IAC5, IDC5, OAC5, ODC5 5 VDC SOLID-STATE OPTO-ISOLATED I/O MODULES • Available in Standard or Mini-Pack Solid state I/O switching modules deliver an electrically clean, photo-isolated, noise-free "output" interface from logic level control systems to external loads such as motors, valves, solenoids, etc. -- or an "input" interface from the load or sensors to microprocessor or computer-based logic level systems. Designed for long, reliable service in demanding industrial environments. Manufactured in Crydom’s ISO 9002 Certified facility for optimum product performance and reliability. SYSTEM VOLTAGE 5 Vdc Model Number MINI-PACK Voltage Type IAC5 MIAC5 IAC5A MIAC5A AC or DC Input AC or DC Input Yellow Color Code Yellow IDC5 MIDC5 IDC5B MIDC5B OAC5 MOAC5 OAC5A MOAC5A ODC5 MODC5 ODC5A MODC5A DC Input DC Input AC Output AC Output DC Output DC Output White White Black Black Red Red 3-32 Vdc 3-6 Vdc 3-6 Vdc 3-6 Vdc 3-6 Vdc INPUT SPECIFICATIONS Voltage Range 90-140 Vac 180-280 Vac 10-36 Vdc Typical Current @ Rated Voltage 7 mA 5 mA 8 mA 13 mA 19 mA 19 mA 14 mA 14 mA Typical Current @ Maximum Voltage 8 mA 5.5 mA 10 mA 15 mA 22 mA 22 mA 18 mA 18 mA .02-3A @ 5-60 Vdc .02-1A @ 10-200 Vdc Cycle 0.3 ms 0.5 ms Cycle 0.3 ms 0.5 ms ----- ----- OUTPUT SPECIFICATIONS Load Current Over Load Voltage Range .1-100 mA @ .1-100 mA @ .1-100 mA @ .1-100 mA @ .02-3A @ .02-3A @ .4-30 Vdc .4-30 Vdc .4-30 Vdc .4-30 Vdc 12-140 Vac 24-280 Vac Maximum Turn-on Time 20 ms 20 ms 5 ms 1 ms Maximum Turn-off Time 20 ms 20 ms 5 ms 1 ms Frequency Range 47-63Hz 47-63Hz ----- ----- Switching Type Random Random Random Random Max. Surge (non-repetitive) 100mA 100mA 30Vdc 30Vdc Max. Off-State Voltage 30Vdc 30Vdc 30Vdc 30Vdc Notes 1,2,4,6 1,2,4,6 1,2,4 1,2,4 1/ 2 1/ 2 Cycle Cycle 1/ 2 1/ 2 47-63Hz 47-63Hz Zero Zero 80Apk (1cycle) 80Apk (1cycle) Random Random 5A (1 sec) 5A (1 sec) 400Vpk 600Vpk 60Vdc 200Vdc 1,2,3 1,2,3 1,2,3 1,2,3 ©1998 CRYDOM CORP Specifications subject to change without notice. NOTES 1. UL recognized. 2. CSA certified. 3. The output of the AC output module is compatible with the input of the AC input module and the output of the DC output module is compatible with the input of the DC input module. 4. Input modules provide an output that is active low. 5. Output modules can be controlled from active or active high logic. 6. Input will operate on AC or DC voltage. 7. Inductive loads should be diode suppressed for all DC output devices. FastFax Document No. 301 I/OMOD5V.040898, PAGE 1 OF 2 For recommended applications and more information contact: USA: (800) 8 CRYDOM • (800) 827-9366 • (619) 715-7200 • fax (619) 715-7280 9525 Chesapeake Drive, San Diego, CA 92123 • e-mail: [email protected] WEB SITE: http://www.crydom.com FASTFAX Product Information: (888) 267-9191 UK: (44)1202 812300 • fax (44)1202 812340 85, Condor Close, Woolsbridge Industrial Estate, Three-Legged Cross. Wimborne, Dorset, England BH21 6SU GERMANY: (49)871 935405 • fax (49)871 935407, Aussere Parkstr.5, D-84032 Altdorf, Germany 9002 IAC5, IDC5, OAC5, ODC5 5 VDC SOLID-STATE OPTO-ISOLATED I/O MODULES GENERAL SPECIFICATIONS Input/Output Isolation Voltage 4000 Vrms 109 Ohm Insulation Resistance (Min.) @ 500 Vdc Max. Capacitance Input/Output Ambient Operating Temperature Range -40 to 80ºC Ambient Storage Temperature Range -40 to 125ºC MECHANICAL SPECIFICATIONS Weight: (typical) 0.6 oz. (17g) Encapsulation: Thermally Conductive Epoxy OAC/ODC MINI-PACK MIAC, MIDC (5 pin models) MOAC, MODC (4 pin models) IAC/IDC BOTTOM VIEW BOTTOM VIEW .30 (7.6) CAPTIVE #4-40. PHILLIPS HEAD HOLD DOWN SCREW 1.70 (43.1) 16 pF .100 (2.5) 1.00 (25.4) 1.25 (31.7) .30 (7.6) .60 (15.2) CAPTIVE #4-40. PHILLIPS HEAD HOLD DOWN SCREW 1.70 (43.1) .60 (15.2 BOTTOM VIEW .40 (10.2) .100 (2.5) 1.00 (25.4) .100 (2.5) 1.00 (25.4) 1.25 (31.7) .25 (6.35) .25 (6.3) 5 4 3 2 1 .030 (0.8) .25 (6.3) 4 3 2 1 .30 (7.6) .040 (1.0) DIA. (4 PLACES) .70 (17.8) 1.20 (30.5) 1.40 (35.5) 1.60 (40.6) .030 (0.8) .30 (7.6) .040 (1.0) DIA. (4 PLACES) .70 (17.8) 5 4 3+ 2 1 .30 (7.6) .200 (5.1) .700 (17.8) 1.100 (27.9) 1.20 (30.5) 1.40 (35.5) .040 (1.0) DIA. (4 PLACES) 1.30 (43.1) 1.70 (43.1) All dimensions are in inches (millimeters) ©1998 CRYDOM CORP Specifications subject to change without notice. FastFax Document No. 301 I/OMOD5V.040898, PAGE 2 OF 2 For recommended applications and more information contact: USA: (800) 8 CRYDOM • (800) 827-9366 • (619) 715-7200 • fax (619) 715-7280 9525 Chesapeake Drive, San Diego, CA 92123 • e-mail: [email protected] WEB SITE: http://www.crydom.com FASTFAX Product Information: (888) 267-9191 UK: (44)1202 812300 • fax (44)1202 812340 85, Condor Close, Woolsbridge Industrial Estate, Three-Legged Cross. Wimborne, Dorset, England BH21 6SU GERMANY: (49)871 935405 • fax (49)871 935407, Aussere Parkstr.5, D-84032 Altdorf, Germany 9002