TECHNICAL DATA SHEET 15 LH1-021-XXX MEASUREMENT CABLE All dimensions are in mm; tolerances according to ISO 2768 m-H Interface According to 15K101-40M IEC 60169-15 Suitable cables RTK 013, cable group H1 Micro coax cable d=1.37mm, center conductor AWG30 Connector are only sold with cable Minimum bending radius single 4x ø Minimum bending radius repeated 8x ø Documents Technical data sheet Technical data sheet Technical data sheet Micro RF plug 15S209-3H1E4 SMA plug 32S101-3H1L5 cable RTK 013 Available Variants Type LH1-021-100 LH1-021-300 LH1-021-600 Length a [mm] 100 300 600 Weight [g] 4.5 8.2 9.6 Standard length available and customized length on request Electrical data RF_35/08.06/4.0 Impedance Frequency Return loss (Simulated) Insulation resistance Center contact resistance Outer contact resistance Working voltage ≤ ≤ ≤ ≥ ≤ ≤ Rosenberger Hochfrequenztechnik GmbH & Co. KG P.O.Box 1260 D-84526 Tittmoning Germany www.rosenberger.de 50 Ω DC to 6 GHz -25 dB at 2 GHz -22 dB at 3 GHz -16 dB at 6 GHz 0.5 x103 MΩ 50 mΩ 50 mΩ 4V Tel.: +49 8684 18-0 Fax: +49 8684 18-499 email: [email protected] Page 1/2 TECHNICAL DATA SHEET Micro RF LH1-021-XXX CABLE CONNECTOR Mechanical data Mating form Mating cycles Mating force Unmating force Snap-on > 10,000 < 6N > 7N Environmental data Temperature range 2002/95/EC (RoHS) -40°C to +90°C compliant Cables Cable group H1 Micro coax cable H1 (RTK 013) Center conductor AWG 30 Mating and un-mating For the reliable mating and un-mating follow the precautions : 1. The vertical mating axis of the PCB receptacle and the adapter has to be aligned during the connecting and a hearable click will confirm that the connectors are mated correctly. 2. The disconnection of the 2 connectors is carried out by vertical pulling of the adapter. 3. The connectors should not be mated under an extreme angle. 4. The mating force should be in the limits 5 N ≤ F ≤ 10 N x. 5° t ma n e lignm misa Packing Standard 1 pcs in plastic bag RF_35/08.06/4.0 While the information has been carefully compiled to the best of our knowledge, nothing is intended as representation or warranty on our part and no statement herein shall be construed as recommendation to infringe existing patents. In the effort to improve our products, we reserve the right to make changes judged to be necessary. Draft Date Approved Date Rev. Engineering change number Name Date F. Michelmann 09.05.07 F.Michelmann 03.12.15 c00 15-1707 S.Hofmeister 03.12.15 Rosenberger Hochfrequenztechnik GmbH & Co. KG P.O.Box 1260 D-84526 Tittmoning Germany www.rosenberger.de Tel.: +49 8684 18-0 Fax: +49 8684 18-499 email: [email protected] Page 2/2