60 W XENON FLASH LAMP SERIES BUILT-IN REFLECTIVE MIRROR L7684, L7685/L6604, L6605 PATENT PENDING FEATURES High Stability: Fluctuation (p-p) 3 % Max. High Input Energy: 1 J (per one flash) Long Life: 8 × 107 flashes Min. Short Arc: 3 mm Spectral Distribution: 190 nm to 2000 nm (Sapphire glass window type) High Repetition Rate Meeting TV rate: 60 Hz Short flash pulse-width (FWHM): 2.90 µs (at 2 µF, 1000 V) TLSXF0105 Built-in Reflective Mirror/1.5 Times Brighter (L7684, L7685) APPLICATIONS Stroboscope for FA High Speed Image Processing Industrial Stroboscope Pollution Analysis etc. TLSXF0103 CHARACTERISTICS Parameter L7684 L6604 L7685 Borosilicate Glass Window Material Spectral Distribution Reflective Mirror 190 to 2000 240 to 2000 Built-in L6605 Unit Single Crystal Sapphire Glass — Built-in nm — Operating Voltage 300 to 1000 V Recommended Operating Voltage 700 to 1000 V 5 to 10 kV 0.22 µF 1 J 60 3 W mm 60 Hz 3 % Max. Trigger Voltage Trigger Capacitor Value Maximum Average Input Energy (single) Maximum Average Input (continuous) Arc Length Maximum Repetition Rate b c Output Fluctuation (p-p) Guaranteed Life (number of flashes) Applicable Trigger Socket Applicable Power Supply Applicable Cooling Jacket NOTE: d a 8× 107 flashes Min. E6647 C6096 e E6611 f a Average input energy (E) is calculated by the below formula. E: Average input energy (J) C: Main discharge capacitor value (F) E = 1/2 CV2 V: Main discharge voltage (V dc) b Average Input(W) is calculated by the below formula. W=E×f f: Repetition frequency (repetition rate) c At 1 J/flash (60 W) input. Maximum 100 Hz operation is possible with keeping average input 60 W or lower. d At 1 J/flash input energy (60 W) with using the cooling jacket of E6611. e It is necessary to have an additional external capacitor E7289-01 for 60 W input, when 1 J/flash input energy is needed. f It has to be used for the operation more than 15 W input. Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult with our sales office. Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2001 Hamamatsu Photonics K.K 60 W XENON FLASH LAMP SERIES Figure 1: Spectral Distribution 2 TLSXB0104EA TLSXB0084EA 100 60 W Xenon Flash Lamp Buit-in Reflective Mirror L7685 (1 J: 2 µF/1 kV) 60 W Xenon Flash Lamp L6605 (1 J: 2 µF/1 kV) 1.8 1.4 1.2 1 0.8 0.6 0.4 0.2 1 J/flash 80 RELATIVE INTENSITY (%) 1.6 RELATIVE INTENSITY Figure 2: Flash Pulse Waveforms (L6604, L6605) 60 FWHM 2.90 µs 0.15 J/flash 40 FWHM 1.75 µs 20 0 0 200 300 400 500 600 700 800 TIME (2 µs/div.) WAVELENGTH (nm) Figure 4: Dimensional Outline (Unit: mm) Figure 3: Life Characteristics 100 L7684, L7685 (Built-in Reflective Mirror) TLSXB0083EC 34.8 ± 0.5 OUTPUT WINDOW 80 60 REFLECTIVE MIRROR PIN CONNECTION (BOTTOM VIEW) 28.9 ± 0.3 3 40 ANODE 25.8 ± 0.5 34.5 ± 0.5 1 20 6 × 107 (300) 8 × 107 (400) 1 × 108 (500) 5 SPARKER 3 TRIGGER PROBE 4 TLSXA0082EA NUMBER OF FLASHES *( ) OPERATING TIME [h] TRIGGER PROBE 15 MAX. 4 × 107 (200) 1.3 2 × 107 (100) L6604, L6605 34.8±0.5 MAIN DISCHARGE VOLTAGE: 1 kV MAIN DISCHARGE CAPACITOR: 2 µF REPETITION RATE: 60 Hz INPUT ENERGY: 1 J / FLASH OUTPUT WINDOW 14.3±0.15 The life end is defined as the time when the radiant intensity falls to 50 % of its initial value or when the output flutuation exceeds ±3 %. PIN CONNECTION (BOTTOM VIEW) 28.9±0.3 3 ANODE 1 34.5±0.5 2 25.8±0.5 3 5 SPARKER TRIGGER PROBE 4 TRIGGER PROBE CATHODE 15 MAX. 0 2 CATHODE GUARANTEED LIFE 0 1.3 RELATIVE INTENSITY (%) 14.3 ± 0.15 TLSXA0049EC RELATED PRODUCTS Trigger Socket E6647 In order to operate a Xenon flash lamp, it is necessary to supply the prescribed high voltage between anode and cathode, and to trigger probes. To facilitate the above operation, the trigger socket consists of high voltage transformer and voltage divider resistors and capacitors chain to supply the appropriate pulse voltage to each electrode. As E6647 radiates heat from its metal parts during the operation due to the input energy, it is recommended to use a cooling fan to keep the surface temperature of the metal parts at less than 50 °C. Dimensional Outline (Unit: mm) 14.8±0.1 METAL RED : MAIN DISCHAGE VOLTAGE WHITE : TRIGGER VOLTAGE BLACK : GND (MAIN) BROWN : GND (TRIGGER) 5.5 73.5±2.0 500±20 28.5±1.0 TLSXA0050EB Power Supply C6096 C6096 has large capability to operate the lamp stable in spite of its compact dimensions. At 1 J/flash input energy becomes over 0.05 J, it is necessary to have an additional external capacitor E7289-01 (option). Dimensional Outline (Unit: mm) 300 V to 1000 V 60 W Max. ±1 % Max. 0.1 µF 180 V Typ. 0.22 µF Internal / External 10 Hz to 100 Hz 1 kΩ Rectangular Waveform 5V 24 V ± 1.2 V 90 W Not Required Approx. 