerTrench®
PowerXS™
Programmable Active Droop™
QFET®
QS™
Quiet Series™
RapidConfigure™
™
Saving our world, 1mW/W/kW at a time™
SmartMax™
SMART START™
SPM®
STEALTH™
SuperFET™
SuperSOT™-3
SuperSOT™-6
SuperSOT™-8
SupreMOS™
SyncFET™
Sync-Lock™
®
*
The Power Franchise®
TinyBoost™
TinyBuck™
TinyLogic®
TINYOPTO™
TinyPower™
TinyPWM™
TinyWire™
TriFault Detect™
TRUECURRENT™*
µSerDes™
UHC®
Ultra FRFET™
UniFET™
VCX™
VisualMax™
XS™
* Trademarks of System General Corporation, used under license by Fairchild Semiconductor.
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE
RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR
CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE
SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN,
WHICH COVERS THESE PRODUCTS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE
EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used herein:
1. Life support devices or systems are devices or systems which, (a) are
intended for surgical implant into the body or (b) support or sustain life,
and (c) whose failure to perform when properly used in accordance
with instructions for use provided in the labeling, can be reasonably
expected to result in a significant injury of the user.
2. A critical component in any component of a life support, device, or
system whose failure to perform can be reasonably expected to
cause the failure of the life support device or system, or to affect its
safety or effectiveness.
ANTI-COUNTERFEITING POLICY
Fairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external website, www.fairchildsemi.com,
under Sales Support.
Counterfeiting of semiconductor parts is a growing problem in the industry. All manufacturers of semiconductor products are experiencing counterfeiting of their parts.
Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed applications,
and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the proliferation of
counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild Distributors who are
listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors are genuine parts, have
full traceability, meet Fairchild's quality standards for handling and storage and provide access to Fairchild's full range of up-to-date technical and product information.
Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address any warranty issues that may arise. Fairchild will not provide
any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global problem and encourage our
customers to do their part in stopping this practice by buying direct or from authorized distributors.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Datasheet Identification
Product Status
Advance Information
Formative / In Design
Preliminary
First Production
No Identification Needed
Full Production
Obsolete
Not In Production
Definition
Datasheet contains the design specifications for product development. Specifications may change in
any manner without notice.
Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild
Semiconductor reserves the right to make changes at any time without notice to improve design.
Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes
at any time without notice to improve the design.
Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor.
The datasheet is for reference information only.
Rev. I40
©2006 Fairchild Semiconductor Corporation
HCPL06XX Rev. 1.0.8
www.fairchildsemi.com
18
HCPL06XX — High Speed-10 MBit/s Logic Gate Optocouplers
TRADEMARKS
The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not
intended to be an exhaustive list of all such trademarks.