BD0926 Dedicated Band 2-Way SMT Power Divider 700~1000MHz Cellular & GSM900 Device Features • • • • • Typical Isolation = 23 dB Typical Insertion Loss = 0.6 dB MSL 3 moisture rating Small Size and Low Profile Lead-free/RoHS-compliant SOT-26 Plastic Package BD09XX(XX=Wafer number) Product Description Typical Performance1 BeRex’s Divider BD0926 is designed for Cellular & GSM band with low Insertion Loss and Isolation. This chip is fully passivated for enhanced performance and reliability and packaged in RoHS-compliant with SOT-26 surface mount package. Parameter Min Frequency Range Insertion Loss 700 Isolation 16.5 Typical 0.6 Max Unit 1000 0.8 MHz dB 23.0 dB IRL(S11) -17.0 -14.5 dB ORL(S22/S33) Amplitude Balance Phase Balance -20.0 0.05 0.4 -15.0 0.2 0.5 dB dB deg *All specifications apply to the following test conditions, 1. Device performance _ measured on BeRex E/B at 25°C, 50ohm system. 2. Insertion Loss: Above 3.0dB. Applications Absolute Maximum Ratings • Base station Infrastructure • Commercial/Industrial/Military wireless system Parameter Input Power Storage Temperature Operating Temperature Rating 1W CW dBm -55 to +155°C -40 to +85°C Operation of this device above any of these parameters may result in permanent damage. Evaluation Board Drawing Function Block Diagram Pins 2,4 and 6 must be DC and RF grounded. BeRex ●website: www.berex.com ●email: [email protected] 1 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2018 BeRex Rev. F BD0926 Dedicated Band 2-Way SMT Power Divider 700~1000MHz Cellular & GSM900 Typical Test Data BeRex Parameters Unit Cellular & GSM900 Frequency Range MHz 700 750 800 850 900 950 1000 Insertion Loss dB 0.54 0.55 0.55 0.57 0.59 0.63 0.70 Isolation dB 17.39 22.03 30.99 31.43 23.06 18.99 16.37 IRL(S11) dB -16.30 -17.18 -17.68 -17.87 -17.30 -16.15 -14.75 ORL(S22,S33) dB -27.8 -25.66 -22.59 -20.03 -18.20 -16.69 -15.50 Phase Diff. deg 0.13 0.22 0.23 0.23 0.24 0.41 0.42 Amplitude Balance dB 0.01 0.01 0.01 0.01 0.02 0.02 0.02 Insertion Loss vs. Frequency Isolation vs. Frequency IRL vs. Frequency ORL vs. Frequency ●website: www.berex.com ●email: [email protected] 2 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2018 BeRex Rev. F BD0926 Dedicated Band 2-Way SMT Power Divider 700~1000MHz Cellular & GSM900 Package Outline Drawing Suggested PCB Land Pattern and PAD Layout PCB Land Pattern PCB Mounting Ø0.8 2.3 0.4 0.9 0.65 2.2 Ø0.8 Note : All dimension _ millimeters PCB lay out _ on BeRex website BeRex ●website: www.berex.com ●email: [email protected] 3 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2018 BeRex Rev. F BD0926 Dedicated Band 2-Way SMT Power Divider 700~1000MHz Cellular & GSM900 Package Marking XX = Wafer No. Tape & Reel SOT-26 Packaging information: Tape Width (mm): 8 Reel Size (inches): 7 Device Cavity Pitch (mm): 4 Devices Per Reel: 3000 Lead plating finish 100% Tin Matte finish (All BeRex products undergoes a 1 hour, 150 degree C, Anneal bake to eliminate thin whisker growth concerns.) BeRex ●website: www.berex.com ●email: [email protected] 4 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2018 BeRex Rev. F BD0926 Dedicated Band 2-Way SMT Power Divider 700~1000MHz Cellular & GSM900 MSL / ESD Rating MSL Rating: Level 3 at +265°C convection reflow Standard: JEDEC Standard J-STD-020 NATO CAGE code: 2 BeRex N 9 6 F ●website: www.berex.com ●email: [email protected] 5 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2018 BeRex Rev. F