MCC MMXZ5221B THRU MMXZ5259B omponents 21201 Itasca Street Chatsworth !"# $ % !"# Features 200 mW l Planar Die construction l 200mW Power Dissipation l Zener Voltages from 2.4V - 39V l Ideally Suited for Automated Assembly Processes Zener Diodes 2.4 to 39 Volts Mechanical Data SOD323 l Case: l Terminals: Solderable per MIL-STD-202, Method 208 A l Approx. Weight: 0.008 gram B l Mounting Position: Any l SOD-323 Molded Plastic C o E o Storage & Operating Junction Temperature: -55 C to +150 C Maximum Ratings @ 25oC Unless Otherwise Specified Zener Current IF 100 mA Maximum Forward VF 1.2 V Voltage Power Dissipation P(AV) 200 mWatt (No te s A) Peak Forward S urge IFSM 2.0 Amps Current (Not e s B) F D G NOTES: A. Mounted on 5.0mm2(.013mm thick) land areas. B. Measured on 8.3ms, single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum. DIM A B C D E F G DIMENSIONS INCHES MM MIN MAX MIN MAX .090 .107 2.30 2.70 .068 .078 1.75 1.95 .045 .054 1.15 1.35 .027 .038 0.70 0.95 .009 .014 0.25 0.35 .002 .006 0.05 0.15 .012 --0.30 --- SUGGESTED SOLDER PAD LAYOUT 0.059" 0.039” 0.031” www.mccsemi.com NOTE MCC MMXZ5221B thru MMXZ5259B Electrical Characteristics @ 25oC Unless Otherwise Specified MCC PART NUMBER MMXZ5221B MMXZ5222B MMXZ5223B MMXZ5225B MMXZ5226B MMXZ5227B MMXZ5228B MMXZ5229B MMXZ5230B MMXZ5231B MMXZ5232B MMXZ5234B MMXZ5235B MMXZ5236B MMXZ5237B MMXZ5239B MMXZ5240B MMXZ5241B MMXZ5242B MMXZ5243B MMXZ5245B MMXZ5246B MMXZ5248B MMXZ5250B MMXZ5251B MMXZ5252B MMXZ5254B MMXZ5255B MMXZ5256B MMXZ5257B MMXZ5258B MMXZ5259B Marking C1 C2 C3 C5 D1 D2 D3 D4 D5 E1 E2 E4 E5 F1 F2 F4 F5 H1 H2 H3 H5 J1 J3 J5 K1 K2 K4 K5 M1 M2 M3 M4 NORMAL ZENER VOLTAGE Vz@ Izt TEST CURRENT Izt VOLTS mA 2.4 2.5 2.7 3.0 3.3 3.6 3.9 4.3 4.7 5.1 5.6 6.2 6.8 7.5 8.2 9.1 10 11 12 13 15 16 18 20 22 24 27 28 30 33 36 39 MAXIMUM ZENER IMPEDANCE ‘B’ SUFFIX ONLY Zzt @ Izt Zzk @ Izk=0.25mA OHMS 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 9.5 8.5 7.8 7.0 6.2 5.6 5.2 4.6 4.5 4.2 3.8 3.4 3.2 30 30 30 29 28 24 23 22 19 17 11 7.0 5.0 6.0 8.0 10 17 22 30 13 16 17 21 25 29 33 41 44 49 58 70 80 MAXIMUM REVERSE LEAKAGE CURRENT Ir @ Vr OHMS 1200 1250 1300 1600 1600 1700 1900 2000 1900 1600 1600 1000 750 500 500 600 600 600 600 600 600 600 600 600 600 600 600 600 600 700 700 800 uA 100 100 75 50 25 15 10 5.0 5.0 5.0 5.0 5.0 3.0 3.0 3.0 3.0 3.0 2.0 1.0 0.5 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 MAXIMUM ZENER VOLTAGE TEMP COEFFICIENT ‘B’ SUFFIX ONLY VOLTS 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 2.0 2.0 3.0 4.0 5.0 6.0 6.5 7.0 8.0 8.4 9.1 9.9 11 12 14 15 17 18 21 21 23 25 27 30 %/oC -0.085 -0.085 -0.080 -0.075 -0.070 -0.065 -0.060 ±0.055 ±0.030 ±0.030 +0.038 +0.045 +0.050 +0.058 +0.062 +0.068 +0.075 +0.076 +0.077 +0.079 +0.082 +0.083 +0.085 +0.086 +0.087 +0.088 +0.090 +0.091 +0.091 +0.092 +0.093 +0.094 NOTE: 1. Tolerance and Type Number Designation. The type numbers listed have a standard tolerance on the nominal zener voltage of ±5%. 