DOMINANT Semiconductors DomiLED – GaP : DDx-GJS-I1 • Low current surface mount LED. • 120° viewing angle. • Small package outline (LxWxH) of 3.2 x 2.8 x 1.8 mm. • Qualified according to JEDEC moisture sensitivity Level 2. • Compatible to both IR reflow soldering and TTW soldering. 30/04/04 DomiLED Gap DDx-GJS -I1 Catalogue-v3.doc Page 1 of 1 DOMINANT Semiconductors Part Ordering Number Chip Technology / Color DDR-GJS-J2L1-1-I1 GaP / • • • DDR-GJS-J2 DDR-GJS-K1 DDR-GJS-K2 • DDR-GJS-L1 DDO-GJS-H2K1-1-I1 • • • DDO-GJS-H2 DDO-GJS-J1 DDO-GJS-J2 • DDO-GJS-K1 DDY-GJS- H2K1-1-I1 • • • DDY-GJS-H2 DDY-GJS-J1 DDY-GJS-J2 • DDY-GJS-K1 DDG-GJS- KL2-1-I1 • • • DDG-GJS-K1 DDG-GJS-K2 DDG-GJS-L1 • DDG-GJS-L2 DDP-GJS-GH2-1-I1 • • • DDP-GJS-G1 DDP-GJS-G2 DDP-GJS-H1 • DDP-GJS-H2 Luminous Intensity @ If = 10mA Iv ( mcd ) Red, 625 nm GaP / Orange, 605 nm GaP / Yellow, 587 nm GaP / Green, 570 nm GaP / 5.6 … 14.0 5.6 … 7.2 7.2 … 9.0 9.0 … 11.2 11.2 … 14.0 3.55 … 9.0 3.55 4.5 5.6 7.2 … 4.5 … 5.6 … 7.2 … 9.0 3.55 … 9.0 3.55 4.5 5.6 7.2 … 4.5 … 5.6 … 7.2 … 9.0 7.2 … 18.0 7.2 … 9.0 9.0 … 11.2 11.2 … 14.0 14.0 … 18.0 1.80 … 4.50 Green, 560 nm 1.80 … 2.24 2.24 … 2.80 2.80 … 3.55 3.55 … 4.50 NOTE: 1. All part number above comes in a quantity of 2000 units per reel. 2. Luminous intensity is measured with an accuracy of ±11%. 3. Wavelength binning is carried for all units as per the wavelength-binning table. Only one wavelength group is allowed for each reel. 30/04/04 DomiLED Gap DDx-GJS -I1 Catalogue-v3.doc Page 2 of 2 DOMINANT Semiconductors Characteristics. Forward voltage Chip Type @ If=10 mA. Viewing angle Max reverse current, IR at 50% Iv 2.05 V (typ.); 2.45 V (max) GaP @ VR = 5V. 120° 100 μA All forward voltages are measured using a current pulse of 1 ms and has an accuracy of ±0.1 V. Wavelength Grouping. Color Group Wavelength distribution (nm) DDR; Red Full 620 – 635 DDO; Orange Full 600 – 612 W 600 - 603 X 603 - 606 Y 606 - 609 Z 609 - 612 Full 582 – 594 W 582 – 585 X 585 – 588 Y 588 - 591 Z 591 - 594 Full 564.5 – 576.5 W 564.5 – 567.5 X 567.5 – 570.5 Y 570.5 – 573.5 Z 573.5 – 576.5 Full 552.5 – 564.5 W 552.5 – 555.5 X 555.5 – 558.5 Y 558.5 – 561.5 Z 561.5 – 564.5 DDY; Yellow DDG; Green DDP; Pure Green Dominant wavelength is measured with an accuracy of ±1 nm. 30/04/04 DomiLED Gap DDx-GJS -I1 Catalogue-v3.doc Page 3 of 3 DOMINANT Semiconductors Absolute Maximum Ratings. Maximum Value Unit DC forward current. 30 mA Peak pulse current; (tp ≤ 10 μs, Duty cycle = 0.005) 500 mA Reverse voltage. 5 V 100 °C Operating temperature. -40 … +100 °C Storage temperature. -40 … +100 °C LED junction temperature. Power dissipation ( at room temperature ) 75 mW Recommended Solder Pad 30/04/04 DomiLED Gap DDx-GJS -I1 Catalogue-v3.doc Page 4 of 4 DOMINANT Semiconductors Forward current vs. forward voltage. 4.0 35 3.5 30 Forward Current (mA) Relative intensity. Normalized at 10 mA. Relative luminous intensity vs. forward current. 3.0 2.5 2.0 1.5 1.0 25 20 15 10 5 0.5 0 0.0 0 5 10 15 20 25 30 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 35 Forward Voltage (V) Forward Current (mA) Maximum forward current vs. temperature. Radiation pattern. 30° 20° 10° 0° 1.0 40° 0.8 35 30 50° 0.6 60° 0.4 Forward Current, If 25 20 15 10 70° 0.2 80° 5 0 0 10 20 0 90° 30/04/04 30 40 50 60 70 80 90 Ambient Temperature DomiLED Gap DDx-GJS -I1 Catalogue-v3.doc Page 5 of 5 100 DOMINANT Semiconductors Taping And Orientation. Reels come in quantity of 2000 units. Reel diameter is 180 mm . 30/04/04 DomiLED Gap DDx-GJS -I1 Catalogue-v3.doc Page 6 of 6 DOMINANT Semiconductors Recommended Sn-Pb IR-Reflow Soldering Profile. Classification Reflow Profile (JEDEC J-STD-020C) 275 250 o 235-240 C 10-30s Temperature (oC) 225 Ramp-up 3 oC/sec max. 200 183 oC 175 60-150s 150 125 Ramp-down o 6 C/sec max. 100 Preheat 60-120s 75 50 360s max 25 0 50 100 150 200 Time (sec) Recommended Pb Free IR-Reflow Soldering Profile. Classification Reflow Profile (JEDEC J-STD-020C) 300 275 Temperature ( oC) 250 Ramp-up 3 oC/sec max. 217 oC 225 260-255oC 10-30s 200 60-150s 175 150 125 Ramp-down 6 oC/sec max. 100 Preheat 60-180s 75 50 480s max 25 0 50 100 150 200 Time (sec) 30/04/04 DomiLED Gap DDx-GJS -I1 Catalogue-v3.doc Page 7 of 7 DOMINANT Semiconductors NOTE. All the information published is considered to be reliable. However, DOMINANT Semiconductors does not assume any liability arising out of the application or use of any product described herein. DOMINANT Semiconductors reserves the right to make changes at any time without notice to any products in order to improve reliability, function or design. DOMINANT Semiconductors products are not authorized for use as critical components in life support devices or systems without the express written approval from the managing director of DOMINANT Semiconductors. 30/04/04 DomiLED Gap DDx-GJS -I1 Catalogue-v3.doc Page 8 of 8