Applied Motion Products, Inc. 404 Westridge Dr. Watsonville, CA 95076, USA 1-800-525-1609 Tel (831) 761-6555 Fax (831) 7616544 HH17-101 Product Datasheet www.Applied-Motion.com 1pc. - 50.00 50pc. - 37.50 Hollow Shaft, NEMA 17 High Torque Step Motor Product Features Hollow shaft for mounting custom shafts or lead screws High torque design NEMA 17 frame size 2-phase hybrid step motor 1.8 degree step angle Shipped with detachable lead/connector pigtail Description Product Description: The HH17-101 two-phase stepper motor features a hollow shaft with a 5 mm bore. The hollow shaft allows for the attachment of lead screws and customized shafts without disassembling the motor. This step motor is suitable for a wide range of motion control applications and is recommended for use with our popular ST5 stepper drives . Specifications Part Number: HH17-101 Frame Size: NEMA 17 Motor Type: High torque Motor Length: 1.57 inches Number of Lead Wires: Lead Wire Configuration: Lead Wire/Cable Length: Lead Wire Gauge: Bipolar Holding Torque: Step Angle: 4 flying leads, no connector 11.8 inches 26 AWG 63.7 oz-in 1.8 deg Bipolar Series Current: 2 A/phase Bipolar Series Resistance: 1.04 Ohms/phase Bipolar Series Inductance: 2.73 mH/phase Rotor Inertia: 8.07E-04 oz-in-sec2 Weight: Storage Temperature: Operating Temperature: Insulation Class: End Play: 0.62 lbs -30 to 70 °C -20 to 50 °C B 0.004 inch max w/ 22.5 lb load Downloads Datasheet: http://s3.amazonaws.com/applied-motion-pdf/HH17-101.pdf 2D Drawing: HH17-101_RevA.pdf 3004-320_RevA.pdf 3D Drawing: HH17-101.igs Speed-Torque Curves: HH17-101 Torque Curve.pdf Torque Curves Pricing HH17-101 Part No. w/ Single Shaft 1pc. $50.00 25pc. $43.00 50pc. $37.50 100pc. Request a Quote for 100+ piece pricing.