FR201G DC COMPONENTS CO., LTD. R THRU RECTIFIER SPECIALISTS FR207G TECHNICAL SPECIFICATIONS OF FAST RECOVERY GLASS PASSIVATED RECTIFIER VOLTAGE RANGE - 50 to 1000 Volts CURRENT - 2.0 Amperes FEATURES * * * * * * High reliability Low leakage Low forward voltage drop High current capability High switching capability Glass passivated junction DO-15 MECHANICAL DATA * * * * * * Case: Molded plastic Epoxy: UL 94V-0 rate flame retardant Lead: MIL-STD-202E, Method 208 guaranteed Polarity: Color band denotes cathode end Mounting position: Any Weight: 0.38 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) SYMBOL FR201G FR202G FR203G FR204G FR205G FR206G FR207G UNITS Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS Voltage VRMS 35 50 70 100 140 200 280 400 420 600 560 800 700 1000 Volts Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at T A = 55 oC Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum Instantaneous Forward Voltage at 2.0A DC Maximum DC Reverse Current at Rated DC Blocking Voltage T A = 25 oC VDC IO 2.0 Amps I FSM 70 Amps VF 1.3 Volts 5.0 uAmps 100 uAmps IR Maximum Full Load Reverse Current Average, Full Cycle .375*(9.5mm) lead length at T L = 55 oC Maximum Reverse Recovery Time (Note 1) trr Typical Junction Capacitance (Note 2) CJ 25 T J , T STG -65 to + 150 Operating and Storage Temperature Range Volts 150 250 500 nSec pF 0 C NOTES : 1. Test Conditions: IF = 0.5A, IR = 1.0A, IRR = 0.25A 2. Measured at 1 MHZ and applied reverse voltage of 4.0 volts 128 NEXT EXIT BACK NEXT EXI BACK EXIT NEXT BACK RATING AND CHARACTERISTIC CURVES ( FR201G THRU FR207G ) DC COMPONENTS CO., LTD. R 129 NEXT EXIT BACK NEXT EXI BACK EXIT NEXT BACK