2. Specials Available Include: A. Nominal zener voltages between the voltages shown and tighter voltage tolerances. B. Matched sets. 3. Zener Voltage (VZ) Measurement. Guarantees the zener voltage when measured at 90 seconds while maintaining the lead temperature (TL) at 30OC, from the diode body. 4. Zener Impedance (ZZ) Derivation. The zener impedance is derived from the 60 cycle ac voltage, which results when an AC current having an rms value equal to 10% of the dc zener current (IZT or IZK) is superimposed on IZT or IZK. 5. Surge Current (IR) Non-Repetitive. The rating listed in the electrical characteristics table is maximum peak, non-repetitive, reverse surge current of 1/2 square wave or equivalent sine wave pulse of 1/120 second duration superimposed on the test current, IZT, per JEDEC registration; however, actual device capability is as described in Figure 5. www.mccsemi.com MCC MMXZ5221B thru MMXZ5259B 8 100 TEMPERATURE COEFFICIENT,mV / oC) TEMPERATURE COEFFICIENT,mV / oC) 7 6 5 4 3 10 2 1 0 -1 -2 -3 2 3 4 5 6 7 8 9 10 11 1 10 12 100 NOMINAL ZENER VOLTAGE, Volts NOMINAL ZENER VOLTAGE, Volts TYPICAL REVERSE CURRENT 1000 TJ=25 C IZ(AC)=0.1IZ(DC) F=1 kHZ O IZ = 1 mA FORWARD CURRENT, mA DYNAMIC IMPEDANCE, W 1000 STEADY STATE POWER DERATING 100 5 mA 20 mA 10 100 10 O 150 C 75OC 5OC 25OC 1 1 10 1 0.4 100 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 FORWARD VOLTAGE, Volts NORMAL ZENER VOLTAGE, Volts TYPICAL FORWARD VOLTAGE EFFECT OF ZENER VOLTAGE ON ZENER IMPEDANCE 1000 CAPACITANCE, pF POWER DISSIPATION, Watts 1.0 0.8 0.6 0.4 100 BIAS AT 50% OF VZ NOM 10 PD V.S. TA 0.2 0 TA=25oC 0 V BIAS 1 V BIAS 1.2 1 25 50 75 100 125 150 o TEMPERATURE ( C) STEADY STATE POWER DERATING 1 10 155 NOMINAL ZENER VOLTAGE, Volts TYPICAL CAPACITANCE www.mccsemi.com 100 MCC MMXZ5221B thru MMXZ5259B 100 100 o o TA=25 C 10 ZENER CURRENT, mA ZENER CURRENT, mA TA=25 C 1 0.1 0.01 0 2 4 6 8 10 12 ZENER VOLTAGE, Volts 10 1 0.1 0.01 10 30 50 ZENER VOLTAGE V.S. ZENER CURRENT LEAKAGE CURRENT (mA) 1000 100 10 1 +150OC 0.1 0.01 0.001 +25OC 0.0001 -55OC 0 10 20 30 40 50 60 90 ZENER VOLTAGE, Volts ZENER VOLTAGE V.S. ZENER CURRENT 0.00001 70 70 80 90 NOMINAL ZENER VOLTAGE, Vlots TYPICAL LEAKGE CURRENT www.mccsemi.com