550 g 108±2 174±3 24.0±0.5 Description/Value 49±2 Parameter Output Voltage g h (dc) Main Output Capacity Power Supply Stability Main Supply Capacitor i Trigger Trigger Output Voltage Section Trigger Capacitor Trigger Type j Trigger Repetition Rate Input Trigger Input Impedance Section Input Waveform k Input Voltage Input Voltage (dc) Power Consumption Cooling Weight 2-M3 100.0±0.5 2-M3 140.0±0.5 Specifications NOTE: g The range of 700 V to 1000 V is used for the operation of 60 W Xenon flash lamp series. In the case of connects temperature sensor lead lines from the cooling jacket, the output voltage becomes 0 V when the temperature sensor turns on. i At 1 J/flash input energy becomes over 0.05 J, it is necessary to have an additional external capacitor E7289-01 (option). j Don’t use beyond 60 Hz at the operation of 60 W input. k A trigger pulse voltage is supplied to each electrode at the same time as an input trigger signal rise. h 80.0±0.5 14 TLSXA0051EA 60 W XENON FLASH LAMP SERIES Cooling Jacket E6611 This cooling jacket is exclusively designed for 60 W Xenon flash lamps will keep the temperature of the lamp and electric parts such as the trigger socket at less than maximum ratings and maintain at even temperature by a built-in cooling fan, and offers the stable operation of the lamp. It has to be used for the operation of more than 15 W input. Dimensional Outline (Unit:mm) SETTING HOLES 2-M4 × P1 35 TRIGGER SOCKET SHIELD CABLE TRIGGER SOCKET LAMP * The temperature sensor is for the protection of a lamp, a trigger socket and a power supply, when it detects an abnornal high temperature due to out of work with the cooling fan. When lead lines of temperature sensor are connected to the protection circuit terminal of C6096 exclusive power supply, the power supply will stop its operation. TEMPERATURE SENSOR* 65 62.0±0.5 M23 × P1 COOLING FAN (RATING : 24 V, 0.1 A dc) RED: Cooling fan input voltage (+24 V) BLACK: Cooling fan GND YELLOW: Temperature sensor BLUE: Temperature sensor 21.0±1.5 175±3 TLSXA0052EB Light-Guides Dimensional Outline (Unit: mm) Quartz glass fiber 220 nm to 1300nm 5 mm 1m Compound glass fiber 380 nm to 1300nm 5 mm 1m A2873 A7432 25 6.5 SUS FLEXIBLE TUBE 10 Output diameter Length External Main Discharge Capacitor E7289-01 The exclusive main discharge capacitor (2 µF) for 60 W (1 J/Flash, 60 Hz) inputs the operation of 60 W Xenon flash lamp series. It allows to operate safely by easy connection with a power supply. 10 33 7 11 15 60 TLSXA0062EA Dimensional Outline (Unit: mm) 160 ± 3 100 ± 3 320 55±2 Transmittance wavelength 30 100 ± 1 Material Type No. 1000 13 Light-guides are effective to guide the output light into a place where does not allow to direct irradiation due to its construction or to plural places simultaneously. A short arc of 60 W Xenon flash lamps allows the light into the light-guides effectively. As the standard option, two types of light guide are available from us upon your application. Please refer to below table.The light-guides holder for the cooling jacket is also available from Hamamatsu. (The light-guides holder will be included for the combination order of the cooling jacket and the standard light-guides.) 2-M3 78 ± 1 Warranty TLSXA0053ED The warranty period will be one year following the date of shipment or specified life time whichever comes first. The area of warranty is Iimited to replacement of the faulty lamp. Faults resulting from natural disasters and improper usage will also be excluded from warranty. * PATENT PENDING : JAPAN 1 HOMEPAGE URL http://www.hamamatsu.com HAMAMATSU PHOTONICS K.K., Electron Tube Center 314-5, Shimokanzo, Toyooka-village, Iwata-gun, Shizuoka-ken, 438-0193, Japan, Telephone: (81)539/62-5248, Fax: (81)539/62-2205 U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P. O. Box 6910, Bridgewater. N.J. 08807-0910, U.S.A., Telephone: (1)908-231-0960, Fax: (1)908-231-1218 E-mail: [email protected] Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49)8152-375-0, Fax: (49)8152-2658 E-mail: [email protected] France: Hamamatsu Photonics France S.A.R.L.: 8, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: (33)1 69 53 71 00, Fax: (33)1 69 53 71 10 E-mail: [email protected] United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road Welwyn Garden City Hertfordshire AL7 1BW, United Kingdom, Telephone: 44-(0)1707-294888, Fax: 44(0)1707-325777 E-mail: [email protected] North Europe: Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171-41 SOLNA, Sweden, Telephone: (46)8-509-031-00, Fax: (46)8-509-031-01 E-mail: [email protected] TLSX1029E02 Italy: Hamamatsu Photonics Italia: S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39)02-935 81 733, Fax: (39)02-935 81 741 E-mail: [email protected] JUL. 2001 IP Printed in Japan (1000)