ModSTACK Datasheet: B6I+B6I 690/1100-300G M, S Preliminary Data Key Data 3 x 277A AC at 690V AC, aircooled General Information Stack with IGBT, heatsinks, capacitors, drivers and sensors for several inverter applications. These are only technical data! Please read heedful the complete documentation and attend the adopted design environment! Especially the EMC environment and the controller functionality. Topology Load Type Cooling Targed Application Extra Drivercore Monitors Module (Unit1) Module (Unit2) Interface Standards IGBT IGBT Product ID (eupec) Drawing No. Circuit Diagram No. B6I + DC Link + B6I Resistive, inductive load Forced air, fan excluded Wind Available in Master [M] or Slave [S] Configuration. Also available with 20ms Shorttime Overload at Unit 2 [TSSa] Opt. Resistors for Sinewavefilters Scale Driver Current-, Voltage-, Temperature-Monitoring 3x FF600R17KF6C 3x FF800R17KF6C Electrical, opt. optical EN50178, UL94, prepared for UL508C Master 22902 Slave 22903 Master [TSSa] 24255 Slave [TSSa] 24256 37001450MB [mit TSSa] 37001637MB 57000001 Unit1 (LSC) Unit2 (MSC) Electrical Data Assumed Linevoltage DC Link Voltage DC Link Overvoltage Shutdown DC Link Current Parameter For IsolationManagement Min VLine 690 VDC 1100 VDCmax Within 100µs B6I+B6I690-1100-300G.doc Typ IDCLink 1 of 10 - Max VRMS 1219 Vav V ADC 2004-10-28 ModSTACK Datasheet: B6I+B6I 690/1100-300G M, S Preliminary Data Voltage Unit1 Continious Current Unit1 Shorttime Current Unit1 Pulse Current Unit1 DC Current at Unit1 690 VUnit1 IUnit1 ϑ=ϑair_inlet 10s, every 180s, initial load = IUnit1 Sinehalfwave 20ms No rotating field, ϑ=ϑair_inlet, Overcurrent Shutdown Percentage of IUnit1. Within 15µs Unit1 Switching Freq. Unit1 Power Losses Unit1 V=Vunit1_min, I=IUnit1, fsw=fsw1 Depending on Voltage Unit2 Continious Current Unit2 Controller ϑ=ϑair_inlet, ϑchip <= 125°C fUnit2>5Hz 170 VRMS ARMS IUnit1_10 210 ARMS IUnit1_DC 0,4* IUnit1 Apeak Aav 150 % fsw1 Ploss1 2319 2250 Hz W VUnit2 690 VRMS IUnit2 277 ARMS Shorttime Current Unit2 ϑair_inlet<=40°C, 10s, every 180s, initial load = IUnit2 IUnit2_10 327 ARMS Pulse Current Unit2 Sinehalfwave 20ms, starting from IUnit2. Only [TSS] Version No rotating field, ϑ=ϑair_inlet, IUnit2peak 1250 Apeak IUnit2_DC 0,4* IUnit2 ADC DC Current at Unit2 Overcurrent Shutdown Percentage of IUnit2. Within 15µs Unit2 Basic Version Only [TSS] Version Switching Freq. Unit2 Power Losses Unit2 Power Losses (PCB and Capacitor) Filterresistors at Output Unit2 Auxiliary Voltage Auxiliary Power Demand EMC Test I=IUnit2, fsw=fsw2 Applicable for Sinewavefilters (damping) only in Produkt ID 24255 and 24256 B6I+B6I690-1100-300G.doc % 320 % fsw2 Ploss2 Ploss_aux 3544 RFilter PRFilter 22 100 Vaux Vaux=24 Vav, to feed Paux with B6U According EN61800-3 at named interfaces 150 Power VBurst Control VBurst Aux VSurge (24V) 2 of 10 2250 400 18 24 80 2 1 1 Hz W W Ohm Watt 30 Vav W kV kV 2004-10-28 ModSTACK Datasheet: B6I+B6I 690/1100-300G M, S