ON MBRB20100CTG Switchmodeâ ¢ power rectifier d2pak surface mount power package Datasheet

MBRB20100CT
Preferred Device
SWITCHMODE
Power Rectifier
D2PAK Surface Mount Power Package
The D2PAK Power Rectifier is a state−of−the−art device that
employs the use of the Schottky Barrier principle with a platinum
barrier metal.
http://onsemi.com
Features
•
•
•
•
•
•
•
•
•
SCHOTTKY BARRIER
RECTIFIER
20 AMPERES
100 VOLTS
Package Designed for Power Surface Mount Applications
Center−Tap Configuration
Guardring for Stress Protection
Low Forward Voltage
175°C Operating Junction Temperature
Epoxy Meets UL 94 V−0 @ 0.125 in
Short Heat Sink Tab Manufactured − Not Sheared!
Similar in Size to Industry Standard TO−220 Package
Pb−Free Packages are Available
1
4
3
Mechanical Characteristics
• Case: Epoxy, Molded, Epoxy Meets UL 94 V−0
• Weight: 1.7 Grams (Approximately)
• Finish: All External Surfaces Corrosion Resistant and Terminal
•
•
•
Leads are Readily Solderable
Lead and Mounting Surface Temperature for Soldering Purposes:
260°C Max. for 10 Seconds
Device Meets MSL1 Requirements
ESD Ratings: Machine Model, C >400 V
Human Body Model, 3B >8000 V
4
1
D2PAK
CASE 418B
STYLE 3
3
MARKING DIAGRAM
MAXIMUM RATINGS (Per Leg)
Symbol
Value
Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
Rating
VRRM
VRWM
VR
100
V
Average Rectified Forward Current
(Rated VR, TC = 110°C) Total Device
IF(AV)
10
20
A
Peak Repetitive Forward Current (Rated
VR, Square Wave, 20 kHz, TC = 100°C)
IFRM
20
A
Non−Repetitive Peak Surge Current
(Surge Applied at Rated Load Conditions
Halfwave, Single Phase, 60 Hz)
IFSM
150
A
Peak Repetitive Reverse Surge Current
(2.0 s, 1.0 kHz)
IRRM
0.5
A
Storage Temperature Range
Tstg
−65 to +175
°C
Operating Junction Temperature (Note 1)
TJ
−65 to +175
°C
Voltage Rate of Change (Rated VR)
dv/dt
10,000
V/s
Maximum ratings are those values beyond which device damage can occur.
Maximum ratings applied to the device are individual stress limit values (not
normal operating conditions) and are not valid simultaneously. If these limits are
exceeded, device functional operation is not implied, damage may occur and
reliability may be affected.
1. The heat generated must be less than the thermal conductivity from
Junction−to−Ambient: dPD/dTJ < 1/RJA.
 Semiconductor Components Industries, LLC, 2006
February, 2006 − Rev. 6
1
AY WW
B20100G
AKA
A
Y
WW
B20100
G
AKA
= Assembly Location
= Year
= Work Week
= Device Code
= Pb−Free Package
= Diode Polarity
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 2 of this data sheet.
Preferred devices are recommended choices for future use
and best overall value.
Publication Order Number:
MBRB20100CT/D
MBRB20100CT
THERMAL CHARACTERISTICS (Per Leg)
Characteristic
Thermal Resistance,
Junction−to−Case
Junction−to−Ambient (Note 2)
Symbol
Value
Unit
RJC
RJA
2.0
50
°C/W
ELECTRICAL CHARACTERISTICS (Per Leg)
Maximum Instantaneous Forward Voltage (Note 3)
(iF = 10 Amp, TC = 125°C)
(iF = 10 Amp, TC = 25°C)
(iF = 20 Amp, TC = 125°C)
(iF = 20 Amp, TC = 25°C)
vF
0.75
0.85
0.85
0.95
V
Maximum Instantaneous Reverse Current (Note 3)
(Rated dc Voltage, TJ = 125°C)
(Rated dc Voltage, TJ = 25°C)
iR
6.0
0.1
mA
2. When mounted using minimum recommended pad size on FR−4 board.
3. Pulse Test: Pulse Width = 300 s, Duty Cycle ≤ 2.0%.
ORDERING INFORMATION
Package
Shipping†
MBRB20100CT
D2PAK
50 Units / Rail
MBRB20100CTG
D2PAK
50 Units / Rail
Device
(Pb−Free)
MBRB20100CTT4
MBRB20100CTT4G
D2PAK
800 Units / Tape & Reel
D2PAK
(Pb−Free)
800 Units / Tape & Reel
50
TJ = 150°C
I R, REVERSE CURRENT (mA)
125°C
20
150°C
10
100°C
5
TJ = 25°C
3
10
TJ = 125°C
TJ = 100°C
1
0.1
1
0.01
0.5
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1
TJ = 25°C
0
20
40
60
80
100
120
vF, INSTANTANEOUS VOLTAGE (VOLTS)
VR, REVERSE VOLTAGE (VOLTS)
Figure 1. Typical Forward Voltage Per Diode
Figure 2. Typical Reverse Current Per Diode
32
20
RATED VOLTAGE
APPLIED
28
24
18
AVERAGE POWER (WATTS)
I F(AV), AVERAGE FORWARD CURRENT (AMPS)
i F, INSTANTANEOUS FORWARD CURRENT (AMPS)
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
RJC = 2°C/W
20
16
SQUARE
WAVE
12
8
DC
4
IPK/IAV = 5
TJ = 125°C
16
PI
IPK/IAV = 10
14
12
IPK/IAV = 20
10
SQUARE
WAVE
8
6
DC
4
2
0
80
90
100
110
120
130
140
TC, CASE TEMPERATURE (°C)
150
160
Figure 3. Typical Current Derating, Case, Per Leg
0
0
2
4
6
8
10
12
14
AVERAGE CURRENT (AMPS)
16
18
20
Figure 4. Average Power Dissipation & Average Current
http://onsemi.com
2
MBRB20100CT
PACKAGE DIMENSIONS
D2PAK
CASE 418B−04
ISSUE J
NOTES:
1. DIMENSIONING AND TOLERANCING
PER ANSI Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. 418B−01 THRU 418B−03 OBSOLETE,
NEW STANDARD 418B−04.
C
E
V
W
−B−
4
DIM
A
B
C
D
E
F
G
H
J
K
L
M
N
P
R
S
V
A
1
2
S
3
−T−
SEATING
PLANE
K
W
J
G
D
H
3 PL
0.13 (0.005)
M
T B
M
INCHES
MIN
MAX
0.340 0.380
0.380 0.405
0.160 0.190
0.020 0.035
0.045 0.055
0.310 0.350
0.100 BSC
0.080
0.110
0.018 0.025
0.090
0.110
0.052 0.072
0.280 0.320
0.197 REF
0.079 REF
0.039 REF
0.575 0.625
0.045 0.055
STYLE 3:
PIN 1. ANODE
2. CATHODE
3. ANODE
4. CATHODE
VARIABLE
CONFIGURATION
ZONE
N
R
P
U
L
L
M
M
L
M
F
F
F
VIEW W−W
1
VIEW W−W
2
VIEW W−W
3
SOLDERING FOOTPRINT*
8.38
0.33
1.016
0.04
10.66
0.42
5.08
0.20
3.05
0.12
17.02
0.67
SCALE 3:1
mm inches
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
http://onsemi.com
3
MILLIMETERS
MIN
MAX
8.64
9.65
9.65 10.29
4.06
4.83
0.51
0.89
1.14
1.40
7.87
8.89
2.54 BSC
2.03
2.79
0.46
0.64
2.29
2.79
1.32
1.83
7.11
8.13
5.00 REF
2.00 REF
0.99 REF
14.60 15.88
1.14
1.40
MBRB20100CT
SWITCHMODE is a trademark of Semiconductor Components Industries, LLC.
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 61312, Phoenix, Arizona 85082−1312 USA
Phone: 480−829−7710 or 800−344−3860 Toll Free USA/Canada
Fax: 480−829−7709 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
ON Semiconductor Website: http://onsemi.com
Order Literature: http://www.onsemi.com/litorder
Japan: ON Semiconductor, Japan Customer Focus Center
2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051
Phone: 81−3−5773−3850
http://onsemi.com
4
For additional information, please contact your
local Sales Representative.
MBRB20100CT/D
Similar pages