Vishay MCN1002X101KTB Capacitor networks, molded sip Datasheet

MCN
Vishay Techno
Capacitor Networks, Molded SIP
FEATURES
•
•
•
•
•
•
•
Custom schematics available
NP0 or X7R capacitors for line terminator
Wide operating temperature range (- 55 °C to 125 °C)
Molded epoxy case
Solder coated copper terminals
Solderability per MIL-STD-202 method 208E
Marking resistance to solvents per MIL-STD-202 method 215
STANDARD ELECTRICAL SPECIFICATIONS
MODEL
CAPACITANCE RANGE
X7R
NP0 (1)
33 pF - 3900 pF
470 pF - 0.1 µF
33 pF - 3900 pF
470 pF - 0.1 µF
33 pF - 3900 pF
470 pF - 0.1 µF
SCHEMATIC
01
02
09
MCN
CAPACITANCE TOLERANCE (2)
±%
± 10 %, ± 20 %
± 10 %, ± 20 %
± 10 %, ± 20 %
CAPACITANCE VOLTAGE
VDC
50
50
50
Notes
(1) NP0 capacitors may be substituted for X7R capacitors
(2) Tighter tolerances available on request
SCHEMATICS
DIMENSIONS in inches [millimeters]
0.150 ± 0.010
[3.81 ± 0.254]
SCHEMATIC 01
A
C
C
C
C
C
B
1
2
3
4
n-1
C
(Seating
Plane)
0.020 ± 0.002
[0.508 ± 0.051]
SCHEMATIC 02
C
Pin #1 Identifier
n
C
0.020 ± 0.002
[0.508 ± 0.051]
0.125 ± 0.015
[3.18 ± 0.381]
1
2
3
4
9
C
10
SCHEMATIC 09
C
1
C
2
C
3
C
4
n-1
n
0.100 ± 0.005 [2.54 ± 0.127]
Non-Cumulative
0.010 ± 0.002
[0.254 ± 0.051]
NUMBER
OF PINS
A
± 0.010 [0.254]
B
± 0.010 [0.254]
C
± 0.010 [0.254]
5
0.620 [15.75]
0.305 [7.75]
0.110 [2.79]
8
0.780 [19.81]
0.325 [8.26]
0.040 [1.02]
9
0.940 [23.88]
0.246 [6.25]
0.075 [1.91]
10
1.040 [26.42]
0.346 [8.79]
0.075 [1.91]
Note
• Custom schematics available
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: MCN0801N101KTB (preferred part number format)
M
GLOBAL
MODEL
C
N
0
PIN COUNT SCHEMATIC
MCN
05 = 5 pin
08 = 8 pin
09 = 9 pin
10 = 10 pin
01
02
09
8
0
1
N
1
CHARACTERISTICS CAPACITANCE
VALUE
N = NP0
X = X7R
(in picofarads)
2 digit significant
figure, followed
by a multiplier
101 = 100 pF
392 = 3000 pF
104 = 0.1 µF
0
1
K
T
B
TOLERANCE
TERMINAL
FINISH
PACKAGING
K = 10 %
M = 20 %
T = Sn90/Pb10
B = Bulk
Historical Part Numbering: MCN0801101KS10 (will continue to be accepted)
MCN
HISTORICAL
MODEL
Document Number: 68004
Revision: 17-Mar-08
08
PIN COUNT
01
101
SCHEMATIC
CAPACITANCE
VALUE
K
S10
TOLERANCE
TERMINAL
FINISH
For technical questions, contact: [email protected]
www.vishay.com
15
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
Similar pages