Preliminary Data Insulation Test Voltage According EN50178 Visol 1,8 kVRMS CDC Type LTD LTD LTD 12,53 Elcap 17 - mF Year Year Year 292 µH f=50Hz, t=1min Important Component Data DC Link Capacitor DC Link Capacitor Loadcycle: Wind Capacitor Design Lifetime Loadcycle: Solar (eupec approximation) Loadcycle: Industrial Requirements to the Powersource Assumed Inductance Of Feeding Powersource (Necessary inductance not included, feeded by B6U) LFeed Fan Data (assumed when excluded) Fan Type Fan Voltage Fan Frequency Fan Current Fan Air Pressure Assumed Assumed VFan fFan IFan ∆pAirFan QK10A-2DM.68.FK 400 50 1,42 170 VRMS Hz ARMS Pa Controller Interface Data Driver Paralleling Interface Optical Interface Digital Input Level Digital Output Level Analog Current Outputs Unit1 Analog Current Outputs Unit2 Analog DC Link Voltage Output Master Basic Version Master [TSS] Version Slave See Datasheets Master Slave See Datasheet Master Slave See Datasheet Resistor to Gnd (1,8k) High = on min 15mA Open collector Low = ok max 15mA Load max 1mA at IUnit1 Load max 1mA at IUnit2 Basic Version [TSS] Version Load max 1 mA At VDCmax B6I+B6I690-1100-300G.doc PCB TR100 TR101 TR100 PCB SAD101 - PCB OEA101 - Vin 0 15 V Vout 0 15 V VDCout 3 of 10 2,27 V 4 V 2 9 V V 2004-10-28 ModSTACK Datasheet: B6I+B6I 690/1100-300G M, S Analog Temperature Out Optical Input Level Optical Output Level Load max 1mA At ϑj=125°C Preliminary Data 9 Vϑout optionally optionally V 12 µW µW 60 Requirements to the Controller EMC Protection According EN61800-3 at auxiliary power and controlinterface 1 EMC Environment Drive Pulse Time Blockout Time Overvoltage Shut Down Reaction Time Overcurrent Shut Down Reaction Time ton_min tpause After overvoltage message by ModSTACK Interface After overcurrent message by ModSTACK Interface kV Shieldconcept with TE (True Earth) separated from PE, HF conform installation 10 10 50 µs µs µs 10 µs Mechanical Data Airvelocity Airflow heatsink Air Pressure Drop heatsink Watervelocity Waterflow heatsink Water Pressure Drop heatsink Dimensions Mass Storage Temperature Range Operating Temperature range (PCB and Capacitor) Cooling Air Inlet Temperature (Heatsink) Cooling Airvelocity (PCB and Capacitor) Air Pressure Humidity ϑAir=20°C Pair=1013 hPa vAir dV/dtAir ∆pAir Dry- and dustfree, measured outside of heatsink. According DIN 41882 According Coolingwater Specification from eupec vWater dV/dt 596 101 Pa ϑstor -40 +65 mm kg °C ϑop -25 (0) +55 °C ϑair_inlet -25 +40 °C Heatsink temperature > -25°C B6I+B6I690-1100-300G.doc m/s m³/h - 1090 Minimal 0 °C for optional optical interface m/s m³/h Pa 170 Water ∆pWater Width x Depth x Hight Approximation Standard atmosphere No Condensation 6 1600 345 -40 vAir_PCB 2 pAir Rel. F 900 0 4 of 10 m/s 1100 95 hPa % 2004-10-28 ModSTACK Datasheet: B6I+B6I 690/1100-300G M, S Installation Height Vibration Preliminary Data 0 EN60068-2-6, Fc 10..59Hz 0,075mm Permanence Vibration EN60068-2-6, Fc 10-150Hz, 20 Cycles EN60068-2-27, Ea Shock Halfsine 11ms, 3 pulses Protection Degree Pollution Degree Overvoltage Category B6I+B6I690-1100-300G.doc 1000 10 m m/s² 20 m/s² 100 m/s² IP00 2 III 5 of 10 2004-10-28 ModSTACK Datasheet: B6I+B6I 690/1100-300G M, S Preliminary Data Derating Curves (IGBT Part) Current derating at low rotating field frequency (f0). Maximal 100% current is allowed. cos(phi) = 0.64, (motor) Theta_air = 40°C 120 I/I_nom [%] 100 80 60 40 20 0 -5 0 5 10 15 20 25 30 35 40 45 50 55 40 45 50 55 f0 [Hz] cos(phi) = -0.64, (generator) Theta_air = 40°C 120 I/I_nom [%] 100 80 60 40 20 0 -5 0 5 10 15 20 25 30 35 f0 [Hz] B6I+B6I690-1100-300G.doc 6 of 10 2004-10-28 ModSTACK Datasheet: B6I+B6I 690/1100-300G M, S Preliminary Data Current derating at different switching frequencies. See datatable for nominal switching frequency. In this drawing 2500Hz ist assumed. Maximal 100% current is allowed. IGBT, cos(phi) = 0.64 Theta_air = 40°C 180 160 FF 400 R12 KL4C 140 FF 800 R17 KF6CB2 I/I_nom [%] 120 FF 1200 R17 KE3 100 80 60 40 20 0 0 1000 2000 3000 4000 5000 6000 7000 fsw [Hz] Diode, cos(phi) = 0.64 Theta_air = 40°C 200 180 FF 400 R12 KL4C 160 FF 800 R17 KF6CB2 I/I_nom [%] 140 FF 1200 R17 KE3 120 100 80 60 40 20 0 0 1000 2000 3000 4000 5000 6000 7000 fsw [Hz] B6I+B6I690-1100-300G.doc 7 of 10 2004-10-28 ModSTACK Datasheet: B6I+B6I 690/1100-300G M, S Preliminary Data IGBT, cos(phi) = - 0.64 Theta_air = 40°C 180 160 FF 400 R12 KL4C 140 FF 800 R17 KF6CB2 I/I_nom [%] 120 FF 1200 R17 KE3 100 80 60 40 20 0 0 1000 2000 3000 4000 5000 6000 7000 fsw [Hz] Diode, cos(phi) = -0.64 Theta_air = 40°C 180 160 FF 400 R12 KL4C 140 FF 800 R17 KF6CB2 I/I_nom [%] 120 FF 1200 R17 KE3 100 80 60 40 20 0 0 1000 2000 3000 4000 5000 6000 7000 fsw [Hz] B6I+B6I690-1100-300G.doc 8 of 10 2004-10-28 ModSTACK Datasheet: B6I+B6I 690/1100-300G M, S Preliminary Data Miscellaneous This technical information specifies semiconductor stacks but promises no characteristics. It is valid in combination with the belonging technical notes. This document may be changed without prior notice. Warning! Prior to installation and commissioning all safety notices and warnings and all warning signs attached to the equipment have to be carefully read. Make sure that all warning signs remain in a legible condition and missing or damaged signs are replaced. The safety instructions have to be strictly adhered to. The manual contains detailed information on all technical topics with regard to the eupec ModSTACK. For further details regarding publications of the eupec ModSTACK and information on other publications in the area of ModSTACKs please contact your nearest eupec branch or visit our website: http://www.eupec.com. eupec GmbH 2004. All rights reserved Prepared by Approved by J.Schiele B6I+B6I690-1100-300G.doc 2003-04-01 2003-04-01 9 of 10 Date of publication Revision 0.2-04-10-28 2004-10-28 ModSTACK B6I+B6I 690/1100-300G M, S, Drawing, Preliminary Data B6I+B6I690-1100-300G.doc 10 of 10 2004-